Influences of land use/cover on water quality in the upper and middle reaches of River Njoro, Kenya

Data from 10 sampling sites along the River Njoro are used to examine the contribution of nutrients from upstream land uses draining each of the sampling sites. The data also are used to assess whether both the proportion of land uses and the size of the subwatersheds account for the variability in water quality in the River Njoro watershed. Geographical Information System analysis was used to determine the spatial distribution of land‐cover types and subwatersheds contributing run‐off to the sampling sites in the River Njoro. Standard Digital Elevation Model‐based routines were used to establish the watershed area contributing run‐off to each sampling site. Water and sediment samples were collected for chemical analysis, and the nutrient levels were related to the upstream land‐use types and the size of the subwatersheds. The mid‐stream portion of the River Njoro (near Egerton University) accounts for the highest nutrient contributions. The percentage contribution is magnified by additions from industrial, human settlements and agricultural land uses around the University. There is a significant decrease in nutrient levels downstream, however, indicating natural purification as the river flows through an area of large‐scale farming with intense, well‐preserved riparian and in‐stream vegetation. Steep slopes of the land upstream of Egerton University enhance erosion and nutrient losses from those subwatersheds. Mixed small‐scale agricultural and bare lands contribute over 55% of the phosphorus load to the upper and mid‐reaches of the River Njoro. The size of the subwatershed accounts for about 53% of the variability in the soluble phosphorus in the river. The land‐use subwatershed proportions are important for characterizing and modelling water quality in the River Njoro watershed. Upland land uses are as important as near‐stream land uses. We suggest that conservation of intact riparian corridor along the river and its tributaries contributes significantly to natural purification processes and recovery of the ecological integrity of the River Njoro ecosystem.     

管道完整性管理标准及其支持体系

通过对美国管道完整性管理标准ASME B31.8S和API 1160内容的论述，总结了管道完整性管理标准的3个特点：①管道完整性管理标准是一种过程标准；②管道完整性管理标准提供了一种管道运行管理的模式和理念，反映了当前管道安全管理从单一安全目标发展到优化、增效、提高综合经济效益的多目标趋向；③完整性管理是以管道安全为目标的系统管理体系,管道完整性管理标准是一种体系规范。从管道完整性管理系统的角度，列举了美国管道完整性管理的主要支持性标准、规范和法律文件。最后对国内管道完整性管理研究提出了建议。     

802.1 x协议分析及其应用

本文对802.1x协议体系结构、流程及其工作原理作了分析,然后介绍了基于该协议的各种传统应用,在此基础上对协议的应用作了进一步扩展,将其引入到网关系统的访问控制中,并概要分析了几种网关模式的应用场景,最后把它同其它认证方式作了分析和比较.     

电子认证与授权管理标准体系研究

以国际上在标识、鉴别与授权标准方面已有的工作为基础，提出了我国电子认证与授权管理标准体系框架。     

Structural integrity in electronics

With continuing miniaturisation, increased performance demands and the requirement to remove lead from solder alloys, the challenges to structural integrity and reliability of electronic equipment are substantial and increasing. This paper outlines typical features in electronic equipment of which the structural integrity community may be generally unaware. Potential failure modes in service are described, and the problems of scale and material characteristics are considered. Progress in the application of fracture mechanics to the life prediction of interconnections is reviewed. The limited evidence available suggests that the crack growth resistance of silver‐containing lead‐free solders is superior to that of the traditional Sn‐37Pb under cycle‐controlled conditions but there is no difference when time‐dependent conditions prevail. In several respects, it is contended that the electronics sector is faced with challenges at least equivalent to those encountered in gas turbines and nuclear power generation.     

利用垂直阵列构作Cartesian认证码

利用垂直阵列构作了一类Cartesian认证码,计算了它们的参数,并且在编码规则按等概率分布选取时,成功的模仿攻击和成功的替换攻击概率也被算出。     

网络信息安全技术综述

阐述了网络信息安全的三个组成方面,具体分析了在实际应用中的网络安全技术手段,探讨了国内外研究开发网络信息安全技术的现状、发展趋势及我们所应着重采取的策略.     

Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

基于数字签名方案的口令鉴别方案

本文在广义ＥｌＧａｍａｌ型签名方案上建立了许多口令鉴别方案，并且提出了文［１］的三个改进方案。利用这些方案，计算机系统不仅能监测和控制口令的使用，而且可以抗击许多对口令的伪造攻击。     

Hiding iris data for authentication of digital images using wavelet theory

This paper introduces an efficient approach to protect the ownership by hiding an iris data into digital image for an authentication purpose. It is based on the theory of wavelets. The idea is to secretly embed biometric data (iris print) in the content of the image identifying the owner. The system is based on an empirical analysis of biometric and watermarking technologies, and it is split into several processes. The first process is based on iris image analysis, which aids the generation of the iris code (watermark); the second and the third processes deal with embedding and detecting a watermark; and the last process deals with the authentication. A new metric that measures the objective quality of the image based on the detected watermark bit is introduced, which does not require the original unmarked image for watermark detection. Simulation results show the effectiveness and efficiency of the proposed approach. The text was submitted by the author in English.