转移法色交换

将图Ｇ的着色由一种变为中一种，通常用Ｋｅｍｐｅ法以交换。但是，对于某些情况，用此法无效。针对这个问题，本文提出了一种转移法色交换，它适用于平面图着色，方法直观，清晰且有效。     

From hospital to municipal cogeneration systems: an Italian case study

A mixed integer linear programming model combined with a more traditional design by scenarios is proposed to optimize facilities size and operation mode of a municipal energy system involving significant civil centres and a hospital. Moving from the need of a new heat and power station for the local hospital due to the construction of new pavilions, the opportunity of involving other centres in the neighbourhood in a distributed cogeneration system is analysed, increasing system complexity step by step. Smaller cogeneration units tailored to hospital needs are rewarding ventures with relatively low risks but, in a country whose traditional power generation systems heavily rely on fossil fuels and where energy policy and market conditions can make it profitable to sell surplus power, district heating systems foster the installation of larger cogenerators and lead thereby to higher profits and to better performance as for primary energy savings and greenhouse gases emission reduction. Copyright © 2006 John Wiley & Sons, Ltd.     

压水堆堆芯换料设计优化的研究

讨论压水堆堆芯换料设计优化问题，并研制一套实用的换料优化软件包，可用于低泄漏、外－内和改进的外－内装料方案的优化。在低泄漏方案优化时，利用哈林原理将燃料组件布置与可燃毒物配置的优化问题脱耦成两步优化问题。先用线性规划方法进行无可燃毒物时燃料组件布置的优化，然后再用可变容差法寻找可燃毒物的优化布置。应用该软件对秦山核电厂首次难芯换料方案进行了优化，提出了可供参考的一些优化布置方案。     

Forming the optimal union of multiple databases

Many organizations, best illustrated by libraries, have access to hundreds of databases possessing varying degrees of complimentary and overlapping records. While users may receive positive marginal benefits from data duplications, all databases and their services cannot be supported because of resource limitations. This paper attempts to conceptualize the problem of database collection in an environment of multiple databases, with differential content and performance characteristics, diverse users, and limited resources. It defines the database collection problem as a constrained zero-one integer programming problem and solves for the optimal combination or union of databases. Several extensions are shown, where special conditions are imposed on the relationships between databases and/or their availability.     

轮式工程机械轮边减速器优化模型与方法

论述了重构轮式工程机械轮边减速器优化设计数学模型的必要性,给出了精确化的目标函数,全面化和准确化的设计变量、基于并行设计的约束条件;介绍了对优化解适用性评价的方法和手段。巧妙地解决了优化解中离散变量的圆整问题,提供了基于MATLAB的求解反渐开线函数的M文件。     

Optimal biocompatible solvent design for a two-stage extractive fermentation process with cell recycling

In this study, crisp and fuzzy multiple-goal optimization approaches are respectively introduced to design an optimal biocompatible solvent to a two-stage extractive fermentation with cell recycling for ethanol production. When designing a biocompatible solvent for the extractive fermentation process, many issues, such as extractive efficiency, conversion, amount of solvent utilized and so on, have to be considered. An interactive multiple-goal design procedure is introduced to determine a trade-off result in order to satisfy such contradicted goals. Both approaches could be iterated to solve the interactive multiple-goal design problem in order to yield a trade-off result. However, the crisp optimization design is a tedious task that requires the designer to provide various pairs of the upper bounds for the design problem to obtain the corresponding solution. The fuzzy optimization approach is able to be trade-off several goals simultaneously and to yield the overall satisfactory grade for the product/process design problem.     

Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions

BACKGROUND: Heterogeneous photocatalysis is influenced by a number of parameters involving synergistic effects; hence, an experimental strategy design that considers interactions between the main variables is needed. The response surface methodology was applied for the investigation of photodegradation of 20 mg L^?1 Orange II in aqueous solutions and for optimization of color removal efficiency. Preliminary studies were performed to identify the parameters to be selected for optimization. RESULTS: The input variables considered for experimental design were: solution initial pH, oxidizing agent (H₂O₂) initial concentration and UV‐A irradiation time. The multivariate experimental design allowed the development of a quadratic response surface model to be used for the prediction of color removal efficiency over the full range of the experimental region. Under the optimum conditions established in the region of experimentation (pH = 6.9, [H₂O₂]₀ = 183 mg L^?1 and t = 32 min), a 100% color removal efficiency was obtained in experiments. CONCLUSIONS: It was found that the variables considered have important effects on color removal efficiency. The results demonstrate that the use of experimental design strategy is indispensable for successful investigation and adequate modeling of the process because the interdependence of the reaction parameters cannot be neglected. Copyright © 2008 Society of Chemical Industry     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

Site occupations and ordering behaviour of O phase in Ti2AlNb—based intermetallics

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｏｒｔｈｏｒｈｏｍｂｉｃａｌｌｏｙｓａｒｅｏｆｇｒｅａｔｔｅｃｈ ｎｏｌｏｇ ｉｃａｌｉｎｔｅｒｅｓｔｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎｓｓｉｎｃｅｔｈｅｙｈａｖｅａｇｏｏｄｂａｌａｎｃｅａｍｏｎｇｓｔ