一种无线传感器网络链式传输分簇路由协议

由于周围环境对无线传感器网络(WSNs)的影响,在布设到特殊环境下时会产生信号的衰减与损耗,导致通信不畅。针对此问题,提出一种以LEACH路由协议为基础适应特殊环境(长直空间)的新型路由算法。本算法采用链式传输,即从内部逐一将信号传输给距空间最外端且距基站位置较近的簇头,克服了内部节点死亡过快的问题。同时簇内采用链式传输并且改进簇头阈值与成簇半径,减小了能量消耗,提高了稳定性,克服了LEACH算法的不足。     

大型空分制氧站DCS调试技术

以宝钢集团浦钢60000 Nm3/h的大型空分制氧站DCS调试为基础,结合以往大型空分制氧站DCS调试经验,探讨了大型空分制氧站DCS调试的特点、施工组织、调试工艺及方法,并对控制回路试验、离心式压缩机防喘振控制组态、压缩机起停及控制逻辑、紧急停车及重要安全回路调试、组态临时变更管理等重点、难点及关键环节的调试技术进行了详细的总结、说明,旨在为其他同类工程提供参考与借鉴.     

高冲击玻纤增强聚丙烯的研制与应用

利用玻璃纤维、SBS橡胶和高密度聚乙烯增韧聚丙烯。增韧后的聚丙烯冲击强度是只用玻纤增强的2倍以上,而其它性能影响较小。     

玻璃钢筋混凝土的有限元计算与试验

钢筋混凝土广泛应用于土木工程领域，但其结构耐久性因钢筋本身的锈蚀成为现今急待解决的问题。人们一直在寻找对钢筋混凝土进行改良的途径，用玻璃钢筋代替普通钢筋是解决这一问题的一个有效的方法，为此进行了试验和ANSYS有限元分析，结果证明此法具有可行性。     

有色丙纶细旦棉型短纤维生产及纺纱技术研究

定性地分析和讨论有色PP细且棉型短纤维生产及其纺纱过程的主要因素,着重探讨有色母粒对成品纤维性能及纺纱过程的影响,确定最佳纺丝工艺条件,控制 PP 有色细且短纤维物理性能,以满足纺纱工艺要求.     

农作物秸秆增强氟石膏复合材料的微观结构研究

将玉米秸秆加入改性后的氟石膏中，研究改性剂、玉米秸秆对氟石膏复合材料结构性能的影响；并用苯丙乳液对玉米秸秆纤维进行表面处理，用以改善基体材料和增强材料的界面结合状况，由此显著提高制品性能。     

Morphology of conducting polymeric coatings: quantitative comparison between theory and experiment

The density profile of electrosynthesized polymeric layers on carbon fibers is obtained from gravimetric and scanning electron microscopy (SEM) data. The coating density ρ is found to decrease with increasing radial distance, r, subject to the power law . Based on a modified diffusion-limited aggregation (DLA) model, it is shown that lattice Monte Carlo simulation of the coating process predicts the experimentally observed power law exponent.     

用于光纤并带的UV固化胶粘剂性能的研究

研究了用于光纤带的紫外光固化胶粘剂的剥离性、柔韧性、拉伸强度和延伸率的影响因素。     

DCS在酸相法氯化聚乙烯生产中的应用

把DCS应用于酸法生产CPE中，描述了DCS的硬件配制，生产中的控制要点及自控方案，在工业化生产中取得了良好效果。     

Stability analysis and controller synthesis for discrete uncertain singular fuzzy systems with distinct difference matrices in the rules

This paper mainly studies an extended discrete singular fuzzy model incorporating the multiple difference matrices in the rules and discusses its stability and design issues. By embracing additional algebraic constraint, traditional discrete Takagi-Sugeno (T-S) fuzzy model can be extended to a generalised discrete singular Takagi-Sugeno (GDST-S) model with individual difference matrices E_i in the locally singular models, where it can describe a larger class of physical or non-linear systems. Based on the linear matrix inequality (LMI) approach, we focus on deriving some explicit stability and design criteria expressed by the LMIs for the regarded system. Thus, the stability verification and controller synthesis can be performed by the current LMI tools. Finally, some illustrative examples are given to illustrate the effectiveness and validity of the proposed approach.