Flow stress and softening behavior of wrought magnesium alloy AZ31B at elevated temperature

1　INTRODUCTIONThewroughtmagnesiumalloyshaveexcellentspecificstrengthandstiffness ,machinability ,dampcapacity ,dimensionalstability ,lowmeltingcostsandare ,hence ,veryattractiveinsuchapplicationsasau tomobile ,aviation ,electronicandcommunicationin dustry[16 ] .Investigationsontheflowstressandsofteningbehaviorofmagnesiumalloysathigherformingtem peratureandstrainratehavebeenanimportantsub jectinwroughtmagnesiumalloysforming[710 ] .InthispapertheflowstressandsofteningbehaviorofAZ31Bdeform…     

纯铜动态再结晶的Monte Carlo法模拟

本文建立了一种基于能量判据的确定动态再结晶各个阶段临界应变的方法，并基于此种方法Monte Carlo(MC)法进行了纯铜动态再结晶的二维模拟，定量计算了变形引起的存储能与变形之间的关系，计算出了发生动态再结晶的临界应变。模拟结果表明，采用MC法可以揭示动态再结晶的形核生长过程与应变历史之间的关系。结合本文所建立的基于能量判据的确定动态再结晶各个阶段临界应变的方法，可以预测开始发生动态再结晶的临界变形条件。     

Influence of initial textures on dynamic recrystallization and textures in AZ31 magnesium alloys

1　INTRODUCTIONMagnesiumisthelightestmetallicstructurema terialwithhighspecificstrengthandthereforeiswidelyusedinautomotive ,electronicsandaerospaceindustries[1,2 ] .However ,magnesiumoftenshowsinsufficientplasticityatroomtemperatureduetoitsHCPstructurewithlessindependentsystemsofbasalslip .Toenhanceformabilityofmagnesium ,ahigherdeformingtemperatureisusuallyusedwithtwopur poses .Thefirstistoactivatenewslipsystemsbesidesbasalslip ,sothatmorethanfiveindependentslipsystemscanbeprovided ,be…     

基于遗传算法的产品制造的优化调度

研究了企业产品制造的调度问题 ,并建立了调度的最小模型。引入效率函数 ,运用遗传退火进化算法实现了调度决策的优化 ;提出了将遗传退火算法和分派规则相结合的调度策略和动态编码的方法 ,放宽了约束条件 ,提高了搜索效率和速度 ,保证其全局收敛性。     

含Ti微合金钢动态再结晶行为及模型研究

采用Gleeble 3800热力模拟实验机,研究了一种Ti微合金钢在850～1 150℃、0.1和1.0 s-1条件下的变形奥氏体的动态再结晶行为及再结晶后奥氏体晶粒尺寸的演化规律。结果表明:形变激活能与变形条件相关,随着应变速率的增加而增加;Avrami指数m同样与变形条件有关;对实验数据进行回归分析后建立的Ti微合金钢动态再结晶的特征应变、特征应力、动力学以及稳定状态晶粒尺寸的数学模型精度较高。     

聚酯的摩尔质量与机械性能研究——Ⅰ.动态力学性能

应用粘弹谱仪考察了不同摩尔质量的聚酯(PET、PBT、PBT/PET)的动态力学性能,结果表明摩尔质量增大将提高其模量,但亦导致结晶速度变慢,使测得的模量反而比摩尔质量较低的试样小.     

The dynamic adsorption of benzene vapor on the ACF activated by phosphoric acid

The dynamic adsorption behaviors of benzene vapor on phosphoric acid‐activated carbon fiber (ACF‐P) were investigated by gas chromatography. The experimental results showed that ACF‐P that was activated at >350^°C, like steam‐activated carbon fiber (ACF‐W), has good dynamic adsorption properties for benzene vapor. However, the saturation adsorption capacities of ACF‐P and ACF‐W are different. The dynamic adsorption conditions apparently do not affect the effluent concentration before the breakthrough point, but do change the operation loading and usage efficiency. The adsorbed ACF‐P can be regenerated, and good dynamic adsorbability can be recovered by heating treatment. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1841–1847, 2002     

聚氨酯-聚丙烯酸酯复合乳液的动态力学性能

采用种子乳液聚合法合成了聚氨酯一聚丙烯酸乙（丁）酯[PU／PE（B）A]复合乳液。并研究了不同组成对复合乳液性质、相客性、阻尼性能及拉伸性能的影响。耐水性及稳定性测试表明，随PE（B）A含量的增加，涂膜的耐水性变好，而乳液的稳定性变差。动态力学性能测试（DMS）表明，合成的PU／PE（B）A复合乳液为半相容体系，其相容性随PE（B）A含量的增加而增强。DMS和拉伸试验表明PU／PEA／P（B）A（质量比50／25／25）复合乳液具有优良的阻尼性能、抗拉强度和断裂伸长率，可用作宽温域阻尼涂料。     

Measurement of Adhesive Bond Properties Including Damage by Dynamic Mechanical Thermal Analysis of a Beam Specimen

A method to obtain mechanical properties using a bonded (double) cantilever beam (or three point bend) specimen loaded in a manner to produce pure shear in the adhesive layer is reviewed. A revised mathematical solution which allows for easier interpretation of optimum beam dimensions to the one originally developed by Moussiaux, Cardon and Brinson for the static case is presented. An extension of this solution for a fixed/fixed viscoelastic beam under steady state oscillations developed by Li, Dickie and Morman is also discussed. Previous results using a vibrating beam to determine the complex viscoelastic properties of a bonded beam are reviewed. These results demonstrate conclusively that dynamic mechanical thermal analysis (DMTA) measurements discriminate differences in surface treatments and various environmental conditions. New measurements are presented that indicate the DMTA procedure can be used to quantify damage simulated by imbedded flaws in beams. The procedure is also shown to assess the effects of both humidity and corrosive environments on lap specimens. It is suggested that this technique may ultimately provide a method to quantify the amount of hidden damage in an adhesive joint subjected to fatigue, moisture or corrosive environments.     

2000—2014年辽宁省植被动态演变特征分析

基于MODIS － NDVI 数据,辅以线性回归法与分段线性回归法,并借助ArcGIS 软件,对辽宁 省2000—2014 年植被覆盖的动态演变过程进行分析。结果表明: ( 1) 时间上,辽宁省植被NDVI 在年 际尺度上呈现出明显的增大趋势,2005 年出现突变,多年平均NDVI 值为0. 496; 春季、夏季、秋季 以及植被生长季NDVI 突变年份分别为2006 年、2005 年、2009 年和2004 年,秋季波动变化的突变点 明显滞后; 植被生长最旺盛的季节为夏季,且集中于8 月。( 2) 空间上,辽宁省植被覆盖具有明显的 地域性差异,呈现出东部高、中西部低的分布特征; 辽宁省植被覆盖优良区与辽东山地的界限基本吻 合,植被覆盖贫乏区主要集中在朝阳市和阜新市的东北部地区。( 3) 辽宁省植被覆盖程度呈山地阴坡 高于阳坡的形态,并且植被覆盖程度最好的坡向为北偏西方向。( 4) 2000—2014 年辽宁省植被覆盖度 整体以维持现状和轻微改善为主,保持不变的区域集中于中东部地区,辽阳市与沈阳市一带有轻微退 化现象,辽西北地区改善情况较为明显。