Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003     

差动放大电路共模干扰抑制能力的研究

电磁流量计输出的流速信号非常微弱,且常叠加共模干扰,经信号调理电路放大后,会导致信噪比很低,甚至淹没有用信号．针对这问题提出了利用前置放大电路有效抑制共模干扰,对其进行定性、定量分析,给出实际可行的提高差动放大电路输入阻抗的设计,并进行分析、推导和对比计算,证明其可以很大限度抑制共模干扰,提高测量准确度．     

研究合金定向凝固组织的脉冲磁场设备的研制

介绍了脉冲电磁场发生设备的工作原理 ,设计等。并介绍了其如何与合金的定向凝固设备结合 ,以实现对合金的定向凝固组织在脉冲电磁场作用下的研究。     

国产60吨铝熔炉感应式电磁搅拌器的应用

介绍了60t炉底感应式电磁搅拌器的应用方案、工作原理、设备组成和安装形式,阐述了电磁搅拌器对熔融金属化学成分均匀性、温度均匀性以及金相组织的影响,分析了电磁搅拌的整体运行效果,并总结了电磁搅拌器的应用特点。     

曲轴斜油孔钻削头设计

曲轴的各轴颈在很高的比压下作高速旋转运动,使轴颈和轴承受到强烈磨擦.为保证曲轴轴承工作可靠,曲轴上必须设置可靠的润滑油道,将润滑油送到轴承磨擦表面上去.此油道属细长孔,且于轴线成一定的角度.本文介绍的是一种曲轴斜油孔钻削头的设计、结构和原理等,动用了两个电磁离合器,使得一根钻削头在工作时,另一根钻削头停止旋转,避免不必要的空转功率消耗;该设备用于生产后,实践证明,运行可靠,操作方便,满足了生产需要.     

国外武器装备电磁环境适应性试验与评价技术及能力发展综述

武器装备的电磁环境适应性已成为制约武器装备能打仗、打胜仗的一个重大问题;西方军事强国非常重视面向复杂电磁环境的武器装备试验与评价技术研究和能力建设,通过相关投资计划的长期持续投入,支持突破其中的关键技术、方法,以及构建相应的试验与评价设施能力;文章从标准规范和研制程序、技术方法、试验设施、科研和能力建设投资计划等几方面综述了国外武器装备复杂电磁环境适应性试验与评价技术和能力发展情况,并在此基础上,提出了对我国武器装备电磁环境适应性试验与评价能力的发展建议.     

低功耗数字控制超长波发射与接收系统

针对管道、矿山和水下等特殊环境中的信息通讯与信号传输等问题,根据超长波(ELF Electromagnetic Wave)具有传播损耗小且相位稳定等特点,给出了超长波发射与接收系统的设计原理与实现过程.发射系统采用单片机控制,输出的信号经发射天线产生23 Hz超长波,接收系统对采集到的信号进行带通滤波及放大处理.工程实验表明,所设计的系统在锂电池供电状态下,具有发射功耗低(连续工作时间大于72 h)、发射功率大(传播距离大于10 m)、且对接收的信号处理快速可靠(动态时滞小于5 s)等优点.     

含储能参与的日前市场价值公平分配机制

现有的节点边际电价机制中,由于传统发电商具有市场操控力,当储能独立参与市场出清时,各发电商采取策略性报价,打压并挤占储能电站的市场份额,阻碍了储能电站参与市场出清,间接导致市场出清总成本增大。为此,文中提出一种包含传统机组以及储能电站参与的市场竞争机制。首先,分析现有市场结算机制的弊端以及阻碍储能参与市场出清的原因;其次,建立含储能参与的市场出清模型,采用样本均值近似求解二阶段随机规划模型;接着,基于VCG结算机制,提出适应储能参与的日前市场价值分配机制;最后,提出解决激励相容而造成的系统收支不平衡问题的策略。文中采用修改后的IEEE30节点为例,证明该机制满足激励相容、收支平衡以及削弱传统发电商的市场操控力等性质,同时储能的参与将会减小系统出清总成本,降低市场价格剧烈波动的风险。     

Synergistic effects of micro-/nano-fillers on conductive and electromagnetic shielding properties of polypropylene nanocomposites

This study presents the synergistic effects of graphene nanosheets (GNSs) and carbon fibers (CFs) additions on the electrical and electromagnetic shielding properties of GNS/CF/polypropylene (PP) composites. These composites were fabricated by the melt blending of different ratios of GNSs and CFs (20:0, 15:5, 10:10, 5:15 and 0:20 wt/wt%) into a PP polymer matrix using a Brabender mixer. Besides, the chemical and crystalline structures and the thermal stability of the resultant GNS/CF/PP composites were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). FT-IR and XRD showed that with the addition of GNSs content, transmittances at 1373.4?cm^?1 and 1454.4?cm^?1 became smaller and the characteristic peak at 26.82° became stronger. TGA showed that the GNS/CF/PP composite can be used at high temperature below 456°C. Blending 10?wt% CFs and 10?wt% GNSs into the PP polymer resulted in excellent conductivity (0.397 S/cm), which indicated the occurrence of the critical percolation threshold phenomenon, and also reached the maximum electromagnetic shielding effectiveness (EMSE) of 20?dB at 1.28–2.00?GHz. Laminated with five layers of composites, its EMSE achieved 25–38?dB at 0.3–3.0?GHz, corresponding to blocking of 94.38–98.74% electromagnetic waves.     

Preparation of Porous Silver Nanowires-Melamine Formaldehyde Hybrid Composite Materials and Their Electromagnetic Shielding and Flame-Retardant Properties

Along with the booming development of communication technology and electronic equipment, higher requirements of flame-retardant and EMI shielding performances for electromagnetic interference (EMI) shielding materials are put forward. Herein, the ultralight and porous silver nanowires (AgNWs)-melamine formaldehyde (MF) hybrid composite with unique micro-/nanostructure is developed by a facile dip-coating method, which uses the AgNWs as 1D conductive coating and MF foam (MF foam) as 3D skeleton template. Benefiting from the unique porous micro-/nanostructure, the resultant hybrid composite displays low density, excellent EMI shielding performances, and superior flame-retardant property. The EMI shielding effectiveness (SE) and specific EMI SE (SSEt) of the hybrid composite in X-band (8.2–12.4 GHz) can be up to 77 dB and 26971.4 dB cm⁻² g⁻¹, respectively. At the same time, the hybrid composite also passes the vertical burning test and shows an increased LOI value of 40.6%. The combination of flame-retardant and EMI shielding performances for EMI shielding materials makes the AgNWs-MF hybrid composite great application potential in civil and military fields. This work provides a new guide for the design of multifunctional high-performance EMI shielding materials.