DDS的雷达杂波信号模拟系统的研究

介绍了雷达杂波信号的建模与仿真原理，给出了一个基于直接数字频率合成的雷达杂波信号模拟系统的设计实例，该系统采用丁软硬件相结合形式，能灵活生成包括地杂波、海杂波、云雨杂波、箔条杂波在内的多种信号波形的雷达杂波回波信号。     

Modeling Temperature in Coupled Electrical and Thermal Simulations of the Electroconsolidation® Process

Electroconsolidation® is a process for densifying complex-shaped parts by using electrically conductive particulate solids as a pressure-transmitting medium. The part is immersed in a bed of the particulate medium contained in a die chamber. Sintering temperature is achieved by resistive heating of the medium while applying compaction pressure. The process is capable of ultrahigh temperatures and short cycle times and offers the potential for low processing costs.

Control of the process and selection of process conditions require knowledge of the temperatures within the die. Temperature gradients exist because of the high heating rate and because of variations of density and electrical resistivity of the medium due to the presence of the part. Direct measurement of temperature with thermocouples or other conventional means is impractical because of the high temperatures, high currents, and high pressures that are involved. Therefore, a computer model was developed to predict temperature as a function of time and applied voltage for any location in the die. The computer model is composed of three parts: a geometrical model to approximate the density and resistivity variations in the medium, a finite-element model to calculate the rate of resistive heating within each element, and a finite-difference model to calculate the temperature distribution based on solution of the heat-transfer equations. Predicted temperatures have been shown to be in excellent agreement with measurements, and numerical simulation provided encouraging consistency and reasonably accurate predictions of temperature profiles within the die. The model demonstrated the feasibility of a new process to achieve simultaneous application of pressure and heat to powder densification in Electroconsolidation.     

Influence of a Jump in the Power of Laser Radiation on Its Measurement

Simulation and investigation of the effect of an isolated jump on realization of the unit of power of laser radiation and dissemination of the size of the unit are considered. Results are obtained by means of a newly developed algorithm that characterizes the behavior of the mean value of a signal and the standard deviation of a system as functions of the parameters of a jump in the power of laser radiation and the length and amplitude of the jump. If information concerning the time when a jump occurs is available, the proposed algorithm makes it possible to take into account how a jump affects the ultimate result of a measurement.     

Oxygen Tracer Diffusion in Vitreous Silica

Oxygen diffusion in vitreous silica glass is studied using the gas exchange technique. The tracer concentration profiles are consistent with a model based on two mechanisms, one network and the other interstitial. These processes are coupled through limited network–interstitial exchange. Nuclear reaction analysis and secondary ion mass spectrometry techniques are performed and compared. These results are compared to experiments on transport in thin silica films grown on single-crystal silicon.     

Spectral estimation of video signals

Spectrum analyzers are ubiquitous in laboratory work concerning one dimensional signals. This is because linear operators are best examined in the frequency domain. Linear operators, such as linear filters, DCT coders, line shufflers, etc., dominate also the video systems scenario. Their frequency domain study is as appropriate and informative as it is in the case of their one-dimensional counterparts. This paper considers the problems associated with the introduction of two well-known spectral estimation techniques, the periodogram and AR estimates, to the context of television signals. The potential for application of spectral estimation to video problems is exemplified by a number of applications related to the fields of enhanced quality television and HDTV. Special attention is paid to the computational aspects, whose effective solution conditions the practical applicability of the proposed spectral estimation techniques.R. Rinaldo is currently at the Department of Electrical and Computer Engineering of the University of California, Berkeley.     

试制STM-R80钻探用无缝钢管

采用42MnMo7、41MnV5钢锻坯,经热轧穿孔、冷拔加工,试制出STM-R80地质钻探管。该地质管经检验和使用,质量符合要求。介绍了钢的化学成分、试制的主要工艺过程及其参数。     

Modeling the continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor

A model of continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor is developed using phase equilibria assumption and the method of molecular weight moments. The model equations can be simplified into a polynomial system that has 17 equations and 17 unknowns. Solution of the polynomial system gives out almost every aspects of the continuous transesterification process. Molecular weight and polydispersity index, end group ratio of hydroxyl to phenyl carbonate, contents of molecular species, and lost diphenyl carbonate fractions are studied in different operation parameters.     

A new approach for sequential experimental design for model discrimination

Model discrimination procedures are useful tools for selection of the best mathematical models to be used to represent a specific chemical process. The present paper presents and discusses a new sequential discrimination procedure, which makes use of model probabilities and concentrates the efforts on models with higher probabilities. Model probabilities are determined based on simple statistical arguments. Four numerical examples illustrate the application of the proposed discrimination procedure. The obtained results indicate that the new procedure is able to discriminate kinetic models with fewer experiments when compared to other procedures and also indicates when model discrimination is not possible and, thus, when the sequential design must be halted. Furthermore, the speed of the proposed discrimination procedure can be controlled by tuning a design parameter which reflects the analyst's mood (confidence) towards the discrimination problem and allows for increase or decrease of the number of experiments required for model discrimination during the sequential procedure.     

Seismic Physical Modeling Technology and Its Applications

1. Introduction Seismic physical modeling technology is an important method for the research on seismic exploration theory and methods. In seismic physical experiments, the earth, mantle or field site are scaled down to physical models according to the similarity principle, and then the seismic field and its variation are observed in the laboratory for the research work on the theories and methods of the earth structure, earthquake forecasting, energy and mineral resource exploration, and engi…