平面波垂直入射浸渍吸收剂蜂窝的反射特性

提出一个数值方法,计算当平面波垂直于蜂窝板入射时浸渍吸收剂的蜂窝的反射系数。在引入蜂窝壁表面阻抗后,借助于周期格林函数对无限大蜂窝表面建立了电场积分方程,用矩量法求解未知的表面电流。在8~12 GHz频段内,得到的不同蜂窝高度、不同吸收剂和不同浸渍厚度的数值结果表明,所提出的方法是高效的,可用于蜂窝制备和吸波结构的工作中。     

等截面塔设备风弯矩的积分求法

由于风压高度变化系数和风压脉动系数沿塔高连续变化，因此，可利用积分求解方法得出等截面塔设备风弯矩计算公式。该公式便于计算机编程，简化了塔设备的强度设计，并且能够验证传统计算方法的结果。     

高层建筑扭转风向动力风荷载数学模型

针对矩形截面的高层建筑物，对不同高宽比和边长比的9种模型进行风洞实验，通过对大量数据的处理和分析，考察了模型高度、高宽比、边长比对高层建筑物扭转风向风力功率谱(扭矩功率谱)的影响规律，并拟合出了一个以风速、湍流强度、边长比等为参数的高层建筑物扭矩功率谱密度函数的数学表达式，与试验结果吻合较好，证明它是合理有效的。     

应用载流线圈的费曼模型再谈非均匀磁场对载流线圈的作用

应用载流线圈的费曼模型推导了任意载流线圈在非均匀磁场中所受作用力及力矩的公式.     

塔式起重机安全装置试验方法的研究

针对塔式起重机安全装置精度低、灵敏度低、可靠性差的问题 ,采用有限元分析软件对力矩限制器几个常用的安装位置进行分析 ,建立应变—起重力矩曲线 ,并借助于塔机整机性能试验台测试应变以确定力矩限制器最佳安装位置 ;测试起重量和工作幅度以获得塔机实际起重力矩曲线 ,通过与理论力矩曲线比较 ,对力矩限制器精度进行标定。     

Robust estimation of continuous nonlinear plants with discrete measurements

In this work the problem of designing a state estimator for completely or partially observable continuous nonlinear plants with discrete measurements is addressed. The combination of a geometric approach with a stability analysis yields an estimator design methodology with a nonlinear detectability condition susceptible of testing, a systematic estimator construction, a robust convergence criterion coupled with a simple tuning scheme, as well as a rationale to explain the interplay between sampling time, estimator gains, and estimator functioning. Comparing with the continuous measurement case where the convergence is attained by tuning the gain above a low limit, in the discrete measurement case the loss of information due to the measurement sampling increases the size of the lower gain limit, and imposes sampling time and high gain limits. The proposed methodology is applied to address the estimation problem of a class of solution homopolymerization reactors, and is tested with a methyl-methacrylate polymerization run taken from a previous extended Kalman filter implementation study with experimental data.     

Comparative analysis of different approaches to target differentiation and localization with sonar

This study compares the performances of different methods for the differentiation and localization of commonly encountered features in indoor environments. Differentiation of such features is of interest for intelligent systems in a variety of applications such as system control based on acoustic signal detection and identification, map building, navigation, obstacle avoidance, and target tracking. Different representations of amplitude and time-of-flight measurement patterns experimentally acquired from a real sonar system are processed. The approaches compared in this study include the target differentiation algorithm, Dempster-Shafer evidential reasoning, different kinds of voting schemes, statistical pattern recognition techniques (k-nearest neighbor classifier, kernel estimator, parameterized density estimator, linear discriminant analysis, and fuzzy c-means clustering algorithm), and artificial neural networks. The neural networks are trained with different input signal representations obtained using pre-processing techniques such as discrete ordinary and fractional Fourier, Hartley and wavelet transforms, and Kohonen's self-organizing feature map. The use of neural networks trained with the back-propagation algorithm, usually with fractional Fourier transform or wavelet pre-processing results in near perfect differentiation, around 85% correct range estimation and around 95% correct azimuth estimation, which would be satisfactory in a wide range of applications.     

Improved estimation of defocus blur and spatial shifts in spatial domain: a homotopy-based approach

This paper presents a homotopy-based algorithm for the recovery of depth cues in the spatial domain. The algorithm specifically deals with defocus blur and spatial shifts, that is 2D motion, stereo disparities and/or zooming disparities. These cues are estimated from two images of the same scene acquired by a camera evolving in time and/or space. We show that they can be simultaneously computed by resolving a system of equations using a homotopy method. The proposed algorithm is tested using synthetic and real images. The results confirm that the use of a homotopy method leads to a dense and accurate estimation of depth cues. This approach has been integrated into an application for relief estimation from remotely sensed images.     

力矩分配法计算超静定结构成果校核方法研究

文章对力矩分配法计算超静定结构的成果校核方法作了探讨与研究，确保最后结果弯矩的正确性。     

钢筋混凝土板设计取值分析

在钢筋混凝土板的设计中如何合理地确定板厚和截面配筋面积的相对值是很有工程意义的问题,本文对钢筋混凝土板满足设计要求的相对板厚和相对配筋面积进行了详细分析,指出了板的长宽比例对计算结果的影响,并给出了实用的比现行习惯做法精确的设计方法。