Flexible amorphous‐silicon non‐volatile memory

Abstract— The development of a flexible, rewritable, non‐volatile memory (NVM) that is implemented on a standard, low‐temperature a‐Si:H process without additional mask steps is reported. This NVM is a part of a flexible‐display system. Each NVM cell is composed of differentially configured thin‐film‐transistors (TFTs). The cell reads out one of two stable states depending on the relative threshold voltages of the differentially configured TFTs. Information is stored in each cell by increasing the threshold voltage of one differential TFT or the other, utilizing the well‐known electrical‐stress degradation intrinsic to a‐Si:H TFTs. The stored information is retained indefinitely with no applied power. A test array of individually addressable NVM cells has been successfully fabricated and tested on flexible stainless‐steel substrates. Read and write operation, as well as preliminary reliability measurements, are described. The design is readily scalable to large memory arrays.     

Moiré‐reduction methods for integral videography autostereoscopic display with color‐filter LCD

Abstract— Moiré‐reduction methods for integral videography displays are proposed. Integral videography is based on the principles of integral photography and extended real‐time video processing. There are two moiré‐reduction methods that can be used for integral videography displays that have a lens array and a liquid‐crystal display. The first is color moiré, and the second is intensity moiré. To reduce color moiré, an optimized color‐filter layout in the liquid‐crystal display was used. To reduce intensity moiré, a defocusing method was used. Adesign of a viewing area for the integral videography display is also presented. To control the viewing area, the lens pitch and the shape of the integral videography elemental image was changed. A 5‐in. integral videography display was implemented by using the proposed methods, and an integral videography display was evaluated.     

Fabrication of a poly-Si thin-film transistor with storage capacitor

The fabrication process of a low-temperature poly-Si thin-film transistor (TFT) with a storage capacitor was studied. The atmospheric-pressure chemical-vapour deposited SiO₂ protected the buried indium tin oxide (ITO) from reduction by a pure H₂ plasma treatment that was essential for the effective improvement of the poly-Si TFT characteristics. Thus, a storage capacitor with an ITO (picture electrode)-SiO₂-ITO (buried common electrode) structure was successfully fabricated. The poly-Si TFT with a channel width/length W/L ratio of 5 drove a 3 pF storage capacitor in 2 μs, and it showed superior driverability for LCD use. The TFT also had good hold characteristics under illumination for the realization of grey-scale representation.     

支持多模态交互的桌面增强显示系统

传统的显示设备在受限的物理空间内难以向用户呈现大量画面和复杂内容,而AR头戴式显示设备通过将三维的可视化内容悬浮显示在用户眼前,在不占用额外物理空间的条件下可增强真实世界的画面显示,呈现形式更为丰富的内容。设计AR虚拟空间与真实电脑画面虚实融合的桌面增强显示系统。通过基于二维码识别的空间定位技术将真实电脑画面映射至虚拟空间内,实现交互空间的统一,同时构建窗口布局计算模型使得系统可以根据用户自定义参数自动生成窗口并设置其布局。在此基础上,利用蓝牙通信、网络传输、操作系统底层映射和结合视线检测的语音识别等技术支持手势、键鼠和语音的多模态交互方式,设计鼠标移动策略以扩展鼠标在三维空间下的多种操作模式。实验结果表明,与隔空手势交互、鼠标交互等传统交互方式相比,该系统在处理常见电脑任务时平均耗时节省10%~30%,具有较高的交互效率,且在跨窗口连续移动和瞬间跳转时能够正确显示鼠标位置。     

Advanced photospacers with elastic recovery

A new series of photospacers has been prepared with different types of crosslinkers to improve elastic recovery. Afunctional crosslinker with six reactive groups demonstrates the best elastic recovery. As the quantity of crosslinker is increased, the elastic recovery also increases, probably due to an increase in the crosslinking density. The use of ADMS EPS® results in high resolution, good uniformity, and high production yield in the liquid‐crystal‐display (LCD) process. Especially, EPS® improves and solves problems such as viewing angle, crosstalk, and dark spots.     

Utility of stereoscopic displays for indirect-vision driving and robot teleoperation

The effectiveness of an active shutter-glasses stereoscopic display (SD) and a passive polarised SD was evaluated in a live robot-teleoperation task and a simulated indirect-vision driving task in various terrains. Overall, participants completed their tasks significantly faster with the SDs in three-dimensional (3D) mode than with the SDs in the baseline 2D mode. They also navigated more accurately with the SDs in 3D mode. When the effectiveness of the two types of SDs was examined separately, results showed that the active shutter-glasses SD resulted in faster responses and task completion times than the passive polarised SD, though most of the differences failed to reach statistical significance. Perceived workload when interacting with the two SD systems did not differ significantly between the active versus passive display types or between the 3D and 2D modes of operation; however, participants reported more severe discomfort after interacting with the passive polarised SD.     

Non‐planar projection performance evaluation and projector pose optimization

In projector applications, the actual display effect is primarily dependent on two aspects: projector performance parameters (intrinsic properties), and projector placement (extrinsic properties). Many studies have been conducted on the impact of the original resolution, illumination, and contrast ratio on projection performance. However, few studies have focused on the influence of extrinsic properties, including the position and orientation of the projector on the projection effect. In this paper, three projection performance evaluation criteria—projection resolution, resolution difference, and projection distance difference—are proposed in terms of extrinsic properties. Based on these evaluation criteria, a projection performance evaluation function was constructed. Through this function, as well as optimization employing the multi‐start and Monte Carlo methods, projector pose parameters corresponding to optimal projection effects can be obtained. Evaluations demonstrated that the proposed projection performance evaluation criteria could correctly describe the impacts of projector placement on projection effects. Projection systems arranged according to the projector pose optimization methods achieved good performance on screens in difference shapes with different numbers of projectors, where the resolution and display improved with no change of projector hardware parameters. The optimal projector poses calculated using these optimization methods can provide theoretical guidance for practical projector placement.     

Brilliant cosmetic film for ambient displays,with cholesteric liquid crystal

We have successfully developed a cosmetic film with polymerized cholesteric material. The film features a variety of colors by helical pitch gradients, diffusive texture, and arbitrary color patterns. It hides the display when turned off, and transmits display images when turned on. We believe it could change the display in the OFF‐state from the conventional black wall to specially designed decorations. In addition, they can be applied to hidden sensors.     

Fast response fringe‐field switching mode liquid crystal development for shutter glass 3D

A type of fast response time (RT) liquid crystal (LC) was developed to adopt in fringe‐field switching (FFS) mode for shutter glass 3D display device, the average gray to gray level (GTG) RT can reduce from 7.43 ms to 4.48 ms at a refreshing rate of 60 Hz, and the transmittance can increase by 15.4% compared with conventional LC based on the same cell gap. Meanwhile, the correlation among optical efficiency, correlative color temperature (CCT) of module and retardation of LC for FFS mode was studied. Transmittance is proportional to the retardation of LC; however, the CCT is inversely proportional to the retardation. The fast response LC can keep almost the original optical efficiency and CCT.