Nitric oxide reduction and carbon monoxide oxidation over carbon-supported copper-chromium catalysts

Carbon supported copper-chromium catalysts are shown to be very active for both the reduction of nitric oxide with carbon monoxide and the oxidation of carbon monoxide with oxygen. Mixed copper-chromium oxide active phases have good activity in the simultaneous removal of nitric oxide and carbon monoxide from exhaust gases. The influence of several catalyst variables has been investigated. The activity per volume of catalyst increases with increasing loading, while the intrinsic activity shows a maximum around C/M=100−50. An optimum catalyst for nitric oxide reduction and carbon monoxide oxidation has a copper/chromium ratio of 2/1. The apparent activation energy for the carbon monoxide oxidation over carbon supported copper-chromium catalysts is 77 kJ/mol, suggesting that the Cu---O bond rupture is the rate-limiting process. The reduction of nitric oxide takes place at higher temperatures. Since all catalysts have a low selectivity for molecular nitrogen formation at lower temperatures, the dissociation of nitric oxide is probably rate determining, resulting in a slightly reduced catalyst system. In an excess of carbon monoxide the reaction is first-order in nitric oxide and zero-order in carbon monoxide. Moisture inhibits the reaction by reversible competitive adsorption, whereas carbon dioxide does not. Oxygen completely inhibits the reduction of nitric oxide due to the more rapid reoxidation of the catalytic sites compared to nitric oxide. Therefore, the reduction of nitric oxide takes place only when all oxygen has been converted and, hence, is shifted to higher temperatures. As a possible consequence, the production of nitrous oxide is reduced. Nitric oxide and molecular oxygen react preferentially with carbon monoxide, so, in an excess of oxidizing component, gasification of the carbon support occurs at higher temperatures after carbon monoxide has been completely consumed.     

无油润滑压缩机活塞环和支承环设计

通过对填充聚四氟乙烯材料活塞环及带卸荷槽结构支承环的研究 ,确定了活塞及活塞环结构 ,建立了带卸荷槽支承环的力学分析模型 ,并将其结果用于结构尺寸的确定。在压缩机工艺指标不变的情况下 ,用该方法设计的活塞环和支承环性能优良。     

引进意大利连续纺丝机车间空调节能设计

介绍了某化纤厂引进意大利十二台粘胶连续纺丝机车间与以往的纺丝车间相比,空调设计中的节能途径,体现了既满足工艺要求,又降低生产成本的设计目的。     

深基坑支护结构计算的有限元方法

针对软土地基的特性，本文提出了考虑土体抗力释放与结构模型随施工过程改变的新杆系有限元法，并 编制了求解支护结构内力与变形的计算程序，通过对事例分析．计算结果与实际情况非常吻合，证明了该方法的合理 性。     

Information systems and uncertainty: a conspiracy of misplaced confidence

Abstract. Information technology is becoming an increasingly important factor in contemporary management. Information systems are being set up in business explicitly to accommodate the new opportunities of this technology, and these are having a lasting effect on managerial practice. The full implications of this technology-driven development have not been appreciated by organizations, which in absorbing technological systems, are tolerating a great drain on their resources.
The efficacy of computers is predicated on the acceptance of some very specific perspectives. A growing discontent and disappointment with their limited achievements is our reason for advocating a different point of view. We will discuss how a shift in perspective, particularly in respect to the perception of uncertainty, will affect thinking and practice in the field of management support systems. We will render our view of the application of computerized decision support systems (DSS), and especially, we will focus on the beliefs and assumptions that have shaped this technology thus far. To this end we will discuss the concept of uncertainty, by juxtaposing current thinking and practice with our understanding of the context of its application. Finally, we will place our understanding of uncertainty in a managerial context and explain the implications this would have for strategists.     

Pruning Redundant Alarm Correlation Patterns

1　ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｓｔｉｃｋｉｎｇｐｏｉｎｔｏｆａｓｓｏｃｉａｔｉｏｎｒｕｌｅａｌｇｏｒｉｔｈｍｓｄｅｐｅｎｄｓｏｎｅｆｆｅｃｔｉｖｅｌｙｆｉｎｄｉｎｇａｌｌｃｏｒｒｅｌａｔｉｏｎｐａｔｔｅｒｎｓｔｈａｔｓａｔｉｓｆｙｖａｌｕｅｒｅｑｕｉｒｅｍｅｎｔｉｎｔｈｅｍａｇｎａｎｉｍｉｔｙｏｆｄａｔａ.Ｂｕｔｔｈｅａｌｇｏｒｉｔｈｍｓａｌｓｏｂｒｉｎｇａｎｅｇａｔｉｖｅｅｆ ｆｅｃｔ:ｔｈｅｎｕｍｂｅｒｏｆａｓｓｏｃｉａｔｉｏｎｒｕｌｅｓｉｓｖｅｒｙｌａｒｇｅ.Ａｌｓｏｉｎｆｏｒｍａｔｉｏｎ…     

化工软测量技术研究进展

详细说明了软测量技术的含义以及软测量系统的组成。在此基础上，介绍了软测量技术中基于机理分析建模、应用状态观测器建模、应用统计分析建模、神经元网络、模糊技术、以及支持向量机的智能建模等软测量建模理论方法和最新研究成果，之后介绍了小波分析、推断控制算法在软测量数据处理中的应用，最后介绍了基于虚拟仪器开发平台的软测量系统实现技术。     

Immobilization and activation of vanadium(III) and titanium(III) single‐site catalysts for ethylene polymerization using MgCl2‐based supports

Significant increases in the activity of vanadium(III) amidinate catalysts for ethylene polymerization have been obtained by immobilization on a MgCl₂‐based support prepared by reaction of AlEt₃ with a MgCl₂/ethanol adduct. Catalyst immobilization and activation on this type of support prevents the rapid decay in activity observed under homogeneous polymerization conditions with unsupported catalysts. Stable polymerization activity is also observed with analogous titanium(III) complexes. Polyethylene with narrow molecular weight distribution and spherical particle morphology is obtained without reactor fouling. Copyright © 2005 Society of Chemical Industry     

Semiparametric Estimation in Time‐Series Regression with Long‐Range Dependence

Abstract. We consider semiparametric estimation in time‐series regression in the presence of long‐range dependence in both the errors and the stochastic regressors. A central limit theorem is established for a class of semiparametric frequency domain‐weighted least squares estimates, which includes both narrow‐band ordinary least squares and narrow‐band generalized least squares as special cases. The estimates are semiparametric in the sense that focus is on the neighbourhood of the origin, and only periodogram ordinates in a degenerating band around the origin are used. This setting differs from earlier studies on time‐series regression with long‐range dependence, where a fully parametric approach has been employed. The generalized least squares estimate is infeasible when the degree of long‐range dependence is unknown and must be estimated in an initial step. In that case, we show that a feasible estimate which has the same asymptotic properties as the infeasible estimate, exists. By Monte Carlo simulation, we evaluate the finite‐sample performance of the generalized least squares estimate and the feasible estimate.     

The Effect of the Estimation on Goodness‐of‐Fit Tests in Time Series Models

Abstract. We analyze, by simulation, the finite‐sample properties of goodness‐of‐fit tests based on residual autocorrelation coefficients (simple and partial) obtained using different estimators frequently used in the analysis of autoregressive moving‐average time‐series models. The estimators considered are unconditional least squares, maximum likelihood and conditional least squares. The results suggest that although the tests based on these estimators are asymptotically equivalent for particular models and parameter values, their sampling properties for samples of the size commonly found in economic applications can differ substantially, because of differences in both finite‐sample estimation efficiencies and residual regeneration methods.