双包络TI-环面蜗杆传动的二次包络分析

在一次包络分析的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。齿面接触分析表明：齿面呈双线接触,润滑条件好,承载能力大,在重型机械传动装置中具有实用价值。     

变频器在机床电力拖动中的应用问题

本文分析了机床拖动的特点,变频调速对电动机及变频器的要求,分析了变频器应用中的干扰问题及采取的抑制措施。     

Efficient data selection for speech recognition based on prior confidence estimation using speech and monophone models

This paper proposes an efficient speech data selection technique that can identify those data that will be well recognized. Conventional confidence measure techniques can also identify well-recognized speech data. However, those techniques require a lot of computation time for speech recognition processing to estimate confidence scores. Speech data with low confidence should not go through the time-consuming recognition process since they will yield erroneous spoken documents that will eventually be rejected. The proposed technique can select the speech data that will be acceptable for speech recognition applications. It rapidly selects speech data with high prior confidence based on acoustic likelihood values and using only speech and monophone models. Experiments show that the proposed confidence estimation technique is over 50 times faster than the conventional posterior confidence measure while providing equivalent data selection performance for speech recognition and spoken document retrieval.     

GRM-2SD120棉线缠绕机

介绍了GRM－2SD120棉线缠绕机的结构原理，重点介绍了该机的锭子部分，口型部分，锭子盘，中胶部分，传动原理，电气原理及主要技术参数。     

A helical drive in-pipe robot based on compound planetary gearing

The modern society is fuelled by very comprehensive grids of gas and liquid pipelines. In recent years, various in-pipe robots have been developed for inspection and maintenance tasks inside such pipes. In this paper, a novel in-pipe robot is proposed and developed for gas/oil well interventions at thousands of meters downhole. Due to the nature of such intervention, in-pipe robot design must be capable of carrying a very large payload, as large as 2500?N inside a pipe with diameter as small as 54?mm. The proposed design concept is based on a compound planetary gearing system. One of the major novelties of this design is the use of pipe wall as a ring gear for one stage of the compound planetary gear system; the other novelty is the generation of helical angle when the planetary gears are expanded to press on the pipe wall. The proposed concept is compact, efficient, and has never been reported before. In this paper, the helical angle, the velocity, and load capability of the proposed system will be analyzed. The load transportation capability of the proposed robot is also measured based on an experiment. Initial data have shown great potential in carrying large payloads.     

蓝色荧光碳点的制备及检测、防伪应用

以柠檬酸钠为碳源、氨水为氮源,采用一步水热法制备了氮掺杂碳点(NCDs),对其制备条件进行了优化.采用荧光光谱仪、TEM、AFM、XPS及FTIR对制备的NCDs进行了表征,并探索了NCDs在Fe3+检测及荧光防伪中的应用.结果表明,NCDs的最优制备条件为柠檬酸钠浓度为0.1 mol/L、氨水浓度为1.8 mol/L、反应温度为200℃、反应时间6 h、装载体积25 mL.在最优条件下制备的NCDs的荧光为典型的非激发波长依赖型,最佳激发波长为343 nm,最佳发射波长为443 nm,荧光量子产率可达54.9％.NCDs为球形结构,平均粒径为4.96 nm,碳核为类石墨烯结构且其表面含有—NH2、—OH及—COOH.NCDs的荧光可被Fe3+选择性猝灭,且荧光猝灭程度与Fe3+浓度在0.1～87.5μmol/L范围内线性关系良好,检测限为50 nmol/L.此外,将NCDs配制成荧光墨水,利用喷墨打印机打印出的图案整体饱满、边缘细节清晰具有很强的可识别性.     

A New Method for Identifying Osmotically Limited and Gel Layer Controlled Pressure Independent Flux in Ultrafiltration

An unequivocal determination of whether pressure independent flux regime is osmotically controlled or gel layer dominated, is still open for discussion in the membrane literature. The present work reports a method that could be used to address this issue. It is shown that analysis of post steady state transient filtration data leads to clear demarcation of osmotically limited and gel layer controlled filtration. The method proposed in this work can also be used to estimate the additional filtration resistance offered by the polarization layer to the permeate flow in macromolecular ultrafiltration and has been verified experimentally. It has also been shown that the polarization layer thickness is not sensitive to the feed pressure but varies as a function of the bulk solute concentration; higher the bulk concentration, thicker is the polarization layer.     

四相永磁容错电机短路故障容错策略

四相永磁容错电机采用被容错齿隔开的集中式绕组结构,本质上具有一定的容错能力和故障出现后连续运行的能力.针对H桥和星形这两种驱动拓扑结构,在发生单相绕组出线端部短路时,以容错控制后的转矩满足正常需求为目标,分别采用直接转矩补偿方法和旋转磁动势不变方法进行容错控制;对两种容错控制策略进行了推导和对比分析,并对相关结果进行了磁-路联合仿真计算,验证了理论分析的正确性.     

双边剪智能剪切控制功能的研发与应用

在宽厚板项目中,双边剪用来剪切钢板两个纵边,以达到厂家要求的钢板宽度。本文除了介绍宽厚板双边剪的系统配置及功能特点外,主要阐述智能剪切的自动控制。本着降本增效的原则,开发一种新的主传动控制模式,优化双边剪电机剪切程序,在钢板厚度满足设定条件的前提下,固定侧与移动侧各采用一组电机驱动剪刃,并且实现主从电机智能激活切换模式,以满足生产需要。经实践证明,优化后的控制系统不仅提高了生产效率,还实现了节能降耗、安全生产的目的。     

二维参数化图形技术研究进展

近几年来，参数化图形技术得到了不断的发展。目前已有多种参数化图形方法及系统。这些参数化图形方法可分为３种，即变分几何法、几何推理法和过程法。主要介绍这３种方法的研究进展。