丙烯酸改性聚氨酯的合成与性能的研究

采用聚丙烯酸酯与聚氨酯共混、以水性聚氯酯为种子乳液进行丙烯酸种子乳液聚合以及水性聚氨酯与丙烯酸接枝共聚3种方法分别得到丙烯酸改性水性聚氯酯，通过激光散射粒径仪测定乳胶粒的粒径、乳胶膜的透明性、傅里叶变换红外光谱(FTIR)结构分析以及扫描电镜(SEM)对乳胶膜结构和表面形貌进行分析。结果表明：采用种子乳液聚合反应和接枝反应所得到的丙烯酸改性水性聚氯酯乳液乳胶粒粒径比水性聚氨酯的粒径显增大，表现出良好的相容性；由种子乳液聚合和接枝聚合制备的丙烯酸改性水性聚氯酯胶膜中颗粒与颗粒之间结合紧密，表面光亮、透明。     

关于氟化氢生产中原料混合问题的讨论

在无水氟化氢生产原料中，添加了发烟硫酸作为新原料。由于液体原料混合方法的不同，在生产中会产生不同的效果。本文介绍了预混合法和在线混合法的优缺点。     

Synthesis,characterization, and application of PVP/chitosan blended polymers

The purpose of this study was to research the compatibility and application of polyvinylpyrrolidone (PVP)/chitosan blended polymers. The polymers were synthesized at different weight ratios and tested using techniques such as Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis to evaluate the compatibility of the blended materials. Incompatibility occurred when the quantity of chitosan exceeded 75%. The addition of PVP was beneficial for the thermal stability of chitosan, but resulted in inferior strength performance. Furthermore, the blended polymers did not show a color‐enhancement effect, but did show elevated water absorption, chlorine resistance, and colorfastness. In addition, the treated fabrics with a higher chitosan ratio in the blended polymer had antimicrobial properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 885–891, 2006     

几种合成橡胶的共混、硫化特性与性能的研究

研究了PUR／CR，CSM／NBR，EPDM／IIR几种合成橡胶的共混和硫化特性，以及共混比对共混胶力学性能、耐热老化性能、耐油性能、压缩永久变形和动态力学性能的影响。     

数字化煤场与配煤掺烧技术的实施要点初论

优化配置不同种类、不同性质的煤炭,将其掺配成在综合性能上呈最佳状态的新煤种,满足锅炉在不同条件下的各种需要;开发数字化煤场,实现煤场的数字化动态管理。主要分析、研究了数字化煤场和配煤掺烧技术的实施要点。     

聚乙烯电缆料的高速挤出技术

研究了聚乙烯绝缘料的高速挤出特性。结果表明：通过共混改性，添加合理的助剂及良好的工艺条件能较好地实现PE电缆绝缘料的高速挤出。     

复合型导电塑料的研究进展

介绍了复合型导电塑料的种类。特性与应用，讨论了它们的导电机理及影响导电性的因素。着重全叙述了国内外对添加抗静电剂、导电填料以及共混复合型导电塑料的研究现状与发展趋势。     

PBT共混改性研究最新进展

综述了最近几年国内外聚对苯二甲酸丁二醇酯(PBT)共混改性的研究进展,分类介绍PBT/聚烯烃、PBT/同系聚酯、PBT/液晶、PBT/弹性体、PBT/聚碳酸酯等不同共混体系,讨论了各体系中的相行为、相容性、热稳定性、力学性能等,并对该类共混物的发展趋势作了简要的分析。     

异氰酸酯对聚乳酸/热塑性聚氨酯共混物性能的影响

以4,4^′-二苯基甲烷二异氰酸酯（MDI）为反应增容剂，采用熔融共混法制备了不同MDI含量的聚乳酸/热塑性聚氨酯（PLA/TPU）共混物，采用傅里叶变换红外光谱仪（FTIR）、万能试验机、冲击试验机、扫描电子显微镜（SEM）、差示扫描量热仪（DSC）和旋转流变仪对共混物力学性能、微观形态、热性能和流变性能进行了研究。结果表明：MDI可以有效改善共混物的力学性能，当MDI质量分数为1%时，共混物力学性能最佳，缺口冲击强度为40.0kJ/m²，断裂伸长率为214.1%，与未加MDI的共混物相比，分别增加了4.3倍和5.8倍，拉伸强度稍有下降（47.6MPa）；SEM表明，MDI的加入提高了共混物的相容性，加入MDI后，共混物的断面由海-岛结构变为核-壳包覆结构，相界面作用力增强；DSC测试表明，共混物的玻璃化转变温度、冷结晶温度和熔融温度随着MDI含量的增加而升高；流变测试表明，MDI质量分数的增加，共混物呈现更显著的剪切变稀行为，推测共混反应机理为：MDI质量分数的增加，体系内依次发生PLA的扩链、支化和TPU的交联。     

Use of natural rubber‐g‐polystyrene as a compatibilizer in casting natural rubber/polystyrene blend films

Natural rubber/polystyrene (NR/PS) blend films with weight ratios of 70/30, 60/40, and 50/50 were prepared using polystyrene grafted natural rubber copolymers (NR‐g‐PS) as the compatibilizer. Copolymers with molar ratios of 90/10, 80/20, and 70/30 were synthesized via emulsion copolymerization using tert‐butyl hydroperoxide/tetraethylene pentamine as an initiator. The copolymers were subsequently added into the blends at 0, 5, 10, 15, 20, 25, and 30 phr. The mixtures were cast into films by the solution‐casting method using toluene as the casting solvent. Mechanical and morphological properties of the prepared films were investigated. The film prepared from 80/20 NR‐g‐PS showed higher tensile and tear strength, as well as finer domain size of the dispersed phase, than those prepared from 90/10 and 70/30 NR‐g‐PS. However, the mechanical properties of the films were decreased at high loading of the copolymers. In addition, themogravimetric analysis revealed that weight loss was decreased upon introduction of the compatibilizer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 826–831, 2005