有限元模型转换及其在金属板料成形数值模拟中的应用

本文根据CAD和CAE软件各自的功能和特点 ,探讨了板料成形数值模拟中CAD模型向CAE模型转换的方法 ;并针对有限元分析软件ANSYS与ABAQUS的实际特点 ,编写了有限元模型转换接口程序 ,用实例验证了所编接口转换程序的可行性与正确性。     

新型硬齿面环面蜗杆传动研究

采用精确磨削TI蜗杆的砂轮，用类似直廓环面蜗杆或平面包络环面蜗杆的磨削方法加工环面蜗杆，使该蜗杆和齿面形状与砂轮曲面相同的蜗轮相配合，形成一种新型蜗杆传动，给出了这种传动蜗杆副齿面的数学模型，并通过计算机仿真得出了这种传动蜗轮齿面上接触线的形状及分布特征，初步分析了其啮合特点。     

Modeling of stress ratio effect on Al alloy SAE AMS 7475-T7351: Influence of loading direction

The main goal of this work was to evaluate the effectiveness of Walker’s equation in collapsing the fatigue crack propagation data of a SAE AMS 7475-T7351 aluminum alloy loaded either longitudinally (L-T) or transversely (T-L) to the rolling direction. T-L orientation testpieces presented lower ductility and fracture toughness values than L-T orientation. As a consequence, during the fatigue crack propagation tests, T-L testpieces exhibited a stronger influence of monotonic modes of fracture, resulting in higher Paris exponent values,m. Walker’s model was able to collapse fatigue crack propagation data of L-T test pieces at different applied stress ratios,R. However, for the T-L orientation, due to theR ratio dependency onm andC, simply averaging ofm values for the calculations of Walker’s exponent proved to be inefficient. A simple analytical procedure was proposed by the authors to modify Walker’s model to take into account such effect. For T-L test pieces, when Walker’s model is modified by considering both Paris’s exponent as well the coefficient as a function of theR ratio, the fatigue crack growth data collapses within a narrow band, thus allowing predictions to be made satisfactorily. The collapsed band is even narrower if the empirical relationm=a+blogC is used instead of simple polynomial equations due to a better correlation coefficient.     

机械加工工艺过程质量控制模型的研究

提出一种基于误差传递思想和灰色预测理论的质量控制的误差模型。在工艺设计中利用该模型合理制定工序公差可以提高工序的工艺能力，从而提高零件的成品合格率。在加工过程中利用误差模型预测6δ值变化并根据各工序的工艺能力的动态变化来适时地动态调整工序公差，以提高工艺过程成品合格率，从而为CIMS的质量控制提供一种手段。     

基于B/S模式的CAPP制造资源管理系统的实现

许多企业内部建有Internet／Intranet网来加强企业内部的信息集成和共享。顺应这一趋势，文章提出了基于B／S模式的CAPP制造资源管理系统，利用网络编程语言VBScript实现制造资源的共享。文章首先通过和C／S模式比较，概述了B／S模式的优势，并建立了适合于动态变化环境的制造资源模型。最后结合应用实例探讨了利用ASP、ADO、SQL和ODBC技术实现制造资源的远程知识查询的理论和方法。     

铝元素的添加对锆基合金非晶形成能力影响的电子结构模型

通过构建非晶合金的团簇模型，利用离散变分法从电子层次研究了Al元素对Zr-Cu非晶合金中团簇稳定性的影响。结果表明，Al原子的引入提高了团簇中原子间的亲和力，并且随着Al原子数的增加，亲和力增大，导致新的团簇产生，从而破坏了非晶的团簇结构，Al含量对Zr-Al-Ni非晶合金的稳定性的影响可通过Fermi能级处的态密度大小来反映。     

Metallochemical Analysis of the Reaction in a Mixture of Nickel and Aluminum Powders

Phaseformation processes are considered at the level of a mesocell of a mixture with the use of the state diagram for a binary system. Consecutive schemes of metallochemical reactions of formation and decomposition of intermetallide compounds in a mixture of nickel and aluminum powders are suggested. The problem of diffusion annealing of this mixture is numerically solved for two different conditions: at a constant temperature and at a temperature slowly increasing by a linear law.     

TESTING CHANGE-POINTS IN THE EXPLOSIVE GAUSSIAN AUTOREGRESSIVE PROCESSES

Abstract. A functional limit theorem with a particular function class and topology is derived for non-ergodic type time series. This limit theorem allows us to study the asymptotic law of the associated likelihood ratio test (LRT) statistic for testing the presence of a change in the covariance parameter in the explosive Gaussian autoregressive model. We show that the level of the LRT cannot be approximated without introducing appropriate normalization. The limit law of a particular weighted likelihood ratio test is examined through a simulation study and is compared with the well-known Kolmogorov distribution obtained in the stationary case; we conclude that for practical applications when the root is really close to unity one can use the same thresholds as in the stationary case. This procedure is applied to the study of three real time series known to be non-stationary.     

复合材料压力容器的树脂体系的固化动力学研究

本文采用非等温DSC方法对碳纤维增强复合材料压力容器的树脂体系进行固化动力学研究。应用Malek方法处理实验数据,得到此树脂体系机理函数服从一个二参数(m,n)的自催化模型,其中活化能通过Ozawa法得到。通过温度场模拟结果与试验值比较,验证本文建立的动力学模型的可靠性。因此,可为复合材料压力容器固化成型过程中瞬态温度场的模拟提供必要子模型。     

Simulation of nitrogen dynamics and biomass production in winter wheat using the Danish simulation model DAISY

A dynamic simulation model for the soil plant system is described. The model includes a number of main modules, viz., a hydrological model including a submodel for soil water dynamics, a soil temperature model, a soil nitrogen model including a submodel for soil organic matter dynamics, and a crop model including a submodel for nitrogen uptake. The soil part of the model has a one-dimensional vertical structure. The soil profile is divided into layers on the basis of physical and chemical soil characteristics. The simulation model was used to simulate soil nitrogen dynamics and biomass production in winter wheat grown at two locations at various levels of nitrogen fertilization. The simulated results were compared to experimental data including concentration of inorganic nitrogen in soil, crop yield, and nitrogen accumulated in the aboveground part of the crop. Based on this validation it is concluded that the overall performance of the model is satisfactory although some minor adjustments of the model may prove to be necessary.