Introducing autonomous aerial robots in industrial manufacturing

Although ground robots have been successfully used for many years in manufacturing, the capability of aerial robots to agilely navigate in the often sparse and static upper part of factories makes them suitable for performing tasks of interest in many industrial sectors. This paper presents the design, development, and validation of a fully autonomous aerial robotic system for manufacturing industries. It includes modules for accurate pose estimation without using a Global Navigation Satellite System (GNSS), autonomous navigation, radio-based localization, and obstacle avoidance, among others, providing a fully onboard solution capable of autonomously performing complex tasks in dynamic indoor environments in which all necessary sensors, electronics, and processing are on the robot. It was developed to fulfill two use cases relevant in many industries: light object logistics and missing tool search. The presented robotic system, functionalities, and use cases have been extensively validated with Technology Readiness Level 7 (TRL-7) in the Centro Bahía de Cádiz (CBC) Airbus D&S factory in fully working conditions.     

数字证书在环保行业的应用分析

目前国家环保部正在开展的国家环境信息与统计能力建设项目中,采用数字证书为业务系统提供强身份认证服务。详细论述了数字证书在环保部的应用模式,指出了今后的工作方向,同时也指出了现有应用模式的不足之处。     

Robust stability and stabilization of discrete singular systems with interval time-varying delay and linear fractional uncertainty

The robust stability and robust stabilization problems for discrete singular systems with interval time-varying delay and linear fractional uncertainty are discussed. A new delay-dependent criterion is established for the nominal discrete singular delay systems to be regular, causal and stable by employing the linear matrix inequality (LMI) approach. It is shown that the newly proposed criterion can provide less conservative results than some existing ones. Then, with this criterion, the problems of robust stability and robust stabilization for uncertain discrete singular delay systems are solved, and the delay-dependent LMI conditions are obtained. Finally, numerical examples are given to illustrate the e?ectiveness of the proposed approach.     

Handling multiple objectives with biogeography-based optimization

Biogeography-based optimization (BBO) is a new evolutionary optimization method inspired by biogeography. In this paper, BBO is extended to a multi-objective optimization, and a biogeography-based multi-objective optimization (BBMO) is introduced, which uses the cluster attribute of islands to naturally decompose the problem. The proposed algorithm makes use of nondominated sorting approach to improve the convergence ability effciently. It also combines the crowding distance to guarantee the diversity of Pareto optimal solutions. We compare the BBMO with two representative state-of-the-art evolutionary multi-objective optimization methods, non-dominated sorting genetic algorithm-II (NSGA-II) and archive-based micro genetic algorithm (AMGA) in terms of three metrics. Simulation results indicate that in most cases, the proposed BBMO is able to find much better spread of solutions and converge faster to true Pareto optimal fronts than NSGA-II and AMGA do.     

Design of robotic visual servo control based on neural network and genetic algorithm

A new visual servo control scheme for a robotic manipulator is presented in this paper, where a back propagation (BP) neural network is used to make a direct transition from image feature to joint angles without requiring robot kinematics and camera calibration. To speed up the convergence and avoid local minimum of the neural network, this paper uses a genetic algorithm to find the optimal initial weights and thresholds and then uses the BP algorithm to train the neural network according to the data given. The proposed method can effectively combine the good global searching ability of genetic algorithms with the accurate local searching feature of BP neural network. The Simulink model for PUMA560 robot visual servo system based on the improved BP neural network is built with the Robotics Toolbox of Matlab. The simulation results indicate that the proposed method can accelerate convergence of the image errors and provide a simple and effective way of robot control.     

A comparative study between dynamic adapted PSO and VNS for the vehicle routing problem with dynamic requests

Combinatorial optimization problems are usually modeled in a static fashion. In this kind of problems, all data are known in advance, i.e. before the optimization process has started. However, in practice, many problems are dynamic, and change while the optimization is in progress. For example, in the dynamic vehicle routing problem (DVRP), new orders arrive when the working day plan is in progress. In this case, routes must be reconfigured dynamically while executing the current simulation. The DVRP is an extension of a conventional routing problem, its main interest being the connection to many real word applications (repair services, courier mail services, dial-a-ride services, etc.). In this article, a DVRP is examined, and solving methods based on particle swarm optimization and variable neighborhood search paradigms are proposed. The performance of both approaches is evaluated using a new set of benchmarks that we introduce here as well as existing benchmarks in the literature. Finally, we measure the behavior of both methods in terms of dynamic adaptation.     

基于虚拟仪器的汽车变速器计算机测控系统的设计

本文介绍了汽车自动变速器检测实验台的测控系统硬件组成,并采用Labview开发出测控系统的软件。可对汽车自动变速器综合性能与液压控制阀体进行测试操作和性能分析,实现检测对象测控的自动化。     

一种新的修正恒模算法

阐述了恒模算法(CMA)、修正恒模算法(MCMA)和判决引导(DD)算法的基本原理。针对CMA和MCMA收敛速度慢,固定步长条件下收敛速度和剩余误差之间存在矛盾的缺陷,在分析CMA误差特性的基础上,利用DD算法误差函数的模值和判决器输出构造新的误差函数,提出了一种新的变步长MCMA。新算法在加快收敛速度的同时保持小的剩余误差。仿真结果表明,新算法比CMA和MCMA收敛速度快,均衡输出剩余码间干扰(ISI)小而且能克服相位偏移,具有很好的实用性。     

表面贴装过程仿真系统的研究与开发

文章从表面贴装技术(SMT)现状及特点开始,介绍多品种小批量电子产品中使用表面贴装技术存在的问题。针对这一情况对表面贴装过程仿真系统的需求进行了分析,并详细论述了仿真系统的文件预处理、仿真以及数据库维护三大主要模块设计,主要介绍采用OpenGL实现仿真模块的方法,同时展示仿真系统实现结果。最后总结了仿真系统的特点。     

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为载体的铁离子(Ⅲ)电极的研究

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为中性载体制备了PVC膜Fe3+离子选择性电极。该电极对Fe3+呈现出良好的选择性和近Nernst电位响应性能。电极斜率为21mV/dec,线性范围为3.0×10-5～1.0×10-1mol/L,检出限为1.0×10-5mol/L。采用交流阻抗技术研究了电极的响应机理,并将电极作为指示电极初步用于EDTA的电位滴定。