Influence of alloy ingredients on mechanical properties of ternary boride hard alloy clad materials

Using Mo, B-Fe alloy and Fe powders as raw materials, and adding C, Cr and Ni ingredients, respectively, or C, Cr and Ni mixed powders, ternary boride hard alloy clad materials was prepared on Q235 steel substrate by means of in-situ reaction and vacuum liquid phase sintering technology. The influence of alloy ingredients on the mechanical properties of ternary boride hard alloy clad materials was investigated. The results indicate that a mixture of 0.8% C, 5% Cr and 2% Ni ingredients gives a ternary boride hard alloy clad material with optimal mechanical properties, such as high transverse rupture strength, high hardness and good wear resistance.     

一种新型模具材料DGJ W40钢结硬质合金

采用一种特殊铸造工艺成功地研制了一种新型模具材料———DGJW40钢结硬质合金 ,它不仅可以锻造改形 ,还具有良好的热处理性能 ,用在拉丝、拉伸及挤压等模具上取得了良好的效果     

BP神经网络在液压试验台故障诊断中的应用

分析了BP神经网络的结构及算法，并对液压试验台的故障模式用BP神经网络来进行诊断，从而提出了一种新的解决液压试验台故障诊断的方法。     

一种用于IGBT模块的新型半桥驱动电路

介绍了一种高性能、高压集成新型半桥IGBT驱动电路.该驱动模块内部集成两路独立驱动和独特的故障"局域网"保护电路,驱动能力强,体积封装小,易于逆变器的小型化设计,并介绍了该驱动模块在便携式柴油发电机逆变电源中的应用,讨论了设计中应注意的问题.实验结果证明,该驱动电路结构简单,性能优越,能够实现对IGBT的可靠驱动和保护.     

��������еĶഫ������Ϣ�ںϼ���

 多传感器信息融合是一个新的研究领域，它应用到故障诊断领域还是近几年的事。文章主要论述了多传感器信息融合技术的基本概念、工作原理及常用方法，同时还介绍了其在故障诊断中的应用实例。     

Influence of the stress,strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

In recent years, the finite element method (FEM) has become the main tool for simulating the metal cutting process because research based on trial and error is time consuming and requires high investment. Early studies were done by different investigators. In this research AISI 52100, hardened steel (62 HRC) was selected for an orthogonal machining process as well as metal cutting simulation using the software DEFORM-2D. This software is based on a forging process and has been adapted to an orthogonal machining process. The results of simulated cutting forces were compared with experimental cutting force data to validate the orthogonal cut simulation. Also, the surface roughness was measured, and the influence of the stress, strain, and temperature on the surface roughness was studied.     

Feedrate optimization and tool profile modification for the high-efficiency ball-end milling process

Trend in die/mold machining is to produce highly quailed surface using the high-speed hard machining with the ball-end cutter. The ball-end milling is, however, less efficiency than the flat end milling. It is important to optimize the feedrate that gives the maximum material removal rate constrained by an allowable surface roughness. The state-of-art of the CBN ball-end cutter technology allows increasing the tooth feed for high-speed and high-efficiency machining. However, because the spherical shape of the cutter can result in the scallop-liked cusps on the machined surface, the surface roughness consideration makes a feedrate limitation to the CBN cutter. In this paper, the optimization of the feedrate by considering the generated-scallop effect of the ball-end cutter has been studied. It was found that the tooth feed must be kept within one third of the path pick in order to keep the feed-interval scallop height not over the path-interval scallop height. Therefore, the potential capability of the CBN cutter for the larger tooth feed (i.e. high efficient) machining can not be fully exploited. It was found a notch-cut on the center of the ball-end cutter reduced the feed-interval cusp height, thus allowing an increased feedrate of more than 50% compared with the standard ball-end cutter. If the parameters of the notch-cut profile can be optimized, it is believed that the feedrate can be further increased.     

水性聚氨酯结构与微相分离的研究

合成了一系列水性聚氯酯，并用红外光谱、差示扫描量热仪对乳液胶膜进行表征，考察了软段组成、DMPA含量及。(-NCO)：n(-OH)比值对产物微相分离的影响。实验结果表明：聚醚型产物的微相分离程度高于聚酯型产物。提高DMPA用量，软段Tg移向低温区，说明体系的做相分离程度加大。随着n(-NCO)：n(-OH)比值的增大，软段Tg也移向低温区，软硬段的微相分离程度增大.     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.     

软段含离子基团的阴离子型水性聚氨酯胶粘剂的研究(Ⅱ)——硬段结构的影响

以含有不同离子基团的聚酯多元醇为软段,采用丙酮法合成了一系列水性聚氨酯乳液。研究了不同硬段结构和硬段含量和扩链剂对其干膜物理机械性能和吸水率的影响。