车联网基于信任度的RSU识别及资源分配算法

在车联网中,由于部分路侧单元（RSU）的位置比较偏远,无法得到网络管理员的及时维护,可能遭到攻击,变为不可信任的路侧单元,降低了车辆的通信质量和网络能效.为了有效地识别RSU的可靠性,提出了一种基于信任度的路侧单元识别及资源分配算法,将路侧单元识别、传输模式的选择和功率分配联合建模为网络能效的优化问题,并分成3个子优化问题,分别求解.首先,采用基于信任度的RSU识别算法,识别出可信任和不可信任的路侧单元;其次,优化车辆资源块配置和链路选择;最后,通过次梯度算法优化传输功率,最大化网络能效.理论分析和仿真结果表明,所提算法具备较低的复杂度,可以达到较高的路侧单元识别准确度,并有效地提升网络总能效.     

过热度对电脉冲孕育处理Al-5%CU合金凝固组织的影响

研究了不同的过热度对电脉冲孕育处理Al-5％Cu合金凝同组织的影响。实验结果表明：不同的过热度下对Al-5％Cu合金进行电脉冲处理，合金凝同组织均得到一定程度的细化，但过热度不同时细化效果不同。一定温度范围内．熔体温度为740℃时，电脉冲孕育处理细化的效果最好，并分析了过热度影响电脉冲孕育处理Al-5％Cu合金凝同组织的机制。     

大学生求学满意度实证研究--某高校学生个体特征对满意度单项要素的影响分析

求学满意度，又称为求学满意程度，它取决于教育需求主体对教育服务的预期同其实际所感知的教育服务水平的对比。教学计划、教学组织、教师教学、教学设施、校园环境、学生5知识技能等都是影响求学满意度的因素。本文在调查取得基本数据的基础上，使用相关的统计检验方法，分析了性别、生源地和不同年级这些学生个体地征对求学满意度单项要素的影响。主要结论有：学生性别差异对满意度单项要素的影响基本是随机的；不同生源地的学生对教学计划和管理制度两个要素的评价具有差异；不同年级的学生对教学设施和知识掌握程度的评价具有显著性差异；学生对学校服务评价单项因素差异很少，总体满意度在一定程度上反应学校的实际情况。     

基于模糊控制的钛板冲压成形难度可靠性预测研究

提出了航空用钛板材总体成形难度评价理论,并基于模糊控制思想给出预测评估方程,建立了预测评估精度等级体系,并应用不同的各向异性屈服准则,对TC1、TC2类钛板材拉深成形屈服和破裂难度建立了总体预测评估方程,结合TC2类钛板材应变目标样本,给出了具体实例的预测结果,对加速我国飞机国产化的进程具有重要现实意义。     

石墨化率不同的自焙炭块的热膨胀

采用精密垂直拉杆膨胀仪在１４～１０００℃范围内测量了具有不同石墨化率的自焙炭块的相对热伸长量，并由此获得了热线膨胀系数α。结果表明：石墨化率一定时，α值在较低温度下随温度升高而增加，在较高温度下，α值随温度变化不明显；恒温时，石墨化率越高，α值越低。讨论了单位热应力下的弹性模量概念     

聚铝溶液pH值及盐基度的相关性研究

为聚铝溶液进行了ＰＨ值和盐基度的分析和估算,给出了聚铝溶液的极限ＰＨ值和极限盐基度与总溶解铝浓度的关系曲线,最终计算结果表明：在平衡条件下,聚铝溶液的ＰＨ值和盐基度具有相关性,即当基中一个参数发生变化时。另一个参数必然要发生相应的改变。     

弯道岸坡上粗细泥沙统一起动流速公式

该文基于概率论与泥沙起动基本理论,考虑了起动概率、相对暴露度与细颗粒泥沙间黏结力和附加下压力对泥沙起动的影响,采用滑动起动模型,从理论上推导出了适用于弯道岸坡上粗、细泥沙颗粒起动的统一流速公式,完善了已有研究成果对泥沙起动概率考虑的不足。公式综合了弯道岸坡、顺直岸坡、正负坡及平坡等条件下粗细泥沙颗粒起动流速计算,可简化为各简单条件下泥沙起动流速公式。通过各简单条件下泥沙起动流速实测资料验证,该文公式与实测数据符合良好。     

Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1,2,3,4‐butanetetracarboxylic acid

Ramie yarns were treated with various concentrations of NaOH at room temperature and subsequently crosslinked with 1,2,3,4‐butanetetracarboxylic acid (BTCA). The microstructure and tensile properties of the treated yarns were characterized. X‐ray diffraction (XRD) and FTIR were used to study the crystalline structure of the resultant ramie yarns. The results showed that the maximum change in the structure of the alkali‐modified ramie took place at 16% NaOH, which would completely transform cellulose I to cellulose II. At the same time, the crystallinity index and fiber orientation decreased to the minimum value while the absorption properties were enhanced. The average degree of polymerization (DP ) of the treated ramie yarns slightly decreased after NaOH treatment. Tensile properties including tenacity, breaking elongation, and modulus of the treated yarns were also investigated. Scanning electron microscopy (SEM) was used to investigate the breakage of the treated yarns. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1857–1864, 2004     

Time dependences of conduction and self‐heating in acetylene carbon black‐filled high‐density polyethylene composites

The time dependences of electrical conduction and self‐heating behaviors in high‐density polyethylene filled with acetylene carbon black of 0.082 in volume fraction are studied in relation to voltage and ambient temperature. The characteristic decay current constant τ_i, and the exponential growth time constant for self‐heating τ_g are determined for the samples under voltages U above the critical value U_c for the onset of self‐heating. The influences of voltage and ambient temperature on τ_i and τ_g as well as the amplitude of the low‐resistance to high‐resistance switching are discussed on the basis of the random resistor network (RRN) model and the relationship between U_c and the intrinsic resistivity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1124–1131, 2006     

Emission of excited potassium species from an industrial iron catalyst for ammonia synthesis

The angular dependence of potassium emission-desorption is studied from a fused iron catalyst of the type used for ammonia synthesis. The excited species (K^*, K _n ^* , etc.) and positive ions K⁺ have strongly different angular distributions. The bilobular distribution measured for ion desorption is concluded to be either due to excited atoms, so-called Rydberg atoms, or excited clusters. Both types of species have to desorb from the edges of the sample and become field ionized and deexcited just outside the sample, as reported in previous studies on an iron oxide catalyst. The peak in the normal direction measured for excited species is due to excited cluster formation outside the catalyst surface. Similarities with previous results for other catalysts are observed. The possibility that the promoter function of potassium in the ammonia synthesis is due to excited species is pointed out.On leave from Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Cracow, Poland.