上海中心大厦塔冠外露钢结构防腐涂装体系的研究与实践

上海中心大厦塔冠是国内房屋建筑史上第一次达到600 m以上高度的塔顶建筑,由于其结构复杂、关联设备众多、环境条件严酷、施工难度大,常规的钢结构防腐经验难以适用。通过对塔冠自然条件和施工条件的深入分析,陈述了原方案的否定、调整和再否定,并在大量工程调研的基础上,提出了新的长效防腐体系。通过试验检验,结合严格的工艺质量控制,使这一新的组合配套防腐体系在大厦塔冠钢结构防腐实践中得到落实应用。     

Use of slow filtration columns to assess oxygen respiration, consumption of dissolved organic carbon, nitrogen transformations, and microbial parameters in hyporheic sediments

Biogeochemical processes mediated by microorganisms in river sediments (hyporheic sediments) play a key role in river metabolism. Because biogeochemical reactions in the hyporheic zone are often limited to the top few decimetres of sediments below the water-sediment interface, slow filtration columns were used in the present study to quantify biogeochemical processes (uptakes of O2, DOC, and nitrate) and the associated microbial compartment (biomass, respiratory activity, and hydrolytic activity) at a centimetre scale in heterogeneous (gravel and sand) sediments. The results indicated that slow filtration columns recreated properly the aerobic-anaerobic gradient classically observed in the hyporheic zone. O2 and NO3- consumptions (256 +/- 13 microg of O2 per hour and 14.6 +/- 6.1 microg of N-NO3- per hour) measured in columns were in the range of values measured in different river sediments. Slow filtration columns also reproduced the high heterogeneity of the hyporheic zone with the presence of anaerobic pockets in sediments where denitrification and fermentation processes occurred. The respiratory and hydrolytic activities of bacteria were strongly linked with the O2 consumption in the experimental system, highlighting the dominance of aerobic processes in our river sediments. In comparison with these activities, the bacterial biomass (protein content) integrated both aerobic and anaerobic processes and could be used as a global microbial indicator in our system. Finally, slow filtration columns are an appropriate tool to quantify in situ rates of biogeochemical processes and to determine the relationship between the microbial compartment and the physico-chemical environment in coarse river sediments.     

Machining of NiTi-shape memory alloys-A review

The emerging trends in the development of advanced smart materials with better unique properties under different environments for a particular application fascinate the researchers and industrialists. Nickel-Titanium based shape memory alloys are exotic materials due to their unique properties such as SME, SE, high damping characteristics, high corrosion and wear resistance and biocompatibility. This article presents an overview of machining processes that can be used to machine the NiTi and its surface induced characteristics such as microhardness, surface roughness, topography, induced layer, residual stress, fatigue and phase transformation. The surface integrity characteristics are discussed for machining of NiTi-SMAs under the category of traditional, non-traditional and micro-machining with the effect of input parameters such as cutting speed, feed, depth of cut, type of lubricant and type of coating material on cutting tool. The conventional machining of NiTi alloys are quite complicated due to high toughness, severe strain hardening, fatigue hardening and distinctive property of NiTi-SMAs such as pseudoelastic and shape memory effect. From this study, non-traditional process is significantly used to machine the NiTi-SMAs due to its better results on surface integrity characteristics. Consequently, future trends are also identified for machining the NiTi-SMAs and to improve the surface integrity characteristics.     

薄煤层开采技术的探索与实践

煤矿中厚煤层经长期开采已近枯竭,薄煤层的开采凸显重要,以云驾岭煤矿薄煤开采初次探索为例,分析了目前薄煤层开采主要机械化设备的技术特点,指出了薄煤层开采的发展趋势,延长矿井服务年限和实现高效开采都具有可行性。     

Dynamic Reductive Kinetic Resolution of Benzyl Ketones using Alcohol Dehydrogenases and Anion Exchange Resins

Dynamic reductive kinetic resolutions of racemic 3‐arylalkanones have been performed by the proper combination of an alcohol dehydrogenase and a basic anionic resin. The best results were found for the bioreduction with the alcohol dehydrogenase type A from Rhodococcus ruber DSM 44541 overexpressed in Escherichia coli (E. coli/ADH‐A) and the commercially available evo‐1.1.200, while the Amberlite IRA‐440 C and the DOWEX‐MWA‐1 resins allowed efficient in situ racemizations. Reaction conditions were optimized in terms of enzyme source and loading, type and amount of resin, pH, temperature and reaction times, obtaining a series of (R,R)‐substituted propan‐2‐ols with good conversions and both diastereoselectivity and stereoselectivity. As a proof of concept, the subsequent intramolecular cyclization of a selected propan‐2‐ol substrate afforded a valuable isochroman heterocycle without any loss of the optical purity.

