三盐基硫酸铅的生产工艺条件研究

介绍了氧化铅法中硝酸铅法生产三盐基硫酸铅两种生产工艺 ,对氧化铅法中硫酸的加入量、酸度、温度、时间等生产条件进行了研究 ,确定了最佳生产工艺条件 ,并对两种方法进行了简单对比     

0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3的析晶行为及助溶剂法生长

研究了0.91Pb(znl/3Nb2/3)O3-0.09PbTiO3(PZNT91/9,摩尔分数)在不同组分和配比熔盐中的析晶行为及其对晶体生长的影响。发现B2O3,PbF2等助溶剂不利于钙钛矿相的析出;而BaTiO3-PbO复合体系虽然能够促进钙钛矿相析出,但晶体析出量很少;只有适当比例的。PbO助溶剂比较适合于生长具有铁电性的钙钛矿相PZNT91/9单晶。助溶剂法生长的工艺参数为:溶质与PbO助溶剂的摩尔比为l:l,泡料温度1 150-1 200℃,泡料时间10 h,晶体生长时降温速度0.8-2℃/h,当温度降到900℃时停止生长,以50℃/h快速冷却至室温。所得晶体为琥珀色,最大尺寸达φ30 mm×15 mm,其压电系数和机电偶合系数分别为2000 pc/N和0.92。     

A Solder Alloy Filled Z-Axis Conductive Epoxy Adhesive

Epoxy adhesives filled with four different volume fractions of eutectic tin-bismuth solder alloy were prepared and the effect of filler content on the electrical and mechanical properties of these anisotropic electrically conductive adhesives was investigated. The results show that the adhesive containing the lowest amount of the filler alloy had the best combination of conductivity, insulation resistance and shear strength. The DSC-measurements suggested that the filler melts before the cure of the resin begins which allows the filler to wet and bond well to the conductors. This was verified by SEM/EPMA examinations. A temperature cycling test and high humidity, high temperature treatment were conducted on the best composite adhesive. The temperature variation had no effect on conductivity of the joints while humid and hot environment decreased the conductivity.     

Dynamics of fluid circulation in coupled free and heterogeneous porous domains

Fluid flow in coupled free and porous domain, particularly when the porous medium is heterogeneous, is encountered in many hydro-environmental conditions, e.g., leakage from underground pipe, combined groundwater lake-subsurface interactions. One of the most difficult problems in the study of coupled flow behaviour has been the development of a universally applicable modelling scheme for combining the flow regimes. This is because the free/porous interfacial properties (e.g., shear-stress; velocity slip) that govern the coupled flow behaviour are difficult to determine experimentally under hydro-environmental conditions. On the other hand, the implications of various forms of heterogeneity in the porous media properties can be very different on the fluid-flow behaviour. Difficulties may also arise in direct coupling of the model equations that govern the fluid flow in the individual regions (e.g., Navier-Stokes for free-flow region and the Darcy's equation for the porous flow region). Consequently, models of coupled free and porous flow for hydro-environmental conditions are not very well developed at the moment. While there are some indications that fluids in coupled free and porous domains may circulate (i.e., development of flow cells), there is a lack of appropriate 3D analysis on how heterogeneities in porous media may affect such flow patterns. In this paper, we aim to analyse how porous media heterogeneity affects the dynamics of flow circulation in the porous side of a coupled free and porous domain. For this purpose, we analyse flow patterns in several model domains made up of two porous layers with differing permeabilities. The governing model equations are discretised and solved using the standard finite volume method on a staggered cell-centred mesh. The temporal discretisation is done using the explicit method. An in-house graphical user interface (GUI) has been created specifically to aid in the visualisation of otherwise complex flow patterns. The GUI contains many post-processing options and provides a comprehensive tool for the analysis of hydrodynamics and contaminant motion (not discussed in this paper) in coupled free and porous flow domains. This GUI is described in this paper briefly. The effects of altering the aspect ratio (i.e., multi-scale) of the domain on the coupled flow pattern have also been discussed.     

