形态学边缘检测的新算法及其应用

提出了一种基于数学形态学的边缘检测的所算法，该算法具有简便和灵活可编程控制等优点，比原来主算法更国完善，在实际应用中有着很好的前景，并给出了实验结果。     

How to study drying shrinkage microcracking in cement-based materials using optical and scanning electron microscopy?

Three different ‘destructive’ microscopy methods were tested on their ability to show drying shrinkage microcracks on a specimen cross-section. The first two were methods in which the microcracks were impregnated with a fluorescent epoxy and examined with fluorescence microscopy. In one method, the impregnation was applied before making the cross-section and in the other after making the cross-section. In the third method, the sample was kept wet constantly and examined in an environmental scanning electron microscope (ESEM). It was concluded that the method in which the dried specimen was impregnated before making the cross-section was the most reliable method to record drying shrinkage microcracks. With this method, it was possible to impregnate the complete drying shrinkage microcrack pattern in the studied cement-based materials from the surface, and there was no risk of recording microcracks introduced by sample preparation.     

数字图像边缘检测算子的性能实验比较

本文对数字图像中几种具有代表性的边缘检测算子进行了理论分析，并通过VC编程实验，对各种算法进行实现，通过比较得出了各自的优缺点和适用范围。     

补偿式光纤F—P干涉仪的信号处理系统

本文提出并研制成补偿式光纤F-P干涉仪信号处理系统,提出了用来测量微小位移信号的三种方法及电路,即透射峰时间间隔测量法、光脉冲基波幅度测量法(精密整流法)、鉴相法。测试结果表明:时间间隔测量法,它的最大灵敏度达到0.26纳米/微秒;精密整流法,最大灵敏度为2.38纳米/伏特。     

Background-subtraction using contour-based fusion of thermal and visible imagery

We present a new background-subtraction technique fusing contours from thermal and visible imagery for persistent object detection in urban settings. Statistical background-subtraction in the thermal domain is used to identify the initial regions-of-interest. Color and intensity information are used within these areas to obtain the corresponding regions-of-interest in the visible domain. Within each region, input and background gradient information are combined to form a Contour Saliency Map. The binary contour fragments, obtained from corresponding Contour Saliency Maps, are then fused into a single image. An A^* path-constrained search along watershed boundaries of the regions-of-interest is used to complete and close any broken segments in the fused contour image. Lastly, the contour image is flood-filled to produce silhouettes. Results of our approach are evaluated quantitatively and compared with other low- and high-level fusion techniques using manually segmented data.     

金属表面柴油机油沉积物的反射红外光谱法研究

利用镜反射红外光谱法研究了ＣＣ级柴油机油中添加剂对成漆板板面漆膜组成的影响：考察了成漆板漆膜组成与Ｃａｔ．１Ｈ２活塞环台漆膜组成的相关性。试验结果对柴油机油的研制和应用有一定指导作用。     

红外热象仪在电力系统中的应用

本文主要阐述使用红外热象仪检测运行中的电力设备所发现的问题。文中通过若干实例介绍了用红外热象仪检测带电运行的发电机、电容器及连接头，并查出带有严重缺陷的部位，从而避免事故发生。     

In Situ FTIR Study of the Formation of an Organosilane Layer at the Silica/Solution Interface

An FTIR experiment especially designed to study the growth of an organosilane layer at the interface between a solution and a flat silica surface is presented. High sensitivity is achieved by using the attenuated total reflection (ATR) technique in a liquid flow cell. The ATR crystal, either silicon or germanium, is covered with a very thin silica layer. Chemical reactions of a mono-and a di-hydrolyzable silane with the silica substrate have been investigated. The grafting of a submonolayer of the first reagent has been monitored by following the C-H and SiO-H vibrations. The density of grafted molecules has been estimated and information on the nature of the chemical bonding has been achieved. Evidence for the chain-polymerization of the dihydrolyzable silane at the substrate/solution interface has been inferred from the appearance of a Si-O-Si absorption band.     

高功率激光焊接光致等离子体的检测

系统地归纳了高功率激光焊接过程中光致等离子体的声、光、电、热等四种特征信号,综述了国外在等离子体信号检测方面的试验方法及研究进展,分析了未来的发展趋势。     

An infrared spectroscopic study of the mechanism of chloromethane conversion to higher hydrocarbons on HZSM5 catalyst

Investigation of the reaction mechanism of chloromethane on ZSM5 is a new topic. In this work an in situ FTIR technique was employed to study the conversion processes of chloromethane, the active sites on HZSM5, and the desorption state of surface species. The catalytic conversion of chloromethane to higher hydrocarbons was also studied. It is demonstrated that chloromethane can be reversibly adsorbed on acidic sites of HZSM5 at room temperature. At 100°C chloromethane is irreversibly and dissociatively adsorbed on the strong acidic sites of HZSM5, on which surface methoxyl is formed as proved by infrared characteristic C-H stretchings of-CH₃ at 2960 and 2870 cm^–1. Alkoxyls are produced and adsorbed on the catalyst surface as characterized by the infrared absorption bands of -CH₂-groups at 1460 and 2930 cm^–1. At 100°C the adsorbed methoxyl and alkoxyls are the main surface species, and a small amount of aromatics might exist as detected by a characteristic absorption band at 1510 cm^–1. Between 100 and 200°C the adsorbed surface methoxyl and alkoxyls are converted to aromatics, and the occupied OH groups partially appear. At temperature higher than 300°C the adsorbed aromatics are thermally desorbed into the gas phase. Aromatics and alkanes are the main products in catalytic conversion. These results reveal that the formation of aromatics from methoxyl and alkoxyls is easier than the desorption of aromatics from HZSM5 catalyst. An alkoxyl mechanism is proposed for the conversion of chloromethane on HZSM5 based upon the experimental results and the three assumptions: (a) The primary C-C bond is formed from surface methoxyl groups via the methoxyl group polarization and C-H bond weakening, (b) The adsorbed alkoxyls are converted to aromatics via hydrogen transfer and bond rearrangement similar to the conventional carbenium ion mechanism for the aromatization of olefins and alkanes on HZSM5. The hydrogen atoms from the aromatization stimulate the desorption of alkoxyls to alkanes. (c) At temperature higher than 300°C surface reactions and desorption of adsorbed species take place simultaneously, determining the product distribution in the catalytic conversion.