通信瓶颈下的实时并行任务分配研究

提出了实时并行任务粒度划分的具体设计方法，采用了系统内通信迟延最小的约束条件进行多处理器上的任务分配，解决了高速实时信号处理中的数据通信瓶颈问题。在自行设计的超立方体结构的通用信号处理机上，实现了空时二维自适应信号处理和SAR实时成像，显著减小了数据通信迟延，提高了并行效率和性价比。     

基于DMF捕获系统频率选择性信道下捕获性能的分析

对基于数字匹配滤波器(DMF)捕获系统在频率选择性信道下的捕获性能进行了深入讨论，利用状态转移图推导出单次驻留判决方式时平均捕获时间的表达式，对平均捕获时间与多径分量的关系进行了数字分析。得出的主要结论是：对于多径分量为非衰落信号时，多径分量之间的能量差别越大，系统捕获性能越好，多径分量的能量相等时，系统捕获性能最差，且随着可以分离的多径路数的增加下降；对于多径分量为慢衰落信号时，多径信道的捕获性能好于单径信道(非频率选择性衰落信道)，且多径分量之间的能量差别越大，系统捕获性能越差，当多径分量的能量相等时，捕获性能最好，这与非衰落信道的情形相反。因此在频率选择性衰落信道中，采用分集接收可以改善系统的捕获性能。     

关于海面无线传播模型的探讨

现有文献中一般都认为海面环境的无线传播模型近似于自由空间传播模型，但在实际测试中发现，自由空间模型预测值与实测值差别较大，不能很好地解释此类环境的信号传播。笔者根据多次海面覆盖测试的数据，分析并拟合出了新的海面传播模型。     

宏蜂窝模型的传播模型校正研究

详细介绍了 宏蜂窝传播模 型校正的基本操作流程 结果分析及注意事项 对工程 ,人员了解和开展模型校正工作有一定的指导作用 。     

透析3G在中国面临的重重困局(1)--牌照与标准选择

探讨了中国3G牌照何时发放、发放数量、牌照与标准是否捆绑、3G产业链如何搭建、频率如何分配、市场容量和终端等问题，并对此提出了建设性的意见。     

Fault-aware Communication Mapping for NoCs with Guaranteed Latency

As feature sizes shrink, transient failures of on-chip network links become a critical problem. At the same time, many applications require guarantees on both message arrival probability and response time. We address the problem of transient link failures by means of temporally and spatially redundant transmission of messages, such that designer-imposed message arrival probabilities are guaranteed. Response time minimisation is achieved by a heuristic that statically assigns multiple copies of each message to network links, intelligently combining temporal and spatial redundancy. Concerns regarding energy consumption are addressed in two ways. First, we reduce the total amount of transmitted messages, and, second, we minimise the application response time such that the resulted time slack can be exploited for energy savings through voltage reduction. The advantages of the proposed approach are guaranteed message arrival probability and guaranteed worst case application response time.     

Review of The parent-child connection.

[Correction Notice: An erratum for this article was reported in Vol 31(2) of Canadian Psychology Psychologie Canadienne (see record 2007-08913-001). In the October 1989 issue (Vol. 30, No. 4, p. 697), Arnold Rincover's affiliation with the Ontario Institute for Studies in Education was incorrectly given as Associate Professor. He has been an Extramural Instructor at O.I.S.E.] Reviews the book, The parent-child connection by Arnold Rincover (1988). The parent-child connection is a well written book that offers valuable advice to help parents of young children evaluate and understand their children's behaviour. It also offers useful suggestions on managing child behaviour, although these parenting tips are most likely to be useful to those parents who least need them (i.e., those with numerous personal and social resources, whose children are presenting only minor behavioural difficulties). The two general themes of the book, child behaviour as communication and developmental norms as guidelines for deciding if behaviour is problematic, are well-suited to the purposes of a parent reference book. They offer an appropriate framework for discussing specific child behaviours and helping parents to determine if these behaviours are problematic in their children. This book is a welcome addition to the list of available parenting books, and may prove particularly useful for younger parents in need of accurate and understandable information about normal child development and behaviour. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.     

A heuristic algorithm for distributed control in manufacturing systems

Distributed Problem Solving Networks (DPSN) provide a means for interconnecting intelligent problem solver nodes that can solve only a part of a problem depending on their ability in the problem domain. The decomposition of a problem into subproblems, and the selection of nodes to solve them can be regarded as the generation of an AND/OR tree, and the solution of the problem as a search for a solution tree. Introducing measurements for the cost of a solution tree, we present an algorithm to find one having minimal cost under certain conditions. A Flexible Manufacturing System consisting of a network of flexible workcells is used as an example.     

A new FMS architecture based upon networked DSP servo technology

This paper presents a critical evaluation of existing FMS architectures and the academic and industrial design and development strategies used during their formulation. The paper seeks to address the need for, and value of, existing architectures within the industrial arena. More importantly however, this paper puts forward a new two-tier distributed control architecture for FMS based upon new (real-time) networkable DSP servo control methodologies developed by one of the authors for Softronics in Australia. The ramifications of these methodologies are substantial, not only in terms of FMS control, but in the overall simplification of such systems and the development of flexible fixturing devices over the coming decade. This paper also postulates on how new FMS architectures can be developed from such technologies and details why such architectures could be more appropriate to industry needs than those that are currently in existence.