新一代智能城域光网络

本提出了一种标准化的光控制平面。阐明了开了用于光传输网的控制平面所遇到的选择与挑战。光控制平面被分解成邻居发现、服务发现、连接控制和拓扑、资源发现等几个基本的过程。不同的网络组织和分割导致了几个不同的自动配置模型：软性持久链路模型、用户接口模型和对等模型。这是构成以IP为中心的光传输网的控制和管理基础。同时也介绍了基于SDH光交换的新一代CIENA公司智能光网络，它具有大容量光交换能力和网络拓扑结构自动发现、端对端电路配置、带宽动态分配等功能及特点，将大大提高数据、电路业务的服务质量，新一代智能光网络是干线和城域网络交换传输最佳的选择。     

转移法色交换

将图Ｇ的着色由一种变为中一种，通常用Ｋｅｍｐｅ法以交换。但是，对于某些情况，用此法无效。针对这个问题，本文提出了一种转移法色交换，它适用于平面图着色，方法直观，清晰且有效。     

Effect of Channel Changes in the St. Clair River During the Present Century

Periodic man-made changes in the outlet of Lake Huron through the St. Clair River date back to the middle of the last century. These artificial channel changes have been well documented during the present century. They consist of dredging for commercial gravel removal in the upper river during 1908–25 and uncompensated navigation improvements for the 7.6-m (25-ft) and 8.2-m (27-ft) projects completed in 1933 and 1962, respectively. The total effect of these changes on the levels of Lakes Michigan and Huron (hydraulically one lake) and on the upper St. Clair River profile was determined with dynamic flow models. The ultimate effect of the above dredging was a permanent lowering of the Lake Michigan-Huron levels 0.27 m (0.89 ft), which represents a tremendous loss of freshwater resource [32 km³ (7.7 mi³)].     

From hospital to municipal cogeneration systems: an Italian case study

A mixed integer linear programming model combined with a more traditional design by scenarios is proposed to optimize facilities size and operation mode of a municipal energy system involving significant civil centres and a hospital. Moving from the need of a new heat and power station for the local hospital due to the construction of new pavilions, the opportunity of involving other centres in the neighbourhood in a distributed cogeneration system is analysed, increasing system complexity step by step. Smaller cogeneration units tailored to hospital needs are rewarding ventures with relatively low risks but, in a country whose traditional power generation systems heavily rely on fossil fuels and where energy policy and market conditions can make it profitable to sell surplus power, district heating systems foster the installation of larger cogenerators and lead thereby to higher profits and to better performance as for primary energy savings and greenhouse gases emission reduction. Copyright © 2006 John Wiley & Sons, Ltd.     

Techniques for estimating test length under random test

When a circuit is tested using random or pseudorandom patterns, it is essential to determine the amount of time (test length) required to test it adequately. We present a methodology for predicting different statistics of random pattern test length. While earlier methods allowed estimation only of upper bounds of test length and only for exhaustive fault coverage, the technique presented here is capable of providing estimates of all statistics of interest (including expected value and variance) for all coverage specifications.Our methodology is based on sampling models developed for fault coverage estimation [1]. Test length is viewed as awaiting time on fault coverage. Based on this relation we derive the distribution of test length as a function of fault coverage. Methods of approximating expected value and variance of test length are presented. Accuracy of these approximations can be controlled by the user. A practical technique for predicting expected test length is developed. This technique is based on clustering faults into equal detectability subsets. A simple and effective algorithm for fault clustering is also presented. The sampling model is applied to each cluster independently and the results are then aggregated to yield test lengths for the whole circuit. Results of experiments with several circuits (both ISCAS '85 benchmarks and other practical circuits) are also provided.This work was done while the author was with the Department of Electrical Engineering, Southern Illinois University, Carbondale, IL 62901.     

