工艺空气压缩机组开车过程的思考

通过汽轮机组调速系统伺服马达不复位、主汽门不动作，反推出电磁阀控制线路接线错误，用人为短路压力开关等手段判断出组合油脱扣器活塞卡涩是造成现场延误开车的根本原因，提出完善大机组开车工作票制度、提高人员素质等措施。     

STM tunneling spectroscopy on high Tc superconductors

STM tunneling spectroscopy has been performed on the bulk single crystals of BiSrCaCuO (BSCCO) and the epitaxial thin films of YBaCuO (YBCO) at cryogenic temperatures. The STM images and tunneling spectra observed on the (001) surfaces can be classified into three cases; 1) Atomic image is visible. However, the tunneling spectrum shows semiconducting or smeared superconducting gap structures, depending on the tip-sample distance. 2) Clear atomic image can not be obtained. But, the tunneling spectrum shows flat bottom region with quite low zero bias conductance. 3) Tunneling spectra demonstrate gapless behavior, independent of the tip-sample separation. These observations support the quasi-2D electronic picture in whichs-wave like 2D superconducting layers are coupled with each other through the Josephson effect.     

Boundary Procedures for Summation-by-Parts Operators

Four different methods of imposing boundary conditions for the linear advection-diffusion equation and a linear hyperbolic system are considered. The methods are analyzed using the energy method and the Laplace transform technique. Numerical calculations are done, considering in particular the case when the initial data and boundary data are inconsistent.     

Oxidation of some aliphatic polyols on anodically deposited MnO2

Galvanostatic steady state current potential measurements were carried out for oxidation of a series of aliphatic alcohols having varying number of hydroxyl groups. The anodically deposited layer of MnO₂ on platinum was used as the electrode material. The deposit was characterised by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and electrode potential measurements. The catalytic role of MnO₂ in the electro-oxidation of alcohols was indicated by the chronopotentiograms and the cyclic voltammograms. An analysis of the electrochemical data indicated a catalytic EC mechanism in which Mn (V) is generated electrochemically and consumed chemically in succession. Based on this and the hydrogen bonding interaction between alcoholic hydroxyl groups and MnO₂ layer, a mechanism was proposed which accounts for the variation in the observed electrochemical reaction orders. Tafel behaviour was found to be followed only approximately. Current efficiency of the electrochemical oxidation of polyols was studied. Replacement of platinum by carbon as current collector was found to leave the electrocatalytic activity of the MnO₂ deposit practically unaltered.     

Lyapunov analysis of the approximate motion equations of flexible structures

In this paper, the effectiveness of the approximate motion equations of a flexible structure, obtained by the RitzKantorovich method, is analysed by using Lyapunov functions. The analysis, which is restricted to the case of a single flexible beam for the sake of simplicity, is carried out under the assumption that a partial dissipation is present, affecting only the first degrees of freedom of the system. By means of suitable Lyapunov functions, an overbounding estimate of the quadratic approximation error is determined as a decreasing function of the approximation order. The analysis is completed by considering the two ‘extreme’ cases: the theoretical absence of dissipation and the presence of structural dissipation, affecting all the infinite degrees of freedom.     

共轭高分子三阶非线性光学材料

概述了ｎ－共轭高分子材料的三阶非线性光学性质，着重讨论了化学结构对其光学非线性的影响，说明了ｎ－共轭聚合物的三阶非线性极化率主要取决于共轭主链的结构，侧链取代基的变化对其非线性影响不大，文中展望了共轭高分子材料在集成光学中的应用前景。     

A study of the static and dynamic properties of side-chain liquid crystalline polymers in low molar mass mesogens

The static and dynamic properties of solutions of a side chain polysiloxane liquid crystal polymer have been studied in a cyanobiphenyl nematic host as a function of concentration and temperature. Refractive index measurements were carried out on aligned samples and the data used to determine the macroscopic order parameter, S, using Haller's method. Photon correlation spectroscopy has been used to measure ($\text{k}{}_{22}\text{γ}{}_1$) for the pure nematic solvent and the solutions. From these measurements it appears that the static properties vary slowly and linearly with increasing polymer concentration whilst the dynamic or viscoelastic properties change markedly. This change has been attributed to γ₁, the twist viscosity, and the results have been discussed in terms of the function of the siloxane polymer backbone.     

Design of internal model control based fractional order PID controller

This article presents a design of the internal model control(IMC)based single degree of freedom(SDF) fractional order(FO)PID controller with a desired bandwidth specification for a class of fractional order system(FOS). The drawbacks of the SDF FO-IMC are eliminated with the help of the two-degree of freedom(TDF)FO PID controller. The robust stability and robust performance of the designed controller are analyzed using an example.     

Bicriteria scheduling of a material handling robot in an m-machine cell to minimize the energy consumption of the robot and the cycle time

This study considers a flowshop type production system consisting of m machines. A material handling robot transports the parts between the machines and loads and unloads the machines. We consider the sequencing of the robot moves and determining the speeds of these moves simultaneously. These decisions affect both the robot’s energy consumption and the production speed of the system. In this study, these two objectives are considered simultaneously. We propose a second order cone programming formulation to find Pareto efficient solutions. We also develop a heuristic algorithm that finds a set of approximate Pareto efficient solutions. The conic formulation can find robot schedules for small cells with less number of machines in reasonable computation times. Our heuristic algorithm can generate a large set of approximate Pareto efficient solutions in a very short computational time. Proposed solution approaches help the decision-maker to achieve the best trade-off between the throughput of a cell and the energy efficiency of a material handling robot.