Prediction of the energy dissipation rate in ductile crack propagation

In this paper, energy dissipation rate D vs. Δa curves in ductile fracture are predicted using a ‘conversion’ between loads, load‐point displacements and crack lengths predicted by NLEFM and those found in real ELPL propagation. The NLEFM/ELPL link was recently discovered for the DCB testpiece, and we believe it applies to other cracked geometries. The predictions for D agree with experimental results. The model permits a crack tip toughness R(Δa) which rises from J_c and saturates out when (if) steady state propagation is reached after a transient stage in which all tunnelling, crack tip necking and shear lip formation is established. J_R is always greater than the crack tip R(Δa) and continues to rise even after R(Δa) levels off. The analysis is capable of predicting the usual D vs. Δa curves in the literature which have high initial values and fall monotonically to a plateau at large Δa. It also predicts that D curves for CCT testpieces should be higher than those for SENB/CT, as found in practice. The possibility that D curves at some intermediate Δa may dip to a minimum below the levelled‐off value at large Δa is predicted and confirmed by experiment. Recently reported D curves that have smaller initial D than the D‐values after extensive propagation can also be predicted. The testpiece geometry and crack tip R(Δa) conditions required to produce these different‐shaped D vs. Δa curves are established and confirmed by comparison with experiment. The energy dissipation rate D vs. Δa is not a transferable property as it depends on geometry. The material characteristic R(Δa) may be the ‘transferable property’ for scaling problems in ELPL fracture. How it can be deduced from D vs. Δa curves (and by implication, J_R vs. Δa curves) is established.     

喷煤未燃煤粉在高炉内行为的研究

在模拟攀钢高炉喷吹煤粉的生产条件下进行的未燃煤粉在高炉内的行为研究结果表明，在铁的直接还原、生铁渗碳、硅和钛还原、未燃煤粉和焦粉在炉渣中沉积、煤和焦炭反应性的各个试验中，未燃煤粉的反应性都大于焦炭，这些都是由于未燃煤粉的比表面积大，结构疏松所造成的。     

电弧炉采用石灰石单渣冶炼工艺的研究

采用优质石灰石取代质量差的白灰 ,进行了单渣电弧炉熔炼。结果表明 ,钢水成本降低 ,钢水质量提高 ,取得了良好的效果。     

VD炉设备安装要点及调试要求

VD炉是冶金行业冶炼过程中的一种钢液脱气设备。该设备工艺复杂，运行于高温、高压状态下，对设备本身质量和施工安装质量要求严格，是我国近年来推广的冶炼工艺的重要设备系统。     

脉动燃烧控制技术在隧道式淬火炉上的应用

为解决隧道式淬火炉炉温分布不均匀的问题，采用了高速调温烧嘴脉动燃烧控制技术。实践证明：脉动燃烧控制对象是带延迟的一阶惯性环节，因此对控制对象采用常规的PID控制策略完全可行。还阐述了高速调温烧嘴脉动燃烧控制技术运用于隧道式淬火炉的优越性和取得的显著效果。     

大冶诺兰达炉渣选矿的研究与实践

对影响炉渣选矿指标的主要工艺因素作了较详细的分析。并对炉渣处理的一些工艺措施做了改进，提出了用粗颗粒充气式浅槽浮选和炉渣冷却等工艺。结果表明：铜、铁、金、银得到进一步回收，达到了预期效果。     

炉台紧急吹扫故障判断方法

通过对炉台设备的简介及紧急吹扫的统计分析,提出了判断紧急吹扫故障的合理方法,提高了故障的准确判断率,减少了对生产的影响。     

提高中碳锰铁精炼电炉炉龄的实践

通过对精炼电炉炉体改造和出铁口材质、砖型的更新，解决了在中碳锰铁生产过程中炉眼易损问题，提高了炉龄，降低了生产成本。     

离心式高炉鼓风机扩压叶片断裂事故分析及处理

通过高炉鼓风机扩压叶片断裂事故，从化学分析、物理检验，结合使用情况对扩压叶片断裂原因进行了详细分析，并提出了改进措施。     

固体酸的酸性和结构对苯与乙烯烷基化的影响

在搅拌高压釜中,研究了纯磷钨酸、负载磷钨酸、工业Y-分子筛、工业β-分子筛和纳米β-分子筛5种固体酸催化剂进行苯与乙烯的液相烷基化反应的催化活性和反应选择性。实验结果表明,固体酸催化剂的烷基化反应活性高低主要取决于表面酸强度和酸量;乙苯的选择性主要取决于催化剂的孔道结构;乙基化的选择性则与催化剂的表面酸强度、酸性中心位置和孔道结构等因素有关。