Energy minimization and design for testability

The problem of fault detection in general combinational circuits is NP-complete. The only previous result on identifying easily testable circuits is due to Fujiwara who gave a polynomial time algorithm for detecting any single stuck fault inK-bounded circuits. Such circuits may only contain logic blocks with no more thanK input lines and the blocks are so connected that there is no reconvergent fanout among them. We introduce a new class of combinational circuits called the (k, K)-circuits and present a polynomial time algorithm to detect any single or multiple stuck fault in such circuits. We represent the circuit as an undirected graphG with a vertex for each gate and an edge between a pair of vertices whenever the corresponding gates have a connection. For a (k, K)-circuit,G is a subgraph of ak-tree, which, by definition, cannot have a clique of size greater thank+1. Basically, this is a restriction on gate interconnections rather than on the function of gates comprising the circuit. The (k, K)-circuits are a generalization of Fujiwara'sK-bounded circuits. Using the bidirectional neural network model of the circuit and the energy function minimization formulation of the fault detection problem, we present a test generation algorithm for single and multiple faults in (k, K)-circuits. This polynomial time aggorithm minimizes the energy function by recursively eliminating the variables.     

npn AlGaN/GaN HBT模型与特性分析

基于实验数据对GaN材料的少子寿命和碰撞电离率进行了建模,应用漂移-扩散传输模型开展了npnAlGaN/GaN异质结双极晶体管的特性研究,给出了器件导通电压、偏移电压和饱和电压的解析式.结果表明:实际器件导通电压、偏移电压及饱和电压较大的原因主要是高基区电阻和基区接触的非欧姆特性,为器件的工艺制造提供了理论指导.     

Is the Promissory Note of Personality as Vulnerability to Depression in Default? Reply to Zuroff, Mongrain, and Santor (2004).

In contrast to D. C. Zuroff, M. Mongrain, and D. A. Santor (2004), the current authors find the promissory note of dependency-sociotropy (DEP-SOC) and self-criticism-autonomy (SC-AUT) as a model of risk for depression to be in default. The authors propose reorganizing what has been cast as unitary effort into 3 distinct endeavors: a psychoanalytic clinical theory, development of a refined empirical model of risk for clinical depression, and research examining the effects of DEP-SOC and SC-AUT on interpersonal relationships in nonclinical samples. The authors identify some issues that need to be accommodated regardless of whether the assessment of Zuroff et al. (2004) or their own is accepted. DEP-SOC and SC-AUT are best construed as correlated, continuous dimensions. Future work also needs to accommodate depression as chronic recurrent condition, advances in developmental psychopathology, and more stringent criteria for positing a risk factor for clinical disorder. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Improving Measurement Precision of Test Batteries Using Multidimensional Item Response Models.

A conventional way to analyze item responses in multiple tests is to apply unidimensional item response models separately, one test at a time. This unidimensional approach, which ignores the correlations between latent traits, yields imprecise measures when tests are short. To resolve this problem, one can use multidimensional item response models that use correlations between latent traits to improve measurement precision of individual latent traits. The improvements are demonstrated using 2 empirical examples. It appears that the multidimensional approach improves measurement precision substantially, especially when tests are short and the number of tests is large. To achieve the same measurement precision, the multidimensional approach needs less than half of the comparable items required for the unidimensional approach. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Geometry-Dependent R-Curve for Quasi-Brittle Materials

Fracture of quasi-brittle materials such as ceramics and cement-based materials can be described by an R -curve, defined as fracture resistance. The R -curve can be constructed as the envelope of the strain energy release rates ( G ). In this study, R -curve is defined as an envelope of G -curves obtained by varying the dimensions of identical specimens, while keeping the geometry and the initial flaw size constant. By approximating the G -curve with a second-order function of the crack length, a simple formulation of the R -curve is derived by solving a differential equation. Three parameters are needed for the proposed R -curve. These parameters can be obtained by testing a notched-beam specimen and using linear elastic fracture mechanics. The proposed R -curve simulates well the geometry dependency as well as other characteristics of the fracture response of quasi-brittle materials.