Bi2—xPbxSr2Ca2Cu3Oy系高Tc超导体相变的研究

用DSC研究了高T_e超导体B_(2-r)Pb_rSr_2Ca_2Cu_sO_v(x=0,0.2,0.4,0.6)从室温至600℃范围内的相变。在320℃和440℃附近有二个吸热蜂,每一个峰对应一个相变过程。440℃附近的相变是不可递的,其原子激活能为1.37eV,是由高T_e相向低T_e相的转变。而320℃附近的相变则与超结构的形成有关。     

交流示波极谱滴定法测定电镀液中的微量铅

提出了用交流示波极谱法测定电镀液中的微量铅，并研究了各项试验条件。铅在0．100～10.0mg／mL范围内，标准偏差在0．200％～0．220%之间，相对标准偏差为4．29‰～4．73‰。该法可用于硫酸盐镀锌技术的电镀液中微量铅的分析测定，其加标回收率在98．0％～103％之间，操作简便，测定快速，分析可靠。     

Augment low-field intra-operative MRI with preoperative MRI using a hybrid non-rigid registration method

Background

Preoperatively acquired diffusion tensor image (DTI) and blood oxygen level dependent (BOLD) have been proved to be effective in providing more anatomical and functional information; however, the brain deformation induced by brain shift and tumor resection severely impairs the correspondence between the image space and the patient space in image-guided neurosurgery.

Method

To address the brain deformation, we developed a hybrid non-rigid registration method to register high-field preoperative MRI with low-field intra-operative MRI in order to recover the deformation induced by brain shift and tumor resection. The registered DTI and BOLD are fused with low-field intra-operative MRI for image-guided neurosurgery.

Results

The proposed hybrid registration method was evaluated by comparing the landmarks predicted by the hybrid registration method with the landmarks identified in the low-field intra-operative MRI for 10 patients. The prediction error of the hybrid method is 1.92 ± 0.54 mm, and the compensation accuracy is 74.3 ± 5.0%. Compared to the landmarks far from the resection region, those near the resection region demonstrated a higher compensation accuracy (P-value = .003) although these landmarks had larger initial displacements.

Conclusions

The proposed hybrid registration method is able to bring preoperatively acquired BOLD and DTI into the operating room and compensate for the deformation to augment low-field intra-operative MRI with rich anatomical and functional information.     

Fabrication of NiO Nanoparticle-Coated Lead Zirconate Titanate Powders by the Heterogeneous Precipitation Method

NiO nanoparticle-coated lead zirconate titanate (PZT) powders are successfully fabricated by the heterogeneous precipitation method using PZT, Ni(NO₃)₂·6H₂O, and NH₄HCO₃ as the starting materials. The amorphous NiCO₃·2Ni(OH)₂·2H₂O are uniformly coated on the surface of PZT particles. XRD analysis and the selected-area diffraction (SAD) pattern indicate that the amorphous coating layer is crystallized to NiO after being calcined at 400°C for 2 h. TEM images show that the NiO particles of ∼8 nm are spherical and weakly agglomerated. The thickness of the nanocrystalline NiO coating layer on the surface of PZT particle is ∼30 nm.     

分析用水对陶瓷铅溶出量测定的影响

分析用水水质对日用陶瓷铅溶出量测定具有重要影响,CL-、SO42-、CO2等严重抑制铅的溶出,使测定结果偏低。     

基于海量搜索历史数据的用户兴趣模型

针对互联网搜索引擎环境中,基于海量搜索历史数据分析用户兴趣的问题,提出一种改进的用户兴趣模型。该模型根据用户搜索的历史数据,结合向量空间模型（ VSM ）和TF-IDF算法,递归地回溯出用户兴趣权重列表。为解决用户兴趣变化和时间性能的问题,该模型引入时间遗忘机制进行动态更新,并在Hadoop分布式系统架构下利用MapReduce分布式编程模型进行实现。实验结果表明,改进的用户兴趣模型的查准率和召回率都能达到50',具有较好的可行性和可用性。