影响固态发酵速率的因素及其动力学

论述了固态发酵过程中基质的形态特性、基质含水量、通气速率与气体组成、发酵温度诸因素对发酵速率的影响；探讨了固态发酵过程动力学模型及其特征。     

Electrochemical properties of boron-carbon-nitride films formed by magnetron sputtering

The electrochemical behavior of B_1.0C_2.4N_1.0 thin film was investigated in acidic, neutral and alkaline solutions. The anodic polarization curve of the film in 1 M NaOH showed the anodic dissolution of the film. The curve of the film in 1 M HCl showed no anodic dissolution. The cathodic polarization curve in 1 M NaCl showed shift to a negative potential side, but the anodic polarization curve was the same as that of Pt. The anodic dissolution in 1 M NaOH depended on potentials, that is, no anodic dissolution was recognized in a potential range of −0.2 to 0.1 V but the dissolution rate increased with increasing potential in a range of 0.1-0.6 V. The anodic current density of the film is directly proportional to the dissolution rate at potentials higher than 0.1 V. The dissolution rate of the film was increased with increasing solution pH.     

Electrooxidation of methanol at platinum–ruthenium catalysts prepared from colloidal precursors: Atomic composition and temperature effects

The electrocatalytic oxidation of methanol was investigated on PtRu electrodes of different atomic compositions at several temperatures (from 25 to 110 °C). Very active catalyst nanoparticles supported on active carbon (Vulcan XC 72) were obtained using the colloidal synthesis developed by Bönnemann et al. [11], allowing easy variation of the atomic composition. These electrocatalysts were characterized by TEM, EDX and XRD; results indicate that they consist of platinum nanoparticles decorated by ruthenium. Methanol oxidation was studied as a function of composition, temperature and methanol concentration. Two effects were investigated: the effect of the working temperature and the effect of the atomic composition. It appeared that for lower methanol electrooxidation overvoltages, the best catalysts are ruthenium-rich, whereas at higher overvoltages the best one is the Pt + Ru (80:20)/C composition, irrespective of the working temperature, either in half-cell or in a single DMFC.     

广西古代陶器组成的研究

桂林甑皮岩遗址发现了距今９２４０－１０３７０年的陶片，证实了广西地区从新石器以来就成为我国古代陶器的发源地之一。本工作研究了广西出土的４４块陶片，测定了陶胎的化学和矿物组成。由此表面广西古陶的ＳｉＯ２含量随时代变迁而逐渐增加，而Ｆｅ２Ｏ３含量在明显下降，Ａｌ２Ｏ３的含量也有降低的趋势。     

Differently sized native milk fat globules separated by microfiltration: fatty acid composition of the milk fat globule membrane and triglyceride core

The aim of this study was to characterize the fatty acid composition of the core and membrane of differently sized milk fat globules separated by microfiltration, which can now be used to manufacture dairy products. Native milk fat globules of various mean diameters, ranging from d₄₃ = 2.3 µm to 8.0 µm, were obtained using microfiltration of raw whole milk. After milk fat globule washing, the milk fat globule membrane (MFGM) and the triglyceride core (TC) were separated by manual churning. After total lipid extraction from each fraction, their fatty acid composition was characterized using methyl ester analysis by gas chromatography. Regardless of season, no significant differences were observed in the fatty acid composition of the MFGM phospholipids. Conversely, significant differences were found in the fatty acid composition of TC; particularly, small fat globule TC contained more medium‐chain fatty acids and less stearic acid than large fat globule TC. These results show that the previously observed differences in total fatty acid composition among differently sized milk fat globules are due to their triglyceride composition and MFGM amount rather than to the composition of the MFGM.     

Configurational statistics of copolymers prepared by complex-radical polymerization

Radical copolymerization is considered theoretically taking into account the effect of complexing on the configurational statistics of macromolecules formed. Akinetic model has been developed that considers, apart from the ordinary addition of single monomer units to a propagating chain, the possible addition of monomer unit pairs along with a complexing agent in the form of a ternary complex. Within the framework of this model, the problem of calculating the probabilities of formation of any sequences of monomer units (taking into account their microtacticity) in a macromolecule has been rigorously solved as well as the problem of finding the composition distribution of the copolymer formed. It has been shown that this distribution is described by a conventional Gauss law and the appropriate parameters are given. Possible generalizations of the suggested approach are indicated.     

企业信息系统多领域协同优化研究

企业信息化的前沿性问题是企业信息集成和优化。本文依据设计理论中的多学科协同优化的思想,将协同优化的概念引入到企业信息集成中。文中介绍了三种用于高层优化的算法,基于信息总线结构的EA I平台,提出了优化集成平台的构造方法。     

组成对分相-析晶乳浊釉显微结构及表面性质的影响

采用X射线衍射、透射电镜和扫描电镜等测试手段,研究了不同组成对分相-析晶乳浊釉显微结构及釉面性状的影响.研究表明:B2O3和P2O5能促进分相形成,并且由于分相具有很小的表面张力而使其液滴易于长大.适量引入CaO能使液滴尺寸增大,体积分数提高,但过量引入会由于析晶而使体积分数降低.控制分相液滴尺寸接近可见光波长以及使釉中析出适量钙钠长石晶体可获得最佳的乳浊效果,而液滴过大或过小都难以获得较佳的乳浊效果.     

Decomposition of timed automata for solving scheduling problems

A decomposition algorithm for scheduling problems based on timed automata (TA) model is proposed. The problem is represented as an optimal state transition problem for TA. The model comprises of the parallel composition of submodels such as jobs and resources. The procedure of the proposed methodology can be divided into two steps. The first step is to decompose the TA model into several submodels by using decomposable condition. The second step is to combine individual solution of subproblems for the decomposed submodels by the penalty function method. A feasible solution for the entire model is derived through the iterated computation of solving the subproblem for each submodel. The proposed methodology is applied to solve flowshop and jobshop scheduling problems. Computational experiments demonstrate the effectiveness of the proposed algorithm compared with a conventional TA scheduling algorithm without decomposition.     

Formal verification of collaboration patterns in healthcare

We propose a computer-based framework for the formal verification of collaboration patterns in healthcare teams. In this, the patterns are constructed diagrammatically as compositions of keystones that are viewed as abstract processes. The approach provides mechanisms for ensuring that safety properties are enforced and exceptional events are handled systematically. Additionally, a fully verified, executable model is obtained as an end product, enabling a simulation of its associated collaboration scenarios.