     

Oxidation of graphene-modified HfB2-SiC ceramics by supersonic dissociated air flow

The oxidation resistance of ultra-high-temperature ceramic material (HfB₂-30 vol%SiC)-2 vol%rGO (rGO: reduced graphene oxide) under long-term exposure (2000s) to a supersonic air flow has been studied. The ceramics were obtained by reactive hot pressing of HfB₂-(SiO₂-C)-rGO composite powder at a temperature of 1800°C (pressure 30 MPa, holding time 15 min, Ar). The surface temperature of graphene-modified ceramics under the influence of heating by high-enthalpy air flow (heat flow q reached 779 W·cm^–2) did not exceed 1700°C, which is 650–700°C less than for the HfB₂-30 vol%SiC baseline ceramics. This may be related to an increase in the efficiency of heat transfer from the sample to the water-cooled module, due to the higher thermal conductivity of the rGO-containing material. Thereby, a decrease in the material degradation degree has been noted, i.e. decrease in the recession rate and decrease in the total thickness of the oxidised ceramic layer by tenth. The peculiarities of the oxidised surface and near-surface region microstructure upon aerodynamic heating of the graphene-modified ceramic material, have been shown.     

C60-卤代苯吡咯烷的合成及光谱表征

合成了一种新的C60-卤代苯吡咯烷衍生物1,以1HNMR、13CNMR、FT-IR、FAB-MS和UV进行了结构表征.测量其在甲苯溶液中的荧光发射光谱,并在此最大发射波长下测得其荧光寿命为5.26ns,而C60在室温的荧光寿命大约是1.2ns。说明C60-卤代苯吡咯烷(1)在激光激发下发生了加成基团苯环与母体C60之间的分子内能量转移和电荷传递,有可能产生长寿命的电荷分离态。理论计算化合物1的电子结构和前线轨道进一步验证了上述结果。     

顶板定向长钻孔“以孔代巷”抽采瓦斯技术研究

为探究行之有效的“以孔代巷”瓦斯抽采技术,解决端氏煤矿高抽巷工程量大、经济成本高等问题,提出顶板定向长钻孔替代高抽巷治理采空区瓦斯模式。采用FLAC^3D数值模拟确定3号煤层顶板以上15～45 m为最佳抽采层位,并基于定向钻进轨迹控制技术,在端氏煤矿3019工作面进行成孔试验。结果表明：钻进轨迹能够按照预设参数实施,成孔直径达153 mm,一次成孔深度420 m以上,钻孔进入稳定抽采阶段的平均抽采瓦斯浓度达18%、平均抽采瓦斯纯流量达8.7 m³/min,钻孔抽采条件下工作面瓦斯抽采率达36.7%,工作面上隅角瓦斯浓度控制在0.50%以下,解决了瓦斯超限问题。与高抽巷抽采技术相比,顶板定向长钻孔成本降低62.5%、施工工期缩短50%,验证了“以孔代巷”的合理性和可行性。     

槲皮素对高脂日粮小鼠学习记忆能力的影响研究

探讨槲皮素对高脂日粮小鼠学习记忆的影响及可能机制。4周龄C57B/L雌性小鼠45只,随机分为三组:对照组（基础日粮）,高脂组（约20%脂肪）,槲皮素组（高脂日粮+0.01%槲皮素）。第26周进行Morris水迷宫实验,实验结束后取小鼠大脑皮层和海马组织测定氧化应激指标,荧光定量PCR检测海马组织中脑源性神经营养因子（BDNF）、核转录因子Nrf2及血红素单加氧酶（HO-1）的基因表达。结果显示,高脂组小鼠学习记忆能力显著下降,脑组织出现明显的氧化应激,Nrf2、HO-1和BDNF基因表达显著下调;槲皮素干预后,大脑氧化应激程度减轻,Nrf2、HO-1和BDNF基因表达上调,学习记忆能力得到显著改善。槲皮素改善高脂日粮小鼠学习记忆,可能与上调Nrf2/HO-1通路及BDNF的基因表达有关。