聚铝溶液pH值及盐基度的相关性研究

为聚铝溶液进行了ＰＨ值和盐基度的分析和估算,给出了聚铝溶液的极限ＰＨ值和极限盐基度与总溶解铝浓度的关系曲线,最终计算结果表明：在平衡条件下,聚铝溶液的ＰＨ值和盐基度具有相关性,即当基中一个参数发生变化时。另一个参数必然要发生相应的改变。     

不同养护方式对水泥-锂渣浆体水化程度影响

为了分析水泥-锂渣浆体的水化程度, 采用高温煅烧法测试各龄期的化学结合水, 结果发现:水泥-锂渣浆体的化学结合水量随龄期的延长而增加, 水化3 d和7 d时能达到水化90 d时的60%和80%。高温养护、碱激发、高温和碱激发均能提高锂渣复合水泥基材料早期的化学结合水量, 最高可达3~4倍, 提高的幅度依次为碱激发和高温养护＞碱激发＞高温养护＞标准养护。高温和复合环境养护也能提高水泥的水化程度, 1~28 d内, 锂渣掺量在40%以内时, 水泥水化程度相对指数(ψ值)均大于1;掺量为60%时, ψ值均小于1。综上, 高温养护、碱激发、高温和碱激发均能提高锂渣和水泥的水化程度, 高温和碱激发复合作用时较为显著。     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

弯道岸坡上粗细泥沙统一起动流速公式

该文基于概率论与泥沙起动基本理论,考虑了起动概率、相对暴露度与细颗粒泥沙间黏结力和附加下压力对泥沙起动的影响,采用滑动起动模型,从理论上推导出了适用于弯道岸坡上粗、细泥沙颗粒起动的统一流速公式,完善了已有研究成果对泥沙起动概率考虑的不足。公式综合了弯道岸坡、顺直岸坡、正负坡及平坡等条件下粗细泥沙颗粒起动流速计算,可简化为各简单条件下泥沙起动流速公式。通过各简单条件下泥沙起动流速实测资料验证,该文公式与实测数据符合良好。     

华北平原地下水资源承载力评价

华北平原地下水严重超采,并带来一系列资源环境问题,地下水资源承载力的可持续性面临严重挑战。本研究定义了地下水资源承载力的概念,提出了一种定量评价地下水承载力的新方法,并对华北平原地下水承载力进行了评价。结果表明,华北平原地区地下水资源支撑的GDP从2003年的15 608.18亿元迅速提高到2011年的37 584.9亿元,33.3%的地市位于未超采未超载区;华北平原整体及57.2%的地市均位于超采未超载区,已发生地下水超采,但通过提高用水效率,未来社会经济规模仍有发展空间;9.5%的地市位于超采超载区。最后探讨地下水资源的承载力的提高途径,主要包括增加地下水资源可利用量和提高用水效率两方面,其中提高用水效率效果更显著。     

横流环境中两孔热水浮射流数值模拟研究

为了达到热废水排放过程中热水快速稀释的目的,采用Fluent中Realizable k-ε模型基于SIMPLEC算法,研究了热射流过程中,射流孔间距、初始流速对射流流场、温度场的影响规律。研究表明:随着射流孔间距的增大,第1孔射流对第2孔射流影响程度逐渐减弱且第2孔射流的弯曲程度随之增加;射流与横流作用促使反向涡对的产生,加快了热水与环境水体的掺混度,横断面温度场出现"肾形"分布;当相对孔间距相同时,随着射流初始流速的增加,第1、2孔射流温度衰减速率随之增大;射流初始流速相同时,射流孔间距的增加对第1孔射流轴线温度稀释度影响较小,对第2孔射流的轴线温度稀释度影响相对复杂;S/D=2时,增大热射流的初始流速,为本研究中热水快速稀释的最优方案。     

Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1,2,3,4‐butanetetracarboxylic acid

Ramie yarns were treated with various concentrations of NaOH at room temperature and subsequently crosslinked with 1,2,3,4‐butanetetracarboxylic acid (BTCA). The microstructure and tensile properties of the treated yarns were characterized. X‐ray diffraction (XRD) and FTIR were used to study the crystalline structure of the resultant ramie yarns. The results showed that the maximum change in the structure of the alkali‐modified ramie took place at 16% NaOH, which would completely transform cellulose I to cellulose II. At the same time, the crystallinity index and fiber orientation decreased to the minimum value while the absorption properties were enhanced. The average degree of polymerization (DP ) of the treated ramie yarns slightly decreased after NaOH treatment. Tensile properties including tenacity, breaking elongation, and modulus of the treated yarns were also investigated. Scanning electron microscopy (SEM) was used to investigate the breakage of the treated yarns. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1857–1864, 2004     

Time dependences of conduction and self‐heating in acetylene carbon black‐filled high‐density polyethylene composites

The time dependences of electrical conduction and self‐heating behaviors in high‐density polyethylene filled with acetylene carbon black of 0.082 in volume fraction are studied in relation to voltage and ambient temperature. The characteristic decay current constant τ_i, and the exponential growth time constant for self‐heating τ_g are determined for the samples under voltages U above the critical value U_c for the onset of self‐heating. The influences of voltage and ambient temperature on τ_i and τ_g as well as the amplitude of the low‐resistance to high‐resistance switching are discussed on the basis of the random resistor network (RRN) model and the relationship between U_c and the intrinsic resistivity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1124–1131, 2006     

Emission of excited potassium species from an industrial iron catalyst for ammonia synthesis

The angular dependence of potassium emission-desorption is studied from a fused iron catalyst of the type used for ammonia synthesis. The excited species (K^*, K _n ^* , etc.) and positive ions K⁺ have strongly different angular distributions. The bilobular distribution measured for ion desorption is concluded to be either due to excited atoms, so-called Rydberg atoms, or excited clusters. Both types of species have to desorb from the edges of the sample and become field ionized and deexcited just outside the sample, as reported in previous studies on an iron oxide catalyst. The peak in the normal direction measured for excited species is due to excited cluster formation outside the catalyst surface. Similarities with previous results for other catalysts are observed. The possibility that the promoter function of potassium in the ammonia synthesis is due to excited species is pointed out.On leave from Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Cracow, Poland.     

玉米芯木聚糖硫酸酯化条件的研究

用碱提法从玉米芯中提取木聚糖,采用氯磺酸吡啶法进行硫酸酯化,通过正交试验确定最佳工艺条件为:吡啶与氯磺酸摩尔比1∶1,温度65℃,时间6h;木聚糖硫酸酯wisX-S通过DEAESepharoseFF层析柱分离得到一个相对分子量为1.3×104的组分,硫酸基取代度为2.24。对此木聚糖硫酸酯进行红外光谱分析,结果显示在波数1259、1228和813cm-1处分别有S=O和C-O-S键的特征吸收峰。