含氮化合物废气选择性催化氧化技术研究进展

通过对当前含氮化合物废气治理技术的对比分析,总结选择性催化氧化的相关技术优势。根据对含氮化合物的种类及来源分析,介绍氨气、腈类、胺类及其他含氮化合物的催化净化技术。重点总结催化剂的种类、研发进展和在实际使用中可能遇到的问题,同时展望含氮化合物废气选择性催化氧化技术的研发方向。     

Simulation of toxic gases and vapours removal by activated carbon filters

The system ASC carbon filter/cyanogen chloride was studied by simulation. Three filter configurations and several models, taking into account Langmuir adsorption and second-order reaction between the adsorbed toxic vapour and the active metal on the surface, were developed.The effects of axial dispersion, number of reaction units, film mass transfer units and intraparticle mass transfer resistance on the breakthrough time were studied.Simulation results show that a complex model should be used in order to predict with reasonable accuracy the protection imparted by these filters.     

State multiplicity in CSTR-separator-recycle polymerisation systems

This article continues earlier work (Comput. Chem. Eng. 24 (2000) 209) concerning the design and control of isothermal reactor-separator-recycle systems. The multiplicity behaviour of six reaction systems of increasing complexity, from one-reactant, first-order reaction to chain-growth polymerisation, is investigated. Below a critical value of the plant Damkohler number, Da<Da^cr, the only steady state involves infinite flow rates. Feasible steady states become possible if the critical value is exceeded, Da>Da^cr. For one-reaction systems, one stable steady state is born at a transcritical bifurcation. For consecutive-reaction systems, including polymerisation, a fold bifurcation can lead to two feasible steady states. Moreover, the transcritical bifurcation is destroyed when two reactants are involved. If the gel-effect is included, a maximum of four steady states are possible. When multiple steady states exist, the achievable conversion is constrained by the instability of the low-conversion branch. This has practical importance for polymerisation systems when the radicals’ quasi-steady state assumption is not valid or the gel effect is significant.     

Automated model generation for performance engineering of building automation networks

Large technical systems need to be designed both reliable and efficient. Specialized design tools offer therefore a simplified, abstract design and extend details autonomously in the background. Analytic and simulation based models could improve the quality by testing and dimensioning the design before implementation, but setting up the necessary models is time-consuming and expensive. Therefore many developers ask for analysis tools which are able to create their models from the available information in the design tools. This paper presents such an automated modeling approach basing on an existing design database at the example of a network analysis for building automation fieldbuses. The process of automated modeling is unfolded, and the potentials and limitations are discussed.     

火电机组运行优化系统的现状与展望

简单回顾了国内外在火电机组运行优化领域的研究历程，列举了目前国内外市场上针对火电机组的各种主流运行优化产品的功能特点和应用情况，分析了国外引进产品和国内自主研发产品在中国当前市场环境下各自的优势和劣势。介绍了当前运行优化系统在国内电站机组的应用现状，阐述了国内外运行优化系统在实际应用中存在的问题，并提出了相应的改进意见。对机组运行优化系统的未来发展进行了展望，指出机组运行优化系统将利用先进技术设备和信息平台，与电站管理紧密结合，在日益规范的市场中不断发展完善，为提高电站经济性发挥更大的作用。     

疏浚吹填工程推行项目经理责任承包制管理模式的探讨

阐述了传统管理模式的生存条件及其弊端,对疏浚吹填工程推行项目经理责任承包制管理模式进行了探讨.     

Mechanical properties of poly(ether-ether-ketone) for engineering applications

An outline of the characteristics of PEEK and the versatility of its compositional forms (micro and macro composites) are given to illustrate its wide potential for success in engineering applications. Although it is necessary to have particular tabulations of mechanical properties for engineering design, these are seldom available and consequently it is argued that an understanding of stiffness, toughness and strength properties are required to fully exploit available manufacturer's data and thus develop the full potential of PEEK and its composites. Stiffness characteristics are considered in terms of a modulus function which is dependent on time under load and temperature. In its composite forms, whether reinforced with short or continuous fibres, stiffness anistropy can be both considerable and complex, but some empirical ground-rules are apparent. For continuous fibre composites even in the form of complex lay-ups, it is also possible to attempt some stiffness prediction from certain pseudo-elastic constants. Toughness of PEEK and its composites is described in terms of both comparative and intrinsic properties. Instrumented falling weight impact data, particularly as a function of temperature enable some insight into ductile-brittle transitions for the unreinforced material, but crack initiation and crack propagation processes for the various fibre reinforced forms. Intrinsic toughness is described in terms of linear elastic fracture mechanics theory. Strength properties are described for static and dynamic loading configurations. In particular, PEEK and its composites are evaluated for increasing test severities for strength characteristics; stress concentration, loading form and test temperature are considered.     

Algorithm for finding all k nearest neighbors

A very simple algorithm for computing all k nearest neighbors in 2-D is presented. The method does not rely on complicated forms of tessellation, it only requires simple data binning for fast range searching. Its applications range from scattered data interpolation to reverse engineering.     

岩石工程力学特性参数测定装置设计

岩石工程力学特性参数测定装置实现了对试验载荷的恒速率加载 ,可对压模的吃深和试验载荷进行连续记录 ,记录的数据可实时显示及处理 ,且动态显示试验岩石的特性曲线 (试验载荷—轴向应变 )。该装置体积小、可移动性强 ,且能一机多用。文章详细阐述该装置机械结构、电路和系统软件的设计等