中小企业集群演进动力机制的实证研究

在总结企业集群生成动力,发展动力与锁定效应的基础上,构建了企业集群演进的动力机制模型,利用河北省清河羊绒企业集群的调研数据进行了实证分析,在对各个影响因素的作用机制进行具体分析的基础上,将数据带入"企业集群演进动力作用机制模型",得出来现阶段对集群演进产生影响的主要因素.     

微小型工业汽轮机智能交流伺服调节系统研究

为了解决微小型工业汽轮机组调节控制系统设备简陋,动态响应和稳态精确度差的问题,提出了一种采用交流伺服电机和模糊PID控制的自动调节系统．在对调节系统部件特性数据进行分析的基础上,应用机理分析法建立了工业汽轮机交流伺服调节系统的数学模型,建立了以模糊PID控制和常规PID为主的控制器仿真模型,并利用MATLAB（SIMULINK）进行了动态仿真．结果表明,采用交流伺服电机作为执行器比传统的机械式调节系统具有更优良的动态和稳态性;采用模糊PID控制策略的调节系统在减少调节时间、改善动态品质方面均好于常规PID调节器．为工业汽轮机交流伺服调节系统的进一步研究提供了理论基础．     

企业家精神对企业动态核心能力影响的实证研究

以企业家精神和企业动态核心能力的测量维度研究为基础,提出二者影响关系的理论框架模型．通过对368家企业的深度访谈和问卷调查,运用结构方程模型方法对理论模型拟和度,企业家精神对企业动态核心能力影响的路径进行了实证研究．研究结果表明,企业家精神对企业核心能力存在显著、正向且直接的影响,为企业推动企业家精神的培育与企业核心能力的提升提供了相关建议．     

A Thermo-Mechanical Study of Some Epoxy Adhesives Subjected to Combined Dynamic and Static Stresses

The object of the present study was to investigate the effect of superimposed dynamic and static stresses on mechanical and thermal properties of some epoxy adhesives. It was found that combinations of shear creep and torsional oscillations, applied simultaneously to adhesive joints at temperatures within the glassy range of the adhesive, led to strengthening of the joints in shear and to an increase in the glass transition temperature of the adhesive. Similar loading stresses applied at temperatures close to the T_g of the adhesive, led to opposite effects on the above mentioned properties of the joints. The width of the glassy-rubbery transition of the adhesives increased, in the whole range of temperatures used in this study and for all epoxy compositions, as a result of subjecting the joints to superimposed dynamic and static stresses. The broadening of the glass transition was interpreted as a result of the stiffening of polymer network during the combined stressing experiments. A linear relationship was found between the area of endothermal peaks in the first DSC scan of specimens subjected prior to test to superimposed dynamic and static stresses at temperatures below T_g, and the shear strength of the joints. In agreement with this observation and with literature data, a linear relationship was revealed also between the glass transition temperature of the resins (measured in the first DSC scan) and the shear strength of the joints. Based on experimental observations and on some literature information, it was suggested that the strengthening of the joint, as well as the changes in thermal properties of the adhesives, are mainly due to physical processes, such as short-range orientation of network chains and an increase in intermolecular interaction between highly polar sites of the network. The possibility that superimposed stressing led to changes in chemical crosslinking was discussed but it seems that no such reactions occurred.     

智能电网中电动汽车充电的自适应电价控制方法

针对电动汽车的充电提出一种电价控制策略。聚合管理者集中管理电动汽车的电池,并且考虑用电高峰时电网的电能供给有限,通过电价控制调整充电的需求量。采用自适应动态规划,通过在线网络训练,得到最优的电价策略。仿真结果表明,该自适应电价控制方法能够通过学习电动汽车的移动性和充电过程,从而调整实际充电需求量至期望水平,保证智能电网的稳定运行。     

Research and Application of Dynamic Equation for Full Frontal Impact

Full frontal impact theory needs researching and exploring to satisfy the primary safety design of occupant restraint system,avoiding the increasingly "engineering"trend in order to develop and design safety vehicle. After occupant restraint system is simulated by using linear elastic stiffness k,the occupant-vehicle frontal rigid barrier impact model is established. Dynamic equation of dummy chest coupling vehicle is built for full frontal impact based on ordinary vehicle deceleration by Hooke law,and the equation is solved by comparing coefficient and satisfying boundary qualifications. While relative vehicle characteristic parameters are kept unchanging,the actual vehicle deceleration is fitted to the simplified equivalent square wave( ESW),tipped equivalent square wave( TESW) and equivalent dual trapezoids wave( EDTW). Phase angle  and amplitude A of dynamic equations based on ESW,TESW and EDTW are calculated and deduced. The results show that: the dynamic equation of dummy chest coupling vehicle can be well utilized to instruct the primary safety design of full frontal impact for objective vehicle to satisfy chest deceleration demands and the equation based on TESW is best for this design.     

Finite difference method for dynamic response analysis of anchorage system简

Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.     

注塑产品动态装配模型的集成知识模型研究

基于MBR(基于模型的推理)技术，建立了注塑模具动态装配结构模型；基于RBR(基于规则的推理)技术，应用面向对象的规则模型(OOR)，建立了动态装配规则的知识表示模型。最后，该文将两种知识表示模型集成，建立了完整的知识模型，为整个系统的后续工作奠定了基础。     

数控机床位置伺服在线调试与动态性能分析研究

介绍一种在数控机床位置伺服系统在线调试中应用系统动态性能分析方法的基本原理，给出了一种位置伺服系统动态响应曲线、动态性能分析及其主要技术指标的实例。