四川盆地及邻区上二叠统一下三叠统海槽的深水沉积特征

四川盆地及邻区广元-旺苍、城口-鄂西、开江-梁平海槽是上二叠统一下三叠统飞仙关组（P3-T1f）的深水碳酸盐沉积区。该区上二叠统上部大隆组是硅质岩、硅质泥岩、硅质灰岩组合，含放射虫、有孔虫等化石，厚125—29．0m，为海槽裂陷期凝缩沉积。三叠系飞仙关组下部为远洋沉积的暗色泥岩、微晶碎屑灰岩和重力流沉积的浊积岩、角砾灰岩组成的深水碳酸盐沉积，厚50．0～300．0m，是裂陷期后的海槽充填沉积。海槽相区沉积在晚二叠统世末达到最大海泛面沉积了大隆组。海平面缓慢下降期沉积了补偿充填性质的飞仙关组深水碳酸盐岩。海槽相区上二叠统一下三叠统飞仙关组构成了一个完整的三级层序。深水沉积物的有机碳平均值高达6．21％，是良好的烃源岩。但在海槽相区上二叠统不发育生物礁，飞仙关组缺乏鲕粒岩。     

CHAOTIC HYDRODYNAMICS IN HORIZONTAL GAS-LIQUID BUBBLY FLOW

ＮＯＭＥＮＣＬＡＴＵＲＥｄ———ｅｍｂｅｄｄｉｎｇｄｉｍｅｎｓｉｏｎ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＣｄ(ｒ)———ｃｏｒｒｅｌａｔｉｏｎｓｕｍ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＮ———ｎｕｍｂｅｒｏｆｐａｉｒｓｏｆｐｏｉｎｔｓｏｎｔｈｅｒｅｃｏｎ ｓｔｒｕｃｔｅｄａｔｔｒａｃｔｏｒ,ｄｉｍｅｎｓｉｏｎｌｅｓｓｒ———ｓｃａｌｉｎｇｄｉｓｔａｎｃｅ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＤｃ ———ｃｏｒｒｅｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＫ———Ｋｏｌｍｏｇｏｒｏｖｅｎｔｒｏｐｙ ,ｂｉｔｓ/ｓＲ…     

烟机结垢的成因分析及防范措施

通过对烟机垢物的元素和晶体组成进行表征，分析其形成条件，计算验证并探讨垢物的形成过程，并提出应对防范措施。烟机结垢过程为：极少数原料油滴在反应汽化段内未完全汽化，未汽化油黏附在催化剂细粉表面并缩合生焦；部分焦炭颗粒未在再生器内烧尽，进入烟道后继续燃烧达到细粉的熔融温度，转化为液相黏性物质；携带微量高温熔融粉尘的烟气在三级旋风分离器下料口、烟机叶片等部位受高速离心作用，黏附到易结垢部位，形成无定形垢物。可通过提升原料油喷嘴雾化效果，调整合适的剂油比和系统细粉含量来减少烟机结垢。     

分子筛绿色化合成技术的开发

对现有分子筛合成废液中氨氮及还原性物质的来源进行分析，确定降低排放废水中氨氮浓度及COD的方案。对现有ZRP-5分子筛制备流程进行优化，增加母液及赶胺水回用工序；建立母液浓缩装置，将钛硅分子筛及Β分子筛的合成母液及重排母液应用于ZSM-5分子筛的合成，实现废液的梯级利用。上述措施既解决了因分子筛生产废液的排放造成的环境污染，亦因废物资源化降低了ZSM-5分子筛的生产成本。     

水泥砂浆衬里在输水钢管内壁防腐中的应用

结合工程实例,阐述了在输水水质腐蚀性不大的情况下,输水钢管的内壁防腐采用水泥砂浆衬里的必要性和优点,并介绍了设计要点和安装施工注意事项。     

西气东输对南水北调穿黄隧洞影响动力分析计算

西气东输管线距离南水北调工程穿黄河隧道的最近距离:河漫滩仅150 m,主河槽仅205 m.输气管线在运行过程中,存在着因误操作、管道腐蚀、自然灾害或人为破坏等因素引发事故发生爆炸的可能.对深泓区穿黄隧洞地下部分在天然气爆炸冲击波作用下的安全性进行动力分析计算,认为西气东输管道破裂引起的天然气爆炸,不会对南水北调输水隧洞产生破坏影响.     

Niobium-containing catalysts—the state of the art

This review article is devoted to the materials containing niobium, which have been discovered or developed in the past few years and exhibit the potential application in heterogeneous catalysis. Niobium oxides and mixed oxides as well as sulfides, nitrides (oxynitrides), carbides (oxycarbides), and phosphates are considered. Among the catalytic processes in which Nb-containing materials were tested, liquid and gas phase oxidation is described in details, and the role of niobium in the prevention of the catalyst from SO₂ poisoning is mentioned.     

川西新场气田JS_2~1气藏测井多参数评价方法

针对川西新场气田JS12气藏开展了多参数的综合评价研究,多参数包括储层参数、裂缝参数、储层分类厚度参数。首先,开展了储层参数及裂缝参数的计算,以岩心分析结果为依据,建立了孔隙度、渗透率、含水饱和度计算模型。利用铸体薄片进行了微裂缝识别,对样品的裂缝参数和测井曲线进行相关分析,建立了测井计算裂缝参数的数学模型;其次,对储层进行聚类分析,通过聚类将储层分为三类;最后,将计算的裂缝参数、储层分类中的Ⅰ类储层厚度、孔渗饱等参数进行正态化处理,拟和测试的无阻流量与这些参数建立多元回归计算模型,即综合含气指标的数学计算模型。以综合含气指标为主要依据,进行储层综合分类和评价,指出了有利的含气区域和可供挖潜井的建议。该方法在指导气藏开发中获得了良好效果。     

Improving the Calibration of Vacuum Gas Flow – Control Leak Gauges

A new and original method of calibrating helium leaks that makes it possible to take into account the existence of a number of auxiliary phenomena is described. For this purpose, a hollow leak the purpose of which is to reproduce only desorbed gas flows, is introduced into the vacuum system of the calibration bench. Analysis of the results of corresponding cumulation measurements makes it possible to introduce corrections for these phenomena.     

Monte Carlo simulation of gas phase polymerization of 1,3‐butadiene. Part II: Kinetics optimization and confirmation

Studies on the deactivations and initiations of gas phase polymerizations of 1,3‐butadiene have been achieved by Monte Carlo simulation. Initiation and deactivation control the reaction before and after the peak of the polymerization rate, respectively. The influence of polymerization temperature has been studied. Monte Carlo modeling of polymerization kinetics and mechanism was confirmed by the agreement of experimental data and simulation results of polymerizations run with a temporary evacuation of monomer. The balance of catalysts and active chains is established by both initiation and chain transfer reactions with cocatalyst, which causes a ‘pseudo‐stability’ stage. © 2003 Society of Chemical Industry