二维多孔数控钻床加工路径的生成及优化

印刷电路板 PCB的加工是二维多孔数控钻的典型。实践表明加工同一零件不同的走刀路径其长度相差极大。为提高生产率 ,应使刀具的走刀路径尽量短 ,这其实是大型的 TSP问题。本文提出了几种路径的生成方法 ,分析了各自的适用场合。并用实例验证所提出的路径生成方法可极大地提高实际钻孔的加工效率。     

Neuroticism and depressive symptoms among spouse caregivers: Do health behaviors mediate this relationship?

This study examined the mediating role of health behaviors in the relationship between neuroticism and depressive symptoms among spouse caregivers. Path analysis was used to test a model of the caregiver stress process among 233 caregivers of people with dementia. Results indicate that neuroticism has a significant direct effect on depressive symptoms and also indirectly influences depressive symptoms through health behaviors and perceived stress. When individual health behaviors were examined in the path model, only physical activity served a significant mediating role. These findings suggest that neuroticism may lead to depressive symptoms among caregivers partly through declines in physical activity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

VLSI Implementation of Forward Error Control Technique for ATM Networks

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very‐large‐scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a 5 ° 5 matrix of data cells in a Virtex‐E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.     

中国工程勘察设计咨询业产业整合的路径选择

产业是由具有相互联系、相互制约的若干组成部分结合在一起并且有特定动能的有机体,产业分工越合理,资金、人力资源和各种自然资源与物质资料在产业内发挥的功能越大;中国工程勘察设计业的产业结构“中间大,两头小”,产业内部资源分布极不合理;结构调整的最佳选择是以工程项目总承包和分包为分工协作的垂直一体化:分化重组中间的工程咨询单位,组建顶端的EPC工程公司,发展低端的专业咨询公司、事务所。     

Triple tangent flank milling of ruled surfaces

This paper presents a positioning strategy for flank milling ruled surfaces. It is a modification of a positioning method developed by Bedi et al. [Comput Aided Des 35 (2003) 293]. A cylindrical cutting tool is initially positioned tangential to the two boundary curves on a ruled surface. Optimization is used to move these tangential points to different curves on the ruled surface to reduce the error. A second optimization step is used to additionally make the tool tangent to a rule line, further reducing the error and resulting in a tool position, where the tool is positioned tangential to two guiding rails and one rule line. The resulting surface has 88% less under cutting than the method of Bedi et al.     

一种新的机器人手臂控制方法

从机器人手臂的关节电机力学出发，本文提出了一种独立于现行机器人关节控制器的离线补偿方法，通过对－２自由度机器人的数值研究，证明该法不仅能有效地克服由于惯性负载，关节间耦合与重力效应给控制系统带来的动态精度问题，而且还可以消除由于控制系统本身的固有特性所决定的系统的跟踪误差。     

大规模电力系统不对称短路的分块射影解法

本文把网络的分块射影法用于大规模电力系统不对称短路的分析计算。研究表明：该方法对短路计算是可行的。一旦求出了射影张量，即可重复用于后续的计算，只需改变故障所在的那一个子网络的射影张量。本文提出的网络分块射影算法为大规模电力系统的分析计算提供了一条崭新的途径。     

Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

On the relationships among latent variables and residuals in PLS path modeling: The formative-reflective scheme

A new approach for the estimation and the validation of a structural equation model with a formative-reflective scheme is presented. The basis of the paper is a proposal for overcoming a potential deficiency of PLS path modeling. In the PLS approach the reflective scheme assumed for the endogenous latent variables (LVs) is inverted; moreover, the model errors are not explicitly taken into account for the estimation of the endogenous LVs. The proposed approach utilizes all the relevant information in the formative manifest variables (MVs) providing solutions which respect the causal structure of the model. The estimation procedure is based on the optimization of the redundancy criterion. The new approach, entitled redundancy analysis approach to path modeling (RA-PM) is compared with both traditional PLS Path Modeling and LISREL methodology, on the basis of real and simulated data.     

水力自动翻板闸门的瞬心轨迹及其对稳定性的影响

分析了连杆滚轮式水力自动翻板闸门的运动轨迹，并由此得出闸门动、静坐标系间的转换关系．结合翻板闸门的运转机理，探讨了闸门在运行过程中的瞬心轨迹线及其对闸门稳定性的影响．结果表明，通过优化闸门结构可调整“瞬心”的位置，保证闸门运转的稳定性．