有机磷化物制备羟基磷灰石工艺条件的探讨

探索用有机磷化物制备羟基磷灰石的工艺条件：采用硝酸钙、氨水、磷酸三丁酯为原料进行正交对比研究，优化得到了制备较佳羟基磷灰石的工艺条件。优化的工艺条件为：原料中Ca／P（molar ratio）1．67；Ca（NO3）2、4H2O／NH3H2O（g／g）为0.99；烧结温度为850℃：恒温时间为5h，并对合成的样品进行了化学和红外光谱的分析。     

Infrared study of salt free and salt treated cellulose pyrolysis under nitrogen atmosphere

The pyrolysis under nitrogen of salt free and salt treated cellulose was studied by infrared spectroscopy. The results confirm the unzipping mechanism suggested by DTA and TGA studies, and show this mechanism to apply to the untreated and salt treated samples. The results also show the unzipping to stop at the stage of char formation. The onset of this stage was found to occur after the volatilization of only 45–50% of the initial sample of the borax treated cellulose, compared with 65–70% of the KCl treated cellulose and 80–85% of the untreated cellulose.     

单光源多组分红外在线分析仪设计

基于红外光谱吸收原理,设计了一种单光源单光路的在线分析仪。在实验室环境下,利用SO2进行实验,并对实验结果进行分析。实验结果表明:该分析仪具有很好的准确性、重复性和稳定性,实现了多种气体的在线测量。     

Adhesive Bonding of Oil-Contaminated Steel Substrates

Durability of adhesive bonds formed by curing epoxies against oil-contaminated steel substrates using amidoamine curing agents was determined during exposure to boiling water. The most durable bonds were obtained using amidoamine curing agents with relatively low amine numbers and by blending silane coupling agents such as γ-glycidoxypropyltrimethoxysilane (γ-GPS) and N-(2-aminoethyl)-3-aminopropyltrimethoxy silane (AAMS) into the adhesives. When X-ray photoelectron spectroscopy (XPS) was used to characterize the failure surfaces of the adhesive joints after exposure to boiling water, it was determined that adhesives prepared using amidoamine curing agents with low amine numbers were able to displace the oil from the steel surface but adhesives prepared with amidoamine curing agents with high amine numbers were not. Results obtained from XPS also showed that the amino groups on the substrate fracture surfaces of joints prepared using curing agents with low amine numbers were protonated whereas the amino groups in the bulk adhesive were not, indicating that there was a chemical interaction between the curing agent and the hydrated surface of the substrate. It was also shown using infrared spectroscopy that the amidoamine curing agents formed salts with calcium compounds in the oil.     

TGA analysis of γ‐irradiated linear low‐density polyethylene

Linear low‐density polyethylene (LLDPE), based on butene‐1 or hexene‐1, was irradiated with γ‐rays under vacuum or in the presence of air. The study focused on the influence of the dose rate and the γ‐dose on the thermal properties of LLDPE. Differential scanning calorimetry, thermogravimetric analysis (TGA), and TGA/FTIR techniques were used to address the thermal behavior as a result of γ‐irradiation. During this irradiation, competition between crosslinking and scission reactions, subsequent to oxidation reactions, occurred in the polymeric material, which strongly depends on the experimental conditions. A decrease of the crystallinity for γ‐irradiated samples was observed in particular for samples irradiated under vacuum. This observation may be explained by increased hindrance of segment mobility due to crosslinking reactions that prevent crystal growth. TGA investigations revealed an enhancement of the thermal stability for samples irradiated under vacuum but not for those irradiated in air. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2790–2795, 2006     

