碳纤维增强聚醚醚酮的非等温结晶行为与力学性能

利用聚酰亚胺(PI)作为碳纤维(CF)界面改性剂,制备了界面改性碳纤维增强聚醚醚酮(MCF/PEEK)复合材料。采用差示扫描量热仪(DSC)讨论了CF及其界面改性对PEEK非等温结晶行为的影响机制与作用规律,并基于莫志深法研究了MCF/PEEK的非等温结晶动力学;借助DSC和小角X射线散射仪(SAXS)表征不同降温速率下PEEK基体的结晶结构,采用万能试验机评价了MCF/PEEK的力学性能。结果发现:CF对PEEK的结晶有较为明显的异相成核促进作用,经过PI界面改性之后成核作用有所下降,但结晶行为仍较纯PEEK更容易发生,整体结晶速率更快;随冷却速率的增大,基体结晶度、片晶厚度与长周期均减小,MCF/PEEK的拉伸强度与模量也显著减小,层间断裂韧性提高。     

浅谈海南影视动画产业发展中的政府作为

影视动画产业是当今社会的朝阳产业,是传统经济发展和延伸的一种新方式,政府对影视动画产业十分重视.而影视文化产业具有浓厚文化色彩和广阔的自由发展空间,有利于影视动画的进一步发展与建设.影视动画产业发展对象可以是影视基地,也可以是影视剧本,产业发展对象丰富,所以此产业的发展前景非常明朗,并且还具有高度的研究价值.     

油水乳化液流变性研究进展

综述了油水乳化液流变性研究进展，介绍了目前国内外乳化液流变性的研究情况、乳化液的流变模式及乳化液流变性的评价方法。乳化液的剪切应力-剪切速率关系明显受油滴尺寸的影响，在含油量一定时，表观黏度随油滴尺寸的减小而增加。绝大多数乳化液在低剪切速度下(低于50s^-1)，呈现剪切变稀行为；在剪切速率超过1000s^-1时呈现牛顿行为。高含水原油的视黏度是温度、含水率以及剪切速率的函数。介绍了乳化液的3种流变模式，并给出了流变性评价方法实例。提出了油水乳化液流变性研究的发展方向。     

聚甲醛在新型陶瓷注射成型催化脱脂工艺中的应用

利用聚甲醛对酸性气氛敏感易分解的特性，将其作为主要粘结剂应用于陶瓷注射成型技术中，并采用了新型的催化脱脂技术，使得脱脂速度有了很大提高，实验样品主要粘结剂的脱除量在10h内即达到90％以上，记录了该过程中样品失重的情况，分析了脱脂阶段不同特征及其原因，指出催化脱脂过程速度的控制因素是气态催化剂和气体产物扩散过程，实验观察了脱脂过程不同时刻样品外围与中心区域的微观形貌，证明了脱脂过程由外围逐渐向内部扩散，对物料流变性能的考察表明物料为假塑性，有良好的流动充模性。     

Relationships Between the Crystal Structures and the Multiple Melting Behaviors of Poly(ethylene 2,6‐naphthalate)

Summary: Poly(ethylene 2,6‐naphthalate) (PEN) can crystallize either from the glassy state or from the melt state. When crystallized from the glassy state, the sample was quenched from the melt in liquid nitrogen and then annealed at certain crystallization temperatures. When crystallized from the melt state, the sample was cooled to a preset temperature from the melt and then annealed for a certain time. The crystal modifications, morphologies and melting behaviors of PEN were investigated by means of wide‐angle X‐ray diffraction (WAXD), polarized optical microscopy (POM), small‐angle light scattering (SALS) and differential scanning calorimetry (DSC). The results show that an α crystal modification of PEN was obtained when PEN crystallized from the glassy state, whilst a β crystal modification was obtained when PEN crystallized from the melt state at a higher temperature. An hedritic morphology of PEN crystal was obtained with only one melting peak observed in DSC curves when PEN was crystallized at a higher temperature from either the glassy state or the melt state. The α crystal modification could also be obtained when PEN was crystallized at a lower temperature from the melt. Spherulitic or banded spherulitic morphologies of PEN crystals, exhibiting multiple melting peaks in DSC curves, were observed when PEN was crystallized at a lower temperature. The multiple melting behaviors of PEN crystals may be associated with spherulitic structures composed of lamellae of varying thickness.

WAXD patterns of PEN isothermally crystallized from different states.     

复合材料弹道冲击性能研究进展

本文总结了近年来复合材料弹道冲击研究的进展,着重从纤维集合体的结构对弹道冲击损伤机理的影响、弹道冲击的分析模型及数值模拟做了概述,总结了人们为提高复合材料弹道冲击性能所做的努力,最后指出了几个尚需深入解决的问题.     

