钛铁矿流态化氧化机理研究

对低品位钛铁矿进行预氧化、预还原等预处理后可满足硫酸法生产钛白粉工艺所需高品位钛铁矿的要求。本试验采用流态化预氧化方法处理风化程度低、含硫较高的钛铁矿。结果表明 :流态化氧化可大幅度地降低钛铁矿中硫含量 ;钛铁矿流态化氧化的适宜温度为 :80 0～ 90 0℃ ,且在此温度范围内 ,随温度的升高 ,钛铁矿的氧化速度增加 ,在 90 0℃时 ,5 0min钛铁矿基本能完成氧化     

一些两段式煤气发生炉运行情况分析

两段式发生炉具有产生煤气热值较高，生产能力较大，稳定性较好等优点，目前在一些大中型企业运行良好。本文总结了一些两段炉操作运行情况，也指出了存在的一些问题，诸如煤气脱硫处理不当、停炉停产检修需调整以及应用计算机自动控制方面等问题有待于解决，最后提出一些建议。     

轧钢加热炉高效运行的新模式

介绍了综合应用新型无水冷技术和热管技术的轧钢加热炉高效运行的新模式，并结合首钢第一线材厂的实践，进一步阐明了该模式的实用性和给企业带来的良好效益。     

铜密闭鼓风炉生产效益的回归分析

通过铜密闭鼓风炉生产过程中关键指标的回归分析,寻找降低消耗、增加产出、提高经济效益的有效途径     

广钢3#高炉大修炉渣处理工艺探讨与分析

本文对处理高炉炉渣的图拉法工艺设计进行了总结，并对广钢3#高炉使用中出现的问题做了分析，生产实践表明，该工艺安全可靠，水渣质量好，而且有利于环境保护。     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。     

两流薄板坯连铸连轧作业时铸坯在加热炉内的运行规律

讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。分析了进入出坯段的铸坯的模式选择，进而确定铸坯进入平移段的时机。定义了加热炉综合进坯速度和加热炉平均出坯速度两个概念来讨论铸坯出坯的两种方案，并提出最小铸坯长度和最大加热炉综合进坯速度的计算公式。     

Prediction of the energy dissipation rate in ductile crack propagation

In this paper, energy dissipation rate D vs. Δa curves in ductile fracture are predicted using a ‘conversion’ between loads, load‐point displacements and crack lengths predicted by NLEFM and those found in real ELPL propagation. The NLEFM/ELPL link was recently discovered for the DCB testpiece, and we believe it applies to other cracked geometries. The predictions for D agree with experimental results. The model permits a crack tip toughness R(Δa) which rises from J_c and saturates out when (if) steady state propagation is reached after a transient stage in which all tunnelling, crack tip necking and shear lip formation is established. J_R is always greater than the crack tip R(Δa) and continues to rise even after R(Δa) levels off. The analysis is capable of predicting the usual D vs. Δa curves in the literature which have high initial values and fall monotonically to a plateau at large Δa. It also predicts that D curves for CCT testpieces should be higher than those for SENB/CT, as found in practice. The possibility that D curves at some intermediate Δa may dip to a minimum below the levelled‐off value at large Δa is predicted and confirmed by experiment. Recently reported D curves that have smaller initial D than the D‐values after extensive propagation can also be predicted. The testpiece geometry and crack tip R(Δa) conditions required to produce these different‐shaped D vs. Δa curves are established and confirmed by comparison with experiment. The energy dissipation rate D vs. Δa is not a transferable property as it depends on geometry. The material characteristic R(Δa) may be the ‘transferable property’ for scaling problems in ELPL fracture. How it can be deduced from D vs. Δa curves (and by implication, J_R vs. Δa curves) is established.     

喷煤未燃煤粉在高炉内行为的研究

在模拟攀钢高炉喷吹煤粉的生产条件下进行的未燃煤粉在高炉内的行为研究结果表明，在铁的直接还原、生铁渗碳、硅和钛还原、未燃煤粉和焦粉在炉渣中沉积、煤和焦炭反应性的各个试验中，未燃煤粉的反应性都大于焦炭，这些都是由于未燃煤粉的比表面积大，结构疏松所造成的。     

电弧炉采用石灰石单渣冶炼工艺的研究

采用优质石灰石取代质量差的白灰 ,进行了单渣电弧炉熔炼。结果表明 ,钢水成本降低 ,钢水质量提高 ,取得了良好的效果。