基于扩展分形和CFAR特征融合的SAR图像目标识别

研究了多信息融合技术在SAR图像目标识别中的应用。将扩展分形特征(Extended Fractal)与双参数恒虚警特征(Double Parameter CFAR)形成的多信息进行融合处理。运用Dempster-Shafer证据理论，在决策层对SAR图像中的像素进行识别分类。实验结果表明通过融合对像素分类的准确性明显好于单特征的检测结果，减少了虚警概率，提高了系统的识别能力。     

Topology optimization of trusses using genetic algorithm,force method and graph theory

In this article size/topology optimization of trusses is performed using a genetic algorithm (GA), the force method and some concepts of graph theory. One of the main difficulties with optimization with a GA is that the parameters involved are not completely known and the number of operations needed is often quite high. Application of some concepts of the force method, together with theory of graphs, make the generation of a suitable initial population well‐matched with critical paths for the transformation of internal forces feasible. In the process of optimization generated topologically unstable trusses are identified without any matrix manipulation and highly penalized. Identifying a suitable range for the cross‐section of each member for the ground structure in the list of profiles, the length of the substrings representing the cross‐sectional design variables are reduced. Using a contraction algorithm, the length of the strings is further reduced and a GA is performed in a smaller domain of design space. The above process is accompanied by efficient methods for selection, and by using a suitable penalty function in order to reduce the number of numerical operations and to increase the speed of the optimization toward a global optimum. The efficiency of the present method is illustrated using some examples, and compared to those of previous studies. Copyright © 2003 John Wiley & Sons, Ltd.     

基于小波变换的不同融合规则的图像融合研究

图像融合是一种重要的增强图像信息的方法。提出了一种基于多尺度分解的像素图像融合方法。利用小波变换按照不同融合规则及融合算子构造融合图像对应的小波系数。通过对可见光图像与红外图像进行融合的实验比较表明，以像素的局部能量为准则的融合效果更好，既可避免传统融合规则的信息损失，又提高了融合图像的空间分辨率和清晰度，融合图像更符合人的视觉特性，也有利于机器视觉。     

一种有效减少ADI-FDTD数值色散的方法

ADI—FDTD算法的数值色散效应较为明显，本文的研究表明一种通过添加各向异性媒质来修正相速误差，从而减少FDTD数值色散的方法，同样适用于ADI-FDTD，且收效更为显著。数值运算结果证明该方法能够简单有效地去除较宽频带范围内的色散。     

Belief-Propagation-Approximated Decoding of Low-Density Parity-Check Codes

In this paper, we propose a new reduced-complexity decoding algorithm of Low-Density Parity-Check (LDPC) codes, called Belief-Propagation-Approximated (BPA) algorithm, which utilizes the idea of normalization and translates approximately the intricate nonlinear operation in the check nodes of the original BP algorithm to only one operation of looking up the table. The normalization factors can be obtained by simulation, or theoretically. Simulation results demonstrate that BPA algorithm exhibits fairly satisfactory bit error performance on the Additive White Gaussian Noise (AWGN) channel.     

嵌入式数字智能涡街流量计的设计开发

针对目前涡街流重计存在精度不高的问题，采用Toeplitz自相关矩阵近似的准牛顿算法，对涡街传感器输出信号进行数字信号处理。针对客户超低功耗的要求，开发设计以超低功耗的混合信号处理器(MSP430F149)为微处理器，以采用KS0713为控制器的LCD为液晶显示模块，符合HART总线协议的嵌入式智能涡街流量计。     

改进型遗传算法在加载天线设计中的运用

遗传算法是一种全新的优化搜索方法，可以用来解决各种复杂的实际问题。针对简单型遗传算法的一些不足之处，介绍了一种改进型的遗传算法，并阐述了其在短波宽带集总加载天线优化设计中的运用。     

遗传算法在期货市场创新决策中的应用

研究了遗传算法在期货市场创新决策中的应用问题，在期货市场的保值者和投资者数目以及期货合约结构模型的基础上，设计了期货市场创新的染色体表达和遗传操作并进行了仿真研究。     

利用信息融合方法的三维特征提取

本文提出了一种基于信息融合的物体三维特征的提取方法，该方法利用两幅互相配准的三维测距图像和灰度图像，来提取多面体的三维特征。首先，通过分析灰度图像中的灰度变化及测距图像中的测距值变化，分别求取各自图像中物体的特征点及特征边；然后，利用两配准图像之间的对应关系，求得所有特征点、面与多边形在三维测距图像中的三维表示；接着，通过分析三维测距图像中所测得的各候选平面上特定点与边处的曲率及法向，验证候选平面     

绝对时钟智能控制器的研制

介绍了一种日常参数智能控制器的研制及研制过程中的几个重要问题的解决方法。特别是用于城市照明及美化城市的彩灯的开、关时间智能控制方面，给出了依据当地绝对时间、经度、纬度进行昼夜时间计算的方法，使之在不接光电传感器情况下可跟踪季节的昼夜变化。控制系统采用８９Ｃ２０５１单片机，配有时钟日历芯片ＤＳ１２８８７，系统体积小、功能强、可靠性高。