构皮滩水电站尾水隧洞特大断面软岩开挖支护

构皮滩水电站尾水隧洞软岩不良地质洞段占尾水隧洞全长的70%以上,确保软岩洞段的安全快速开挖是尾水隧洞施工的关键,尤其一次支护的强度对洞室稳定影响极大。为此,施工中根据软岩的地质特点及尾水隧洞开挖的断面尺寸,采取分层开挖和超前锚杆的施工方式和型钢拱架进行一次支护。根据监测结果,围岩变形很小,一次支护效果良好,表明构皮滩水电站尾水隧洞大断面软岩采取的开挖方式和一次支护方式是成功的。     

Direct atomic scale analysis of the distribution of Cu valence states in Cu/γ-Al2O3 catalysts

In this paper, the microstructure of a 1 wt.% Cu/γ-Al₂O₃ catalyst that was reduced in a 4% hydrogen/argon atmosphere at temperatures of 523, 773 and 1073 K, is studied by Z-contrast imaging and electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Results show that the copper species are well dispersed when the catalyst is reduced below 523 K. At 773 K, separated Cu(I) and Cu(0) species are found existing as ring-like and bulk-like particles. This appears to indicate that the copper has not been reduced to its metallic form due to the interaction between the copper oxide and the support. Large spherical particles having core-shell structures with Cu(I) in the shells and Cu(0) in the cores are generated when the catalyst is reduced at 1073 K. The formation of partially oxidized copper species upon reduction at 1073 K is attributed to the metallic copper interaction with the alumina support. This study also demonstrates that high-spatial resolution Z-contrast imaging and EELS performed simultaneously can provide unique information on the morphology and chemistry of metal species in supported metal catalysts.     

巷道最佳注浆加固时机的分析研究

对松散破碎以及软弱围岩巷道进行注浆加固巷道围岩时,注浆时机的选择对注浆效果具有很大的影响。有效地进行注浆加固的先决条件是浆液能够在围岩中均匀地流动渗透到一定范围,且注浆后能明显提高围岩强度和整体承载能力。在综合考虑围岩裂隙的发育程度、注浆加固体的强度、所需控制的围岩变形量及注浆工艺等因素的基础上,确定了最佳的注浆时机——滞后15d～25d。     

建筑设备监控系统及节能

介绍了建筑设备监控系统(楼宇自动化系统)基本构成和功能,从而指出其节能的内涵。     

环氧玻璃钢衬里在化工设备中的应用

本文叙述了非标准化工设备的环氧玻璃钢防腐衬里工艺、配方及使用考查结果．     

浅论太阳电池在通信工程中的应用

介绍了太阳电池应用的一般要求和太阳能供电系统的组成及运行，给出了工程设计个常用的太阳电池容量计算方法，并提出太阳能供电系统运行维护注意事项。     

土钉支护在深基坑开挖中的应用

深圳某银行办公楼的深基坑支护采用了土钉支护，不但保证了施工质量，而且缩短了工期，减少了投资，以此工程为例介绍了土钉支护的土力学参数计算、结构设计、施工方案、技术措施和取得的显著效果。     

内燃机车临时补水设备的设计与应用

针对内燃机车“途中缺水”故障 ,设计并安装临时补水设备 ,解决了电化区段临时补水的问题 ,满足了内燃机车“不停车、不停机”即可补水的要求。     

天生桥梯级水电站联合调度决策支持系统建设经验

决策支持系统是水库优化调度实用化的发展方向，对于提高水电站生产效益和水库调度管理水平具有重要意义。结合国电公司重点科技项目“天生桥梯级水电站联合调度决策支持系统”的开发，阐述了开发水电调度决策支持系统实现水库调度实用化的经验:正确反映用户需求、增强用户对系统的控制、用模拟仿真弥补优化调度的不足、用数据库技术扩展水库优化调度实用化功能。     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.