延迟焦化装置水力除焦的电气设计

介绍了延迟焦化装置中水力除焦部分电气设计的体会，如变频调速、联锁系统、联络系统等的设计思路。     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

Modeling and global trajectory tracking control for an over-actuated MAV

This paper deals with an original micro aerial vehicle (MAV) design, the Omnicopter MAV. It has two central coaxial rotors with fixed-pitch propellers and three perimeter mounted ducted fans with servo motors performing thrust vectoring. Compared with traditional rotary wing MAVs that have inherent underactuation, the Omnicopter possesses some advantages in mobility, for example, lateral translation with zero attitude and hover with nonzero attitude. The trajectory tracking control design, global stability analysis, and control allocation are demonstrated through numerical simulation. The advantage of zero attitude translation is illustrated through experimental results.     

Brain mass estimation by head circumference and body mass methods in neonatal glycaemic modelling and control

Introduction

Hyperglycaemia is a common complication of stress and prematurity in extremely low-birth-weight infants. Model-based insulin therapy protocols have the ability to safely improve glycaemic control for this group. Estimating non-insulin-mediated brain glucose uptake by the central nervous system in these models is typically done using population-based body weight models, which may not be ideal.

Method

A head circumference-based model that separately treats small-for-gestational-age (SGA) and appropriate-for-gestational-age (AGA) infants is compared to a body weight model in a retrospective analysis of 48 patients with a median birth weight of 750 g and median gestational age of 25 weeks. Estimated brain mass, model-based insulin sensitivity (S_I) profiles, and projected glycaemic control outcomes are investigated. SGA infants (5) are also analyzed as a separate cohort.

Results

Across the entire cohort, estimated brain mass deviated by a median 10% between models, with a per-patient median difference in S_I of 3.5%. For the SGA group, brain mass deviation was 42%, and per-patient S_I deviation 13.7%. In virtual trials, 87–93% of recommended insulin rates were equal or slightly reduced (Δ < 0.16 mU/h) under the head circumference method, while glycaemic control outcomes showed little change.

Conclusion

The results suggest that body weight methods are not as accurate as head circumference methods. Head circumference-based estimates may offer improved modelling accuracy and a small reduction in insulin administration, particularly for SGA infants.     

基于磁流变阻尼器的车辆悬架系统模糊半主动控制

在对磁流变液和磁流变阻尼器的研究基础上 ,以磁流变阻尼器作为半主动控制元件组成模糊半主动悬架系统。运用数值仿真和试验研究等方法对基于磁流变阻尼器的模糊半主动悬架进行了研究。数值仿真和试验结果表明 ,设计的模糊半主动控制算法可对基于磁流变阻尼器的半主动控制悬架实现有效的控制     

Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model

This paper is the first one of the two papers entitled “modeling and solving mixed-model assembly line balancing problem with setups”, which has the aim of developing the mathematical programming formulation of the problem and solving it with a hybrid meta-heuristic approach. In this current part, a mixed-integer linear mathematical programming (MILP) model for mixed-model assembly line balancing problem with setups is developed. The proposed MILP model considers some particular features of the real world problems such as parallel workstations, zoning constraints, and sequence dependent setup times between tasks, which is an actual framework in assembly line balancing problems. The main endeavor of Part-I is to formulate the sequence dependent setup times between tasks in type-I mixed-model assembly line balancing problem. The proposed model considers the setups between the tasks of the same model and the setups because of the model switches in any workstation. The capability of our MILP is tested through a set of computational experiments. Part-II tackles the problem with a multiple colony hybrid bees algorithm. A set of computational experiments is also carried out for the proposed approach in Part-II.     

窑尾废气处理系统"双风机"与"三风机"技术方案的浅析

摘要：理系统主要分为双风机系统与三风机系统。以5000t／d熟料生产线为例，详细介绍了双风机系统和三风机系统的工艺流程、风机配置；分别介绍了系统的风机配置情况：从工艺布置、生产操作、设备运行、投资大小及运行电耗等多角度，重点进行二种系统的对比分析。在此介绍-分析-对比的基础，作者对原料粉磨和废气处理系统提出了几点看法。     

格灵化工基于SmartPro的DCS系统设计与应用

介绍北京和利时公司开发的SmartPro MACS Ⅲ型DCS系统在格灵化工硫酸装置中的应用.DCS系统包括硬件组成、软件设计及控制功能实现.该控制系统稳定可靠、控制精度高.在提高生产装置自动化水平的同时,使硫酸产品质量提高,生产成本大幅度降低.     

智能化结构分析建模方法

建立正确的模型是进行机械结构分析的关键技术之一。提出了一种基于知识的结构分析建模方法,给出了基于知识结构分析建模方法的总体结构,讨论了知识的获取、分类与表达,提出了推理机制以及智能求解策略,提高了结构有限元分析建模方法的实用性和有效性。最后用实例说明了应用效果。     

氯气干燥系统的技术改造

介绍了引起氯气干燥系统设备管道漏裂、堵塞、腐蚀的原因及其危害性,提出了包括设定合理的工艺参数,严格执行操作规程及改造更新设备管路等解决措施。