Compounding and injection molding of polybutene‐1/polypropylene blends

The effect of shear‐controlled orientation injection molding (SCORIM) was investigated for polybutene‐1/polypropylene blends. This article reports on the methods and processing conditions used for blending and injection molding. The properties of SCORIM moldings are compared with those of conventional moldings. SCORIM is based on the application of specific macroscopic shears to a solidifying melt. The multiple shear action enhances molecular alignment. The moldings were investigated with mechanical tests, differential scanning calorimetry studies, and polarized light microscopy. The application of SCORIM improved Young's modulus and the ultimate tensile strength. The gain in stiffness was greater for higher polybutene‐1 content blends. A drastic decrease in the strain at break and toughness was observed in SCORIM moldings. The enhanced molecular orientation of SCORIM moldings resulted in a featureless appearance of the morphology. Interfacial features due to segregation were visible in the micrographs of SCORIM moldings. Both conventional and SCORIM moldings exhibited form I′ in polybutene‐1. This article explains the relationship between the mechanical properties and micromorphologies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 806–813, 2003     

基于启发式搜索与预标注的中文CCG句法分析

针对中文组合范畴语法(CCG)分析困难的特点,研究如何将两种彼此相互独立的技术共同应用在中文CCG句法分析上。首先使用预标注算法,使用对数线性模型通过去除那些概率较低的词汇范畴来对句子的潜在分析空间进行剪枝。然后应用启发式搜索算法进一步加速分析过程。最后从时间效率和分析精度两个维度对所使用的方法进行验证。实验表明,基于启发式搜索与预标注的句法分析算法可以显著地提高分析效率与分析精度。     

纳米铜锰复合氧化物固相反应法的制备与表征

以乙酸铜、乙酸锰与草酸为原料,采用固相化学反应法制备了纳米铜锰复合氧化物前驱物,利用均匀设计考察了微波功率与加热时间、热分解温度及时间对产物粒径的影响。研究表明热分解温度对产品粒径的影响最大。最小粒径产物的制备条件是：微波功率540 W,微波加热时间15 min;热分解温度370℃,热分解时间2 h。XRD和TEM分析结果表明,此产品主要物相为Cu1.5Mn1.5O4,结构属立方晶系,空间群为Fd3m,平均粒径16.9-19.0 nm。应用TG-DTG和DSC技术研究了纳米铜锰复合氧化物的热分解过程以及热分解动力学,采用Ozawa积分法和Coats-Redfern积分法得前驱体的热分解机理函数均为G（α）=[-ln（1-α）]^2/3。     

Surface‐initiated atom transfer radical polymerization from Mg(OH)2 nanoparticles to prepare the well‐defined polymer‐Mg(OH)2 nanocomposites

Well‐defined polymer‐Mg(OH)₂ nanocomposites were prepared by atom transfer radical polymerization (ATRP). The ATRP initiators were covalently attached to the Mg(OH)₂ by esterification of 2‐chloropropionyl chloride with hydroxyl group. The amount of polymer grafted from Mg(OH)₂ can be controlled using a different catalyst system and adding a small amount of polar solvent. The well‐defined diblock copolymer, consisting of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) were synthesized. The products were characterized by nuclear magnetic resonance, Fourier transform infrared, differential scanning calorimetry, and thermal gravimetric analysis. The morphologies of PS/PMMA and PS/PMMA/Mg(OH)₂‐g‐PS‐b‐PMMA blends are compared by using a scanning electron microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3680–3687, 2007     

4-甲氧基苯乙腈的又一种合成法

以4-羟基苯乙酰胺为原料,经甲基化和脱水两步反应合成了4-甲氧基苯乙腈,总收率76.5%。     

Structure of Atomic and Molecular Adsorbates on Low-Miller-Index ZnO Surfaces Using X-ray Absorption Spectroscopy

We review our X-ray absorption spectroscopy studies of adsorbate geometries on the O-terminated (000 ) and Zn-terminated (0001) basel faces, as well as the non-polar (10 0) prism face of ZnO. Studies employing near-edge X-ray absorption fine-structure (NEXAFS) and surface X-ray absorption fine-structure (SEXAFS) are included.     

Effects of an organic phosphorus nucleating agent on crystallization behaviors and mechanical properties of poly(propylene)

The effects of an organic phosphorus nucleating agent on the crystallization behavior and mechanical properties of poly(propylene) were investigated. As the concentration of nucleating agent increased from 0 to 0.8%, the tensile and flexural strengths of the nucleated poly(propylene) resin increased by 15%, the flexural modulus increased by 35%, the crystallization peak temperature increased by 10°C, and the nucleation density (calculated with the nonlinear Voltrra integral equation) increased by 10⁶ times. Mechanical properties increased with nucleation density. Linear equations between the mechanical properties and the logarithmic nucleation density were revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 297–301, 2003     

重钙装置改产DAP的工程实践

介绍瓮福重钙装置采用混合工艺改产 DAP的技术改造及试车概况、试车中出现的问题及解决措施。     

TiB2的SHS合成过程理论分析

在ＴｉＢ２陶瓷材料的自蔓延高温合成（简称ＳＨＳ）过程中，通过改变原料的起始温度，稀释剂的含量和原始颗粒的尺寸等都可以调节合成过程的绝热温度，产物中熔融相的含量，以及燃烧波蔓延的速度，人而最终影响合成产物的结构和性质。本文对上述各种关系进行了理论计算和分析，其结果对实际合成与制备过程将有着重要的指导作用。     

时间Petri网与CAGA算法相结合的并行测试研究

在并行测试的研究中对于任务的测试次序一直是个研究重点及难题。用时间Petri网建立关于并行测试系统的模型,并首次用元胞遗传算法(CAGA)对模型中的变迁序列进行搜索,快速得到最好的测试序列。通过仿真结果表明,该算法展示了很好的收敛效果,并且与已有的研究成果相比更具优势。