Orientation ofMicroplitis croceipes (Hymenoptera: Braconidae) to green leaf volatiles: Dose-response curves

FemaleMicroplitis croceipes wasps were tested in a wind tunnel for their ability to orient to various concentrations of eight different green leaf volatile (GLV) substances [hexanal, (E)-2-hexenal, (E)-2-hexen-1-ol, (Z)-3-hexen-1-ol, (E)-2-hexenyl acetate, (Z)-3-hexenyl acetate, (Z)-3-hexenyl propionate, and (Z)-3-hexenyl butyrate]. Overall, the esters elicited the greatest percentage of successful orientation flights, the alcohols elicited an intermediate response, and the aldehydes elicited a low response. The semilog dose-response curves were generally hill-shaped with high responses at medium release rates and low responses at high or low release rates. For the aldehydes, positive responses occurred at all GLV release rates between 0.01 and 100 nl/min. For some alcohols and esters, positive responses occurred at release rates as low as 1 pl/min and as high as 1μl/min. These data show thatM. croceipes wasps are strongly attracted to GLVs and are capable of orienting to GLV concentrations that would occur in nature when a caterpillar feeds on a green leaf. Hence, in nature, GLVs may be important clues, enablingM. croceipes to locate their hosts.     

A Unified Model for the Mixing of Non‐Newtonian Fluids in the Laminar,Transition, and Turbulent Region

Summary: Non‐Newtonian fluid behavior has significant influence on quantities in chemical engineering like power input, mixing time, heat transfer etc. In the laminar flow region, the concept of effective viscosity by Metzner and Otto is well established. In the transition region between laminar and turbulent flow, the existing concepts use three and even more empirical parameters to determine the specific power input. Here, a unified and general but simple approach is introduced to calculate the power input for shear thinning fluids over the whole flow region using just one empirical parameter. The Metzner‐Otto relation is obtained as a limiting case for the laminar region. The empirical parameter of the new approach is related to the Metzner‐Otto constant. The concept is validated for eight different stirrer systems. Mixing time and maximum shear rate and heat transfer can also be calculated using this approach. The new concept presented should also be applicable for other apparatuses, e.g., static mixers.

Comparison of experimental data and a curve calculated according to the new method (solid line).     

Synthesis,characterization, and antitumor activity of poly(maleic anhydride‐co‐vinyl acetate‐co‐acrylic acid)

The ternary copolymerization of maleic anhydride (MA), vinyl acetate (VA), and acrylic acid (AA) [P(MA‐co‐VA‐co‐AA)], which is considered to be an acceptor–donor–acceptor system, was carried out in 1,4‐dioxane with benzoyl peroxide as an initiator at 70°C under a nitrogen atmosphere. Constants of complex formation for the monomer systems in the study were determined by UV–visible (hydrogen‐bonding complex) and ¹H‐NMR (charge transfer complex) methods, respectively. The results show that polymerization of the P(MA‐co‐VA‐co‐AA) system proceeds by an alternating terpolymerization mechanism. It is shown that the synthesized copolymers have typical polyelectrolyte behavior, ability for reversible hydrolysis–anhydrization reactions, and semicrystalline structures. In these cases, including radical polymerization, and formation of semicrystalline structures, the hydrogen‐bonding effect plays a significant role. The in vitro cytotoxicities of the synthesized terpolymer and alternating copolymer were evaluated using Raji cells (human Burkitt lymphoma cell line). The antitumor activities of prepared anion‐active copolymers were studied using methyl–thiazol–tetrazolium colorimetric assay and 50% of the cytotoxic dose of each copolymer and terpolymer were calculated. Hydrolyzed P(MA‐co‐VA‐co‐AA) and P(MA‐alt‐AA) copolymers have sufficiently high antitumor activity, which depends on the amount of hydrogen‐bonding carboxylic groups and their regular distribution in the side chain of functional macromolecules. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3425–3432, 2006     

The tribological behavior of micrometer and nanometer TiO2 particle‐filled poly(phthalazine ether sulfone ketone) composites

Micrometer and nanometer TiO₂ particle‐filled poly(phthalazine ether sulfone ketone) (PPESK) composites with various filler volume fractions from 0.5 to 7.5 vol % were prepared by heating compression molding. The friction and wear behaviors of the PPESK composites were evaluated using the block‐on‐ring test rig by sliding PPESK‐based composite blocks against a mild carbon steel ring under dry friction conditions. The wear debris and the worn surfaces of the PPESK composites filled with micrometer and nanometer TiO₂ particles were investigated by using a scanning electron microscope (SEM), while the structures of PPESK composites and wear debris were analyzed with IR spectra. Experimental results show that antiwear properties of the PPESK composites can be improved greatly by filling nanometer TiO₂ particles, and the friction coefficient decreases when the filler volume fraction is below 2.5%, but when the filler volume fraction is above 2.5% the friction coefficient increases gradually with increasing filler volume fraction. In the case of micrometer TiO₂ filler, wear rates increase with increasing filler volume fractions under identical test conditions, and the friction coefficients are less sensitive to the filler volume fraction. It was also found that the wear mechanism of micrometer TiO₂ particle‐filled PPESK is mainly severe adhesion and abrasive wear, while that of nanometer TiO₂ particle‐filled PPESK is mainly slight abrasive wear. In the former case, there are no transfer film formed on the surface of the counterpart steel, and wear debris are in the form of long and large ribbon. While in the latter case, the wear debris was granule and their size was about 10 μm. In case of 1 vol % nanometer TiO₂ particle‐filled PPESK composites, the transfer film was fairly thinner and smoother, and the transfer film provided better coverage on the surface of steel ring, while that of 7.5 vol % was thicker and discrete. These account for the different friction and wear behavior of micrometer and nanometer TiO₂ particle‐filled PPESK composite. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 906–914, 2004