Thermooxidative degradation of natural rubber/clay composite

The clay is treated with a reducing agent and an acid so as to obtain a clay containing various metal components with a variable‐valence state. Then, the clay is coprecipitated with natural rubber (NR) latex to prepare a vulcanized NR/clay composite. The degradation process of the NR/clay composite under hot air condition was studied dynamically by using a Fourier transform infrared spectrometer attaching an in situ sample cell and was also investigated using the TGA method. The test result obtained from the infrared spectrometry indicated that under low decomposition temperature, the decomposition products of the test samples mainly are ethylene, low molecular olefinic hydrocarbon, and carbonyl compounds. As the decomposition temperature rises, the low molecular olefinic hydrocarbon content decreases, the olefine with longer chain is formed, and a lot of alkane decomposition products are formed at the same time. When the content of the metal components with a variable‐valence state in clay such as Cu, Mn, Co, and Fe increases, the oxidation products containing the carbonyl group, the olefinic hydrocarbon, and CO₂ in the decomposition product of the test sample also increase. The TGA result clearly shows a shoulder peak that appears by the side of the main peak on the DTG curve of NR/clay composite. With the increase in the content of metal components with variable‐valence state in clay, the initial degradation temperature of the test sample (T₀), the degradation peak temperature (T_p1), and the final degradation temperature (T_f1) in first‐stage reaction, as well as the degradation peak temperature (T_p2) and the last final degradation temperature (T_f) in second‐stage reaction of all the test samples more or less shift to the direction of low temperature; besides, the activation energy (E) of the reaction of the test samples more or less decreases. This means that the metal components with variable‐valence state promote the oxidative degradation of the clay–rubber masterbatch. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3809–3815, 2006     

虚拟场景中有宽度物体移动路径的优化方法

提出一种虚拟场景中有宽度物体移动路径的优化方法,在地图掩码数据经过寻路算法搜索后,得到一组连续路径节点组成的节点集,从起始节点出发,沿着路径节点找出离起始节点最远且没有障碍物遮挡的可见节点,作为下一个起点,循环往复直至节点集的终止节点,并顺序连接这些可见节点,即可得到优化路径。通过合并节点集中的多余节点,使路径更平滑,从而减少物体移动过程中改变方向的次数,解决有宽度物体无法通过狭窄通道后,须重新计算路径的问题,达到了更好的用户体验效果。     

一种基于改进的动态能量管理的无线传感器节点节能技术研究

针对无线传感器节点的结构特点,以动态能量管理技术为出发点,结合实际应用场合,提出了一种改进的动态能量管理节能模式,建立了不同工作模式下的无线传感器节点能耗模型,并对不同工作模式下的能耗进行了量化分析。分析结果表明,改进后的动态能量管理技术能够有效地降低无线传感器的能量损耗。分析结果为下一步无线传感器节点的节能改进设计打下了良好的基础。     

Surface-Enhanced Raman Scattering from Polyimide Model Compounds on Functionalized Metal Surfaces. Part II: Phthalic Anhydride/meta-Aminothiophenol/Silver

The interphase between a polyimide and a metal substrate was modeled by depositing phthalic anhydride (PA) onto a silver substrate pretreated with meta-aminothiophenol (m-ATP) and then curing in a mixture of acetic anhydride and pyridine or triethylamine. Surface-enhanced Raman scattering (SERS) and reflection-absorption infrared spectroscopy (RAIR) were used to determine the molecular structure of the interphase. It was found that m-ATP was adsorbed dissociatively onto silver substrates through the thiol groups. The tilt angle for m-ATP molecules adsorbed on silver substrates was determined using RAIR to be approximately 39°. However, there was no preferred rotational angle of the adsorbed APDS molecules about the molecular axes. When PA was deposited onto m-ATP pretreated silver substrates, anhydride groups of PA reacted with amino groups of m-ATP to form amic acids. When PA/m-ATP/Ag samples were chemically cured in acetic anhydride and pyridine or triethylamine, isoimide was the predominant product regardless of the use of pyridine or triethylamine as catalyst. These results were different from those obtained from PA/APDS/Au systems in which imide was the major product in the presence of triethylamine. These differences in the relative composition of cured products between two model systems were explained by the effect of substituents attached to APDS and m-ATP benzene rings.     

改进的DV-Hop算法在节点定位中的应用研究

基于传统DV-Hop算法的定位技术,通过分析该算法误差产生的主要原因,提出了节点间跳数的修正方法。通过在广播通信中采用双通信频率,将节点间的跳数缩减为0.5 R,减少了平均跳距的误差。通过Matlab软件的实验验证,本算法可以提高节点定位精度和网络通信频率,可进一步提高定位精度,定位结果达到了预期的目的。