改进的第三代相干算法及应用

在讨论相干技术发展及三代相干算法优缺点的基础上，介绍了改进的第三代相干算法。应用自行开发的相干软件对多个油气勘探和开发区块的三维地震资料进行处理、分析，对相干时窗长度、相关道数等参数对算法效果的影响及相干体对断层、异常地质体的识别，以及解释方法进行了探讨。应用实例证明，改进的第三代相干算法抗干扰能力强，横向分辨率高，不仅适用于倾斜地层，而且对断层尤其对小断层、异常地质体具有较高的检测能力，是油气勘探和开发的一项有效和实用的技术。     

漫谈钢铁企业用空分装置的流程选择

钢铁企业的氧气厂要深入了解本企业的用氧情况及周边市场的需要，据此确定拟新增空分装置的设计参数，选定最适宜的空分流程。探讨了空分流程选择时要考虑的几个方面。介绍了一种对空分装置的投资和长期运行费用之间进行经济性分析的定量计算公式，并得出了四点结论。     

坨五站中间乳化层快速增长原因及治理方案

胜利采油厂坨五站高含水(95％)原油化学预脱水中，二级沉降罐内油水相之间的中间乳化层增长迅速，引起了一系列问题。现场调查和大量室内测试结果表明，产生这一现象的原因有：油溶性破乳剂WD-1加入点不合理。有2／3的含水原油在通过油水分离器之后才与破乳剂混合；二级沉降罐进油口伸入油相内，油流的冲击达不到中间层；WD-1对坨五站混合原油中的稠油破乳脱水性能欠佳，不能适应坨五站混合原油组成和含水的变化。针对上述各种原因筛选出了性能更好的一种破乳剂1916。根据确定的几种原因采取了相应的措施：将破乳剂加入点改在3个并联油水分离器之前；将二级沉降罐的进油口移到水相内；改用筛选出的破乳剂1916，结果使中间乳化层的增长受到了抑制。图2表4参2。     

Response Selection in Visual Search: The Influence of Response Compatibility of Nontargets.

The authors used visual search tasks in which components of the classic flanker task (B. A. Eriksen & C. W. Eriksen, 1974) were introduced. In several experiments the authors obtained evidence of parallel search for a target among distractor elements. Therefore, 2-stage models of visual search predict no effect of the identity of those distractors. However, clear compatibility effects of the distractors were obtained: Responses were faster when the distractors were compatible with the response than when they were incompatible. These results show that even in parallel search tasks identity information is extracted from the distractors. In addition, alternative interpretations of the results in terms of the occasional identification of a distractor before or after the target was identified could be ruled out. The results showed that flat search slopes obtained in visual search experiments provide no benchmark for preattentive processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

参数设计法在铝电解电容器设计中的应用探讨

论述了参数设计法在铝电解电容器设计开发阶段的应用。文中阐明了铝电解电容器的主要质量特性(损耗因子、电容量)及芯包外径的参数设计原理,并建立了归一化函数作为优选设计方案的判据。实例证明在铝电解电容器的设计过程中应用参数设计法以减小产品质量特性变异是有效的。     

灞河生态治理工程模型试验研究

通过模型试验 ,对位于西安市东郊因采沙使河道破坏严重的灞河河段进行了复现试验和研究 ,并以此为依据 ,通过优化比较为设计部门提供了合理的橡胶坝坝址和坝座高程。在此基础上 ,又对建坝后橡胶坝对上下游冲淤变化的影响进行了试验研究和分析 ,解决了工程设计中的一些关键技术问题     

COM组件接口方法参数的数据类型的选择

论述了在用 Visual C+ +建造 COM组件时 ,如何选择接口方法参数的数据类型的问题。结合客户程序是 ASP应用程序的情景 ,讨论利用 Visual C+ +和 ATL ,如何在组件程序的一端选择相应的数据类型。     

An integrated modelling environment for the embodiment of mechanical systems

The efficient, economical and often elegant transformation from a design schema to an embodied design solution containing real components is essential for the commercial success of a product. More often the ability of the designer to explore an optimum solution is severely frustrated by the analytically intensive and time-consuming aspects of embodying a concept. This paper presents a computer based system-modelling tool that is to be used by designers during the transformation of a concept to an embodied solution particularly to deal with standard components. This environment provides for the representation of conceptual schemas and subsequent embodiment from computer based component selection modules. These selection modules encompass the full range of electronic representations for standard mechanical components. The strategy for representing a mechanical system, its included components and their associated representations is discussed. The process of constructing a system model, specifying the desired performance characteristics and system resolution are also described.