铸造铅合金曲面工件X射线检测工艺研究

针对铸造铅合金曲面工件的内部质量检测问题，通过研究射线检测工艺，优化射线检测参数和研制孔型像质计，实现了铅铸件的射线检测和检测过程质量控制。结果表明可检出工件内部小至Ф3mm的缺陷，且缺陷主要为疏松和渣孔。     

基于平方位置误差下限的优化功率分配方案

在无线传感网络中,节点定位是基于位置的应用基本要求。然而,现多数文献仅关注定位精度,而忽略了能量消耗对定位精度的影响。为此,针对基于接收信号强度RSSI(Received Signal Strength Indicator)定位方案,提出基于平方位置误差下限SPEB(Squared Position Error Bound)的优化功率分配SPEB-OPA(SPEB-Based Optimal Power Allocation)方案,目的在于最小化能量消耗。在SPEB-OPA算法中,将SPEB作为评定定位精度的参数,并推导出SPEB表达式,然后建立优化功率分配的目标函数,并考虑到锚节点位置存在误差。仿真结果表明,提出的SPEB-OPA方案极大地减少了功率消耗。当误差门限T=8时,SPEB-OPA方案的功率消耗比统一功率分配UPA(Uniform Power allocation)方案减少至50%。     

深度信念网络在故障指示器检测中的应用

电子产品在生产过程中需进行产品检测,以故障指示器的检测为例,结合深度信念网络(DBN)技术实现了自动检测.深度信念网络由于其具有无监督预训练的优势,将其应用于实际系统,对现场的故障指示器视频图像的动作状态进行了分类实验.实验结果表明:深度信念网络分类算法相比于支持向量机(SVM)分类算法和BP分类算法有明显的优势,正确识别率达到了100％.该算法在产品检验的应用中满足生产测试的要求,且降低了人工测试的劳动强度,缓解了视觉疲劳问题.     

System Project Failure: The Heuristics of Risk

Abstract

System project failures are a well-known part of systems development; however, all the potential risks of planning and executing a project effort are not This article offers heuristic guidelines to help IS managers assess these inherent risk factors before initiating and while executing a project. Case examples illustrate how a particular risk factor can result in a failed systems development effort.     

A Recommendation System Keeping Both Precision and Recall by Extraction of Uninteresting Information

A recommendation system which recommends interesting information to the target user must guarantee high precision and recall. However, there is trade-off between precision and recall. In this paper, we propose a web page recommendation method balancing both of them by take advantage of uninteresting information. The proposed method extracts the interest and uninterest indicators from not only historical interesting web pages but also uninteresting ones in a target genre. The historical interesting and uninteresting information is derived based on the browsing time and bookmarking. The proposed method can keep precision and recall by excluding the uninteresting information from the recommended ones based on the interest and uninterest indicators. The experimental result proved that the proposed method can improve the precision and recall than an existing method.     

Development of a new indicator of pollutant loads and its application to the Chesapeake Bay watershed

Pollutant load reductions are often required to restore aquatic ecosystems experiencing eutrophication. Loads can be estimated using watershed models or data from monitoring stations, however data availability can limit the timeliness or comprehensiveness of the load estimates. We developed an approach to address this challenge that used watershed model results to estimate the proportion of annual nonpoint source nitrogen (N), phosphorus (P) and sediment (Sed) loads derived from unmonitored catchments. This proportion was multiplied by the nonpoint portion of United States Geological Survey (USGS) estimated annual river loads to account for annual variation in hydrologic conditions. Total loads were calculated as the sum of measured river loads, reported point sources from unmonitored areas and the estimated nonpoint source loads from unmonitored catchments. We applied this approach to the Chesapeake Bay because of its socio‐economic and ecological importance. Median watershed loads for N, P and Sed were 140, 6.4 and 3030 Mg year^?1, respectively (1990–2004). Nonpoint source loads from the monitored areas constituted the greatest source of N, P and Sed (55, 47 and 74% respectively) to the Bay. The high N, P and Sed yield rates (7.3, 0.38 and 99 kg ha^?1 year^?1, respectively) from nonpoint loads originating from unmonitored areas near the Bay resulted in 25, 32 and 26% (N, P and Sed, respectively) of the Bay's total loads (excluding direct atmospheric deposition, shoreline erosion and oceanic inputs). Disproportionately high loads of P and Seds were associated with years that experienced elevated discharge whereas N loads were directly related to discharge. Error estimates indicated that our methods were most reliable for N (±6%) but reasonable for P (±22%) and provide an effective technique for the timely estimation of pollutant loads from watersheds with unmonitored catchments. Management strategies that decrease N deposition and reduce runoff to control P and Sed transport will effectively reduce pollutant loads. Published in 2010 by John Wiley & Sons, Ltd.     

浅谈利用现有条件对1200型智能定位器修校

本文就1200型智能定位器使用中出现的一些问题进行分析,利用现有条件总结出一套完整的修校方法并进行应用,收到了良好的效果,降低了成本,缩短了设备的修复时间。     

利用曲率信息的图像分割改进模型

首先从理论上分析无须重新初始化的水平集方法的主动轮廓图像分割模型,该模型对一些具有不光滑尖角的图像进行分割时,捕捉这些尖角往往不精确甚至失败;然后对利用边缘检测函数的曲率信息识别出凸尖角并进行分割的方法进行研究,由于此方法没有考虑凹尖角的情形,故对含凹尖角的图像分割效果不理想。为解决该问题,提出利用图像的曲率信息识别出凹尖角,再将其与利用边缘检测函数曲率信息识别凸尖角的方法相结合,进一步修正边缘检测函数,达到准确捕捉物体的凸尖角和凹尖角的目的,保证了分割的准确性。数值实验表明,该方法的分割效果较好。     

优化的BP网络在抽油井故障诊断中的应用研究

抽油井故障诊断系统是油井系统产量的关键,为了更好更快地对当前油井系统进行诊断以保证石油的产量,人们利用各种各样的技术来完成这一目标。BP神经网络技术就是新兴的油井故障诊断手段之一,但是由于其容易陷于局部最优解、收敛速度慢以及泛化能力差等缺点,运用融入免疫算法浓度概念的遗传算法对BP神经网络进行优化,并将优化后的BP神经网络算法应用于抽油机现场的故障诊断过程中,结果显示优化后的BP算法有更高的诊断率,更快的运行速度,因而优化后的BP算法的寻找全局最优点的能力更强,收敛速度更快。     

基于ZigBee技术的铁路站场集装箱追踪定位的研究

为了在基于ZigBee技术的铁路站场无线网络中实现对安装在集装箱上的无线节点的定位,研究设计一种采用接收信号强度指示（RSSI）值来进行无线节点位置的定位：采用一个未知节点向周围存在的ROUTER参考节点发送并接收确认的数据采集机制．通过对3个最近ROUTER的参考节点进行RSSI值采集与处理,从而实现对目标节点的定位。通过实验,验证了该数据采集和位置估算定位方法的有效性。