Invariant‐set‐based fault diagnosis in Lure systems

In this paper, we present an invariant‐set‐based method for actuator and sensor fault detection and isolation in Lure systems. The Lure plant is controlled by an observer‐based feedback tracking controller, designed for the nominal (fault‐free) system. Suitable residual signals are constructed from measurable system outputs and estimates associated with the nominal observer. Faults are diagnosed by online contrasting the residual signal trajectories against sets of values that the residuals are shown to attain under healthy or faulty operation. These values are obtained via set‐invariance analysis of the system closed‐loop trajectories. Copyright © 2013 John Wiley & Sons, Ltd.     

一种改进的VI CFAR检测器

为得到不同杂波背景下的良好检测性能,给出了一种改进的VI CFAR检测器.该检测器主要利用均值类可变性指示（MLVI）CFAR检测器和有序统计类可变性指示（OSVI）CFAR检测器的各自优点以及VI CFAR的以背景均匀程度自动选择不同检测器思想.理论分析和仿真结果表明：该检测器在均匀背景下性能基本与MLVI CFAR重合;多目标背景下具有较强的抗多目标能力;杂波边缘背景下有较好的虚警概率控制能力且运算量小,是一种稳健的检测器.     

Cycling hardening and serration yielding of Fe-Ni-Cr alloy at high temperature under out-phase TMF

Behaviour of hardening and serration yield of a Fe-Ni-Cr alloy under isothermal cycling (ISC) and out-phase TMF was studied on the basis of varied hysteresis loops. Cycling hardening and serrated yielding for ISC depend on the temperature and the total strain range, stronger hardening with serrated yielding at higher strain range under ISC at 600 °C, but no hardening and serrated yielding occurred under ISC at 800 °C. Stronger hardening with stress serration occurred at the thermal path going to the lowest temperature, no stress serration occurred at the highest temperature under the out-phase. The hardening also depends on the total strain range, higher total strain range with lower cycling temperature resulted in a stronger hardening and remarkable serration yielding behavior. Weaker hardening without serrated yielding occurred at near 800 °C may due to an obvious cycling stress drop under out-phase TMF. Change in the shape of the hysteresis loops also expresses the degree of the damage of the tested alloy under out-phase and ISC.     

油气管道堵塞检测及定位技术研究

针对油气输送管道中的堵塞现象,提出利用管道堵塞前后两端压差的剧烈变化,以及利用管道两端压力的模拟值与实际测量值的差异来检测管道的堵塞,提出通过检测管道水力坡降曲线奇异点的方法确定油气管道的堵塞位置的原理和方法,通过采集管道两端运行参数,并建立管道运行的数学模型,对管道实施仿真,获得整条管线的水力坡降曲线,再应用小波变换对管道的水力坡降曲线进行奇异性检测,而管道水力坡降曲线的奇异点将对应管道的堵塞位置.该方法具有所需设备少,操作费用低,操作简单等优点,优于现有管道堵塞位置确定方法.     

新型钢铅组合耗能器性能试验及参数优选

为了考察新型钢铅组合耗能器(NCSLD)的力学性能和提高其耗能能力,利用电液伺服压剪试验机对NCSLD耗能器进行力学性能试验,采用ANSYS实体建模的方法对耗能器进行大量的数值分析,并对性能试验和数值分析的结果进行对比,研究耗能器的滞回特征参数与其6个几何参数之间的关系,回归出二者之间的公式.提出评价耗能器性能优劣的标准及其附加条件,并以此标准为依据,利用均匀设计法和遗传算法分别对耗能器的6个几何参数进行优选.结果表明遗传算法的选优效果要好于均匀设计法,同时得到一系列性能良好的NCSLD耗能器.     

基于红外原理的微型多气体检测系统的设计

为了解决目前煤矿瓦斯事故以及大量使用天然气的家庭安全、环境污染等问题,设计并开发了一种具有集成化、微型化的红外多气体检测系统,通过实验数据的测试对比和数据分析,这种系统达到了微功耗、微体积、宽量程、高分辨率等技术要求,且能集成多气体检测的微型检测系统.重点介绍了红外检测的光学原理,以及从单气体检测引入到集成多气体检测的设计思想和方法,并介绍了有关CAN总线的数据传输方式和无线数据通信方式在系统中的应用.     

Damage and deterioration mechanism and curing technique of concrete structure in main coal cleaning plants

Concrete structures in main coal cleaning plants have been rebuilt and reinforced in the coal mines of the Shanghai Da-tun Energy Sources Co. Ltd., the first colliery of the Pingdingshan Coal Co. Ltd. and the Sanhejian mine of the Xuzhou Mining Group Co. Ltd. In these projects, the operating environment and reliability of concrete structures in the main plants of the three companies were investigated and the safety of the structures inspected. Qualitative and quantitative analyses were made on the spe-cial natural, technological and mechanical environments around the structures. On the basis of these analyses, we discuss the long-term, combined actions of the harsh natural (corrosive gases, liquids and solids) and mechanical environments on concrete structures and further investigated the damage and deteriorating mechanisms and curing techniques of concrete structures in the main coal cleaning plants. Our study can provide a theoretical basis for ensuring the reliability of concrete structures in main coal cleaning plants.     

地质雷达和瑞雷波检测公路工程质量技术研究

地球物理方法的应用,使公路工程质量检测技术变得更加简捷、高效和经济,能够有效缓解当前路况检测和公路工程维护所面临的压力.在介绍了地质雷达和瑞雷波探测法的基本工作原理的基础上,将这2种探测技术应用在公路工程质量检测中,详细介绍了它们对公路厚度、压实度、抗压强度、弯沉值、含水量、脱空区段等检测的具体实施方法和步骤,并指出了相关注意事项.分析认为,随着技术的更新和设备的完善,地质雷达和瑞雷波技术能够有效地应用到公路工程的质量检测过程中,有着很好的应用前景和推广价值.     

网络融合边界的电信DoS攻击检测*

为了检测网络融合边界的电信拒绝服务攻击,首先针对攻击的类型分别提出了基于呼叫统计或流量信号分析的检测方法,并采用分步骤的策略设计了检测系统,将两种检测算法分别应用于粗检测步骤,再通过精检测步骤确认攻击并找出攻击源.模拟实验结果表明,该方案能够有效地检测出典型的攻击,并能够实时在线检测,具有良好的实用价值,为应对网络融合所带来的新安全问题提供了一种解决方案.     

基于免疫原理的恶意软件检测模型*

针对恶意软件检测尤其是未知恶意软件检测的不足,提出一种基于免疫原理的恶意软件检测模型,该模型采用程序运行时产生的IRP请求序列作为抗原,定义系统中的正常程序为自体,恶意程序为非自体,通过选定数量的抗体,采用人工免疫原理对非自体进行识别。实验结果表明,此模型在恶意软件的检测方面具有较高的准确率,且误报和漏报率较低,是一种有效的恶意软件检测方法。