基于支持向量机的岩爆识别模型

岩爆的发生受多种因素的影响,这些因素关系错综复杂,以不同的特征和组合对岩爆产生综合影响,为科学、充分地利用现有的有限工程资料,本文从地下洞室围岩最大切向应力、岩石的单轴抗压强度和抗拉强度以及岩石冲击倾向指数四个主要因素出发,提出了基于支持向量机的岩爆识别模型,较好地解决小样本、非线性、高维数、局部极小点等的实际问题。     

健康长江评价指标体系与标准研究

科学的指标体系和标准是评价河流健康状况的技术依据。根据科学性、代表性、创新性等原则，运用主成分分析法和聚类分析法．构建了健康长江评价指标体系，包括河岸稳定性、河床稳定性等19个定量指标和水系连通性、河岸栖息地状况和珍稀水生动物存活状况3个定性指标；给出了相应指标的量化评价方法，并通过国内外相关研究成果的综合分析．提出了健康长江的评价标准及分类标准，为维持河流健康理论发展提供了新方法。     

稀疏脉冲反演技术在井间地震反演中的应用

将传统的波阻抗反演技术应用于井间地震资料反演时，存在着方法适用的域和资料的域不同，井间地震资料的频带比地震资料的频带宽以及频率比地震资料频率高，多对井间地震资料拼接等问题。为此，在胜利油田K71井区，探讨了利用传统波阻抗反演技术（稀疏脉冲反演）进行井间地震资料波阻抗反演的一些技术问题，并用利11对井间地震资料进行了波阻抗反演，获得了较好的反演结果，在井间地震资料反演中，采用匹配滤波方的井间地震资料转换到时间域；利用高分辨率地面三维地震资料，采用统计方法提取反演子波，子波的波形和相位较稳定，频带宽；对测井资料进行标准化处理，在反演的波阻抗剖面上砂体的空间展布形态清晰，对储层的描述更精细；利用时深转换模型，将时间域的波阻抗剖面转换到深度域，直接与测井资料进行对比分析，对储层的描述更直观可靠。     

Solids Extraction of Cod Frame and Effects on Ultrafiltration of the Aqueous Extract

Grinding, pH adjustment, heat treatment and centrifugation were studied to recover solids from ground cod frames and to apply ultrafiltration (UF) to the resulting aqueous phase. Early heat treatment (90°C/20 min) dissolved collagen into aqueous phase resulting in a very low UF flux. A pH adjustment to 4.5 after grinding (～0.32 cm die), with no heat resulted in efficient separation after centrifuging. UF of the aqueous phase showed an increase in initial flux (23 L/hr m²). However, when the same aqueous material was heated and then centrifuged (1–2% solids removed), UF flux was further increased to 46 L/hr m²and this process gave highest solids recovery (90%).     

Sunflower Head Residue Pectin Extraction as Affected by Physical Conditions

Effects of extraction pH, temperature, and time on yield and quality of pectin from sunflower heads (Interstate cultivar) were investigated. The low-methoxyl pectin was extracted, using 0.75% sodium hexametaphosphate at pH 3, 4, and 5 and at 75, 85, and 95°for 20, 40, and 60 min, respectively. Yield, molecular mass, and firmness of jellies of the pectins were determined. Three-way statistical analysis on yield, molecular mass and gel firmness showed strong interactions among pH, temperature and time. Highest yields were obtained at pH 5, 95°for 20 min and pH 4, 85°for 40 min. Pectin extracted for 40 min at pH 3 and 4 and at 85°and 75°C, respectively, had the highest molecular mass. Gel firmness of sunflower pectin prepared at pH 5.4 was higher than that of a commercial citrus pectin.     

膜萃取器设计及应用研究进展

简要阐述了膜萃取的特点和基本类型;重点介绍了轴对称、纤维、片状等３种膜器的设计原理、特征以及膜过程设计．总结了膜萃取技术在金属离子分离、旋光化合物的分离、发酵萃取、医药萃取等方面的应用现状和最新进展;展望了膜萃取技术的发展趋势。     

超临界CO2萃取技术及成套装备

介绍了超临界CO2 萃取这一新兴分离技术在工业化装置的工艺流程、化工过程、设备及过程控制系统等方面的内容     

Modeling of a power electronic converter for EMC in the conduction emission frequency band

With the advancement of high‐frequency switching devices, electromagnetic interferences (EMI) have become problems in power electronic converter designs. It is necessary for an electromagnetic compatibility (EMC) design to prospect and consider its possible EMI levels. This paper describes how to compute effects from a power converter to an object point to reduce conduction EMI noises effectively by an appropriate design. Modeling techniques for converter elements are discussed for a model in the conduction emission frequency band by the parameter tuning method and for line constants by an analytical derivation. Then a derived model is simulated for harmonic distributions of loop currents and their magnetic fields. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 44–50, 2002: DOI 10.1002/eej.1145     

Rapid analysis of polymer homologues and additives with SFE/SFC-MS coupling

A rapid and easy analysis method for polymers is presented. The method involves sample preparation by SFE, separation of the extracted compounds by SFC and simultaneous quantitative detection by FID, as well as identification of unknowns by MS. The applications illustrate how structural research work and routine polymer analysis can be done with this time saving method.     

Integrated Automation System for Rare Earth Countercurrent Extraction Process

Lower automation level in industrial rare-earth extraction processes results in high production cost, inconsistent product quality and great consumption of resources in China. An integrated automation system for extraction process of rare earth is proposed to realize optimal product indices, such as product purity, recycle rate and output. The optimal control strategy for output component, structure and function of the two-gradcd integrated automation system composed of the process management grade and the process control grade were discussed. This system is successfully applied to a HAB yttrium extraction production process and was found to provide optimal control, optimal operation, ontimal management and remarkable benefits.