Digital twin modeling method based on biomimicry for machining aerospace components

High-performance aerospace component manufacturing requires stringent in-process geometrical and performance-based quality control. Real-time observation, understanding and control of machining processes are integral to optimizing the machining strategies of aerospace component manufacturing. Digital Twin can be used to model, monitor and control the machining process by fusing multi-dimensional in-context machining process data, such as changes in geometry, material properties and machining parameters. However, there is a lack of systematic and efficient Digital Twin modeling method that can adaptively develop high-fidelity multi-scale and multi-dimensional Digital Twins of machining processes. Aiming at addressing this challenge, we proposed a Digital Twin modeling method based on biomimicry principles that can adaptively construct a multi-physics digital twin of the machining process. With this approach, we developed multiple Digital Twin sub-models, e.g., geometry model, behavior model and process model. These Digital Twin sub-models can interact with each other and compose an integrated true representation of the physical machining process. To demonstrate the effectiveness of the proposed biomimicry-based Digital Twin modeling method, we tested the method in monitoring and controlling the machining process of an air rudder.     

Routing with multiple quality-of-services constraints: An approximation perspective

Finding a path that satisfies multiple Quality-of-Service (QoS) constraints is vital to the deployment of current emerged services. However, existing algorithms are not very efficient and effective at finding such a path. Moreover, few works focus on three or more QoS constraints. In this paper, we present an enhanced version of fully polynomial time approximation scheme (EFPTAS) for multiconstrainted path optimal (MCOP) problem. Specifically, we make four major contributions. We first allow the proposed algorithm to construct an auxiliary graph, through which the QoS parameters on each of the finding path can be guaranteed not to exceed the given constraints. Then we adopt a concept, called nonlinear definition of path constraints in EFPTAS for reducing both time and space complexity. Also, we enable EFPTAS to run iteratively to facilitate a progressive refinement of the finding result. In addition to these, we identify some “deployment” issues for proposed algorithm, the essential steps that how and when the EFPTAS takes place are presented. By analyzing the proposed algorithm theoretically, we find that the presented EFPTAS can find a (1+ε)-approximation path in the network with time complexity O(|E||V|/ε) (where |E| is the number of edges and |V| is the number of nodes), which outperforms the previous best-known algorithm for MCOP. We conduct an extensive comparison between the algorithm presented in this paper and previous best-known study experimentally, our results indicate that EFPTAS can find a path with low complexity and preferable quality.     

激光焊接对接拼缝测量的微景深方法

对于复杂微细、错边量小的激光焊接拼缝测量,现有的视觉传感器方法不能稳定、可靠地提取出拼缝的中心位置、拼缝宽度等信息。为此,提出了基于微景深的激光焊接对接拼缝测量方法,该方法采用高倍光学放大镜头、工业CCD(Charge Coupled Device)/CMOS(Complementary Metal-Oxide-Semiconductor Transistor)相机和LED(Light-Emitting Diode)外部照明装置,以光学成像光轴与被测表面法矢呈45°的方式,组成的对接拼缝的非接触测量系统,既解决了显微放大时景深很小、测量范围小的问题,又解决了狭窄拼缝高光学放大倍数拼缝检测的难题。实验结果表明,该系统可快速准确地提取出拼缝中心坐标、拼缝宽度以及拼缝局部表面法矢。拼缝宽度测量精度优于5 μm,拼缝中心测量精度优于6 μm,可识别的最小拼缝宽度为0.02 mm,完全满足激光焊接对接狭窄拼缝的检测与自动跟踪的要求。     

基于自动机理论的密码匹配方法

针对用户安全登录问题,提出了一种基于自动机的密码匹配模型.首先,对于用户任意输入的密码进行同态映射加密; 其次,构造出可接受加密密码的自动机——状态数目可变自动机(VNS - DFA),该自动机不仅能够匹配加密密码,同时还可以输出加密密码的同态原像以及匹配成功的次数; 最后,在状态数目可变的自动机上对用户输入的密码进行实验验证表明,用户建立的密码经过同态映射后可全部被该自动机接受,且该自动机的时间复杂度优于传统的DFA以及改进的DFA.     

布尔表达式匹配问题研究*

提出了布尔表达式匹配问题,并给出了它的形式化定义;提出了一个解决布尔表达式匹配问题的通用算法框架,并在此框架上给出了一种算法及其改进;通过理论分析和实验数据给出了影响布尔表达式匹配算法性能的因素和它们之间的关系.     

SPEM2XPDL模型转换研究*

将软件过程技术与工作流技术相结合,严格定义了SPEM2XPDL模型转换规则,设计并实现了一个SPEM2XPDL模型转换引擎.此引擎将SPEM描述的软件过程转换为符合工作流定义(XPDL)的工作流过程,从而可基于工作流管理系统对软件过程提供执行支持.SPEM模型经引擎转换后在工作流管理系统Shark上的成功执行表明了引擎的可用性.     

工作流技术在ASP公共服务平台中的应用研究*

根据项目特点,建立了适合ASP平台的基于协调理论和反馈机制的扩展活动网络模型,采用XML模式的XPDL规范实现过程定义;然后通过DOM解析XML数据文档和J2EE的技术支持实现了系统的轻量级工作流引擎.详细介绍了系统实现中解决的两个关键问题:事务型操作的处理和并发控制,并提出了基于优先级的锁绑定机制.     

Interfacial energy and match of cold pressure welded Ag/Ni and Al/Cu

The technology of cold pressure welding was adopted to achieve the bonding of Al/Cu(limited soluble and forming compounds),Ag/Ni(hardly mutual soluble),and the relative state of interface was tested by HREM.The results indicate that stable interface is always corresponding to the low interfacial energy value;the stable interface is not coherent but partly-coherent because of the twisting of grain boundary caused by pressure,meanwhile existing dislocation.Namely,the interfacial match and other states under the condition of cold pressure welding are different from the situation that under the condition of thermal action.Moreover,theoretical analyses and calculation on the base of thermodynamics,crystallogeny ,solid physics etc,were discussed.     

牙科陶瓷配色方法和应用的初步研究

探讨牙科陶瓷配色的方法和机理，通过将钒锆黄、锆镨黄、锆铁红、铬铝锌红对牙科陶瓷进行配色。采用分光光度计测量了样品的L＊、a＊、b＊值和色差，并与VitaA2和ceramcoA2瓷粉对比，研究了样品色差与配方之间的关系。     

基于几何统计差异性的伪造印鉴识别方法

针对印鉴识别任务中有效印文的提取以及伪造印鉴的识别这两个难点问题,建立在监督分类体系下的印鉴识别系统.利用有效印文与背景的颜色统计差异以及真伪印鉴间的几何统计差异分别解决上述难点.在构建的包含3000个印鉴的印鉴数据库上进行实验,实验结果表明,该方法对于有效印文的提取准确率可达到(95.27±3.73％),对于伪造印鉴的识别准确率可达到97.62％,具有可行性和有效性.