激光器绝热啁啾对光纤通信系统传输特性的影响

通过理论分析、实验和计算机模拟得到：进行直接强度调制时，体块型DFB激光器的总微分量子效率（与多量子阱DFB激光器相比）过低，从而导致其绝热啁啾占激光器啁啾的主要部分；用于无再生中继距离较大的强度调制／直接检测（IM／DD）光纤通信系统时，色散效应将导致信号脉冲上升沿压缩，使系统误码率增加。据此建议：在无再生中继距离大于100～120km的常规单模光纤IM／DD系统中，应采用多量子阱激光器。     

红外图像序列小目标检测预处理技术

文中就如何复杂背景条件下低信噪比的小目标检测概率问题展开了讨论，提出了用空间高通滤的方法改善图像质量，达以抑制背景噪声，增强小目标的目的，并交坑通滤波和中值滤波做了一个简单的比较，随后采用分层投票表决法对目标进行检测，取得了良好效果。     

直接基于灰度图象的多尺度角点检测方法

在计算机视觉领域中角点特征的提取具有相当重要的地位，因为角点包含了丰富的信息。本文提出了一种新的利用微分几何和小波变换的多尺度角点检测方法，它具有以下特点：一是无须提取边缘图象，而是直接在灰度图象上提取角点。二是由于利用了小波变换技术从多个尺度上进行角点的提取，所以它既较为有效的抑制了由于噪音等原因造成的诸多错误角点位置的出现，又能得到较为精确的有用角点位置。最后通过实验证明了本算法有效性。     

节流式差压流量计的发展和现状

文章介绍节流式差压流量计的特点及标准化进程，煤气流量测量中存在的难点以及正在试图解决的途径。     

A stochastic maximum principle for systems with jumps, with applications to finance

We consider a stochastic control problem with linear dynamics with jumps, convex cost criterion, and convex state constraint, in which the control enters the drift, the diffusion, and the jump coefficients. We allow these coefficients to be random, and do not impose any L^p-bounds on the control.

We obtain a stochastic maximum principle for this model that provides both necessary and sufficient conditions of optimality. This is the first version of the stochastic maximum principle that covers the consumption–investment problem in which there are jumps in the price system.     

模拟乘法器的简易分析方法

提出了一种模拟乘法器工作原理的简易分析方法，与通用的一般方法相比，这种方法避开了较复杂的数学推导，采用大学熟悉的公式从而使分析过程简便易懂。     

MV2000T智能变送器

较全面地介绍了ABB公司MV2 0 0 0T智能变送器的市场开发背景、工作原理、技术规格、性能特点及设计选型要点     

Melting and crystallization behaviour of elastoplastic semicrystalline copolymers: poly(ether ester)

The melting and crystallization behaviour of an elastoplastic semi-crystalline poly(etherester) has been studied by differential scanning calorimetry. The shape of the melting endotherm is strongly dependent on heating rate and annealing time and results from the sum of simultaneous melting and crystallization phenomena. Samples prepared by different techniques, i.e. by solvent evaporation or by melt extrusion, behave very differently owing to specific crystal morphologies. By applying the Hoffman-Weeks plot, the equilibrium melting temperature has been extrapolated. The Avrami treatment allows the calculation of the index n and of the rate constant K from the isothermal kinetic data.     

差热法测定钢样表面氧与体内氧的方法研究

本文利用美国LECO公司生产的TC-436氧氮仪,研究了光谱纯Fe2O3,Al2O3和在大量脱氧铁存在下Al2O3的氧释放曲线,得到了它们的分解功率、分解电流和分解计算温度.成功地分离了钢样的表面氧和体内氧,并对钢样不同表面氧的组成做了初步研究.     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.