Ideal-gas thermodynamic properties for natural-gas applications

Calculating caloric properties from a thermal equation of state requires information such as isobaric heat capacities in the ideal-gas state as a function of temperature. In this work, values for the parameters of thec _p ⁰ correlation proposed by Aly and Lee were newly determined for 21 pure gases which are compounds of natural gas mixtures. The values of the parameters were adjusted to selectedc _p ⁰ data calculated from spectroscopic data for temperatures ranging from 10 to 1000 K. The data sources used are discussed and compared with literature data deduced from theoretic models and caloric measurements. The parameters presented will be applied in a current GERG project for evaluating equations of state (e.g., the AGA 8 equation) for their suitability for calculating caloric properties.     

RLL码的计算机辅助设计

本文着重讨论计算机辅助设计RLL码的具体实现问题.该过程首先根据RLL码两个参数d,k确定一个编码率p/q,然后构造出RLL码的高阶状态转换-输出符号矩阵并求相应的近似特征向量.最后通过状态分裂和状态归并过程,即可得到一个满足d,k约束的编码输出表.其中状态转换-输出符号矩阵为实现计算机辅助设计RLL码提供了有效的数据结构,而且要优化RLL码编码器,就必须有选择地进行状态分裂.     

高峰值功率重频脉冲固体激光器

综述了高峰值功率重频脉冲固体激光器的发展现状，对其中的Ｑ开关、腔倒空、锁模等窄脉冲技术和放大技术进行了分析，展示了高峰值功率重频脉冲固体激光器的发展前景。     

富勒烯光限幅技术研究新进展

介绍了富勒烯激发态吸收光限幅以及激发态吸收和其它非线性光学效应共同作用的复合型光限幅技术的研究新进展。分析了今后的研究方向。     

用线性状态观测器重构交流矢量控制系统中的负载扰动

在异步电动机磁场定向数学模型的基础上,给出了恒磁条件下异步电动机的解耦模型及传动系统的线性状态方程,并提出了重构负载扰动转矩的线性状态观测器。利用重构的负载转矩在矢量控制系统中进行扰动前馈,明显地提高了系统的抗负载扰动能力,从而为进一步提高矢量控制系统的动态性能开辟了一条有效的途径。     

Control of the quality of polymer products in continuous reactors: comparison of performance of state estimators with and without updating of parameters

In the paper the control of the product quality in polymerization reactors is analysed in the presence of persistent perturbations (unmodeled disturbances, modeling errors), as met in industrial reactors. The free radical polymerization of methyl-methacrylate in a continuous stirred tank reactor is studied. It is shown that state estimators (Extended Kalman Filters) with constant parameters cannot give offset free performance. Criteria for the selection of a set of parameters to be updated as additional states in the filter and to evaluate their effectiveness in opposing the action of realistic perturbations are given by an analysis of the linearized model of the system. Performance of different types of estimators, including one and two-time scale filters, with and without updating of parameters, is analysed by simulation on the full order process and the predictions made by previous analysis are confirmed. In the most common case of presence of perturbations affecting the energy balance and the concentration of initiator in the reactor, offset free control of the molecular weight of the product can be achieved by means of a filter which is based only on measurements of temperature and conversion and makes an update of two parameters. In the case that also the kinetic model of the polymerization reaction is affected by errors, a two-time scale filter, which makes use also of Molecular Weight values and updates three parameters, becomes necessary to obtain offset free performance.     

Chemical States of Lanthanum in Carbonized La2O3-Mo Thermionic Cathode Materials

The chemical reaction between lanthanum oxide and molybdenum carbide was studied by thermodynamic calcu-lation, thermal analysis and in-situ X-ray Photoelectron Spectroscopy. The theoretical results show that at the environment allowing for the evaporation of lanthanum, such as in high vacuum, La2O3 in the La2O3-Mo materials can be reduced to metallic lanthanum by molybdenum carbide (Mo2C). To confirm the conclusion, many analysis methods such as XRD, SPS, and TG-DTA were taken. The experimental results show that the chemical state of lanthanum changes during heat-ing. It was proved, for the first time, that reacted metallic lanthanum appears at the surface of this kind of material at high temperature.     

计及PMU的混合非线性状态估计新方法

提出一种将同步相量测量单元（PMU）的直接电压相量量测变换为间接支路电流量测，并与监控与数据采集（SCADA）量测量一起进行混合迭代的非线性状态估计方法。对构造等效电流修正量而带来的间接量测误差进行了详细和定量的分析，并对该混合估计算法的精度进行了定性分析和定量计算。理论分析和算例表明，该方法可以获得较高的估计精度，在收敛次数和滤波效果上也有所改进。     

模糊聚类在三维地震参数处理中的应用

三维地震参数是一个庞大的三维数据体，能从不同侧面反映储集层的特征。通过对三维地震参数的分析，可以评估油藏表征的参数（沉积相、构造、生长历史、流体饱和度等）。针对传统的聚类方法不能很好地综合考虑各个参数之间的相似程度，提出了用模糊C-均值聚类（fuzzy c-means clustering，简称FCM）对三维地震参数进行处理。从三维地震参数和油藏表征参数之间的关系出发，采用模糊C-均值聚类方法对三维地震参数进行处理，依此评估油藏表征的参数。测试结果表明，模糊C-均值聚类方法能够对三维地震参数进行较为准确的分类，并为储集层的研究提供了很好的依据。     

Construction of a control system for disturbance rejection using a dual observer

A well‐known control system which can reduce the adverse effects of disturbances is a disturbance observer. However, in many cases of mechanical systems, system disturbances which do not satisfy the matching condition may be imposed. Therefore, it may be difficult to reduce the adverse effects of the disturbances by the traditional disturbance observer. In this paper, a method of control system synthesis for disturbance rejection using a dual observer is proposed. This method is based on the zeroing induced by the disturbance localization problem. This problem may be solved by dividing the state space into observable subspace and unobservable subspace. As compared with an H_∞ controller based on perfect observation, the usefulness of the proposed control system for disturbance rejection is demonstrated by numerical simulations for a two‐mass spring system. © 2002 Scripta Technica, Electr Eng Jpn, 138(4): 50–60, 2002; DOI 10.1002/eej.1138