基于DPI的流量识别系统的研究

随着网络应用的多样化,各种网络流量不断复杂化、多样化,各种网络安全事故频发.网络流量的分布不均匀以及网络安全状况的复杂使得互联网急需管理和维护,网络流量的监控问题变得尤为重要.流量识别作为一种能够自动、实时保障网络监控的技术,成为防火墙一类静态安全设备的必要补充,越来越受到人们的重视.深度包监测（DPI）技术以其识别的准确性成为应用越来越广泛的识别技术.然而单纯的软件实现系统监测速度较慢,不能满足网络高速数据包处理的吞吐量要求.单纯的硬件识别知识库会占用大量内存,一般的硬件内存达不到要求.单纯的软件识别效率又不能满足越来越大的网络吞吐量需求.这种情况下,文章研究了一种基于正则表达式的软硬件结合系统实现方法,该方法的主要思想是硬件识别网络常见协议,软件识别复杂的网络协议,且两者都支持正则表达式.这种方法兼具软件与硬件实现的优点,与传统的软件实现相比,在识别效率方面有明显提高.     

高能电子束辐射对硼酚醛树脂的影响

对硼酚醛树脂进行了高能电子束辐射,并进行了差热分析、热失重分析、残炭率和炭化后的粉末电阻率测试.结果表明硼酚醛树脂辐射前在100～200 ℃之间有一个明显的吸热反应峰,固化温度范围较大;而经过辐射后,100～300 ℃反应峰较少,硼酚醛树脂的固化温度范围明显减小,且固化温度降低.炭化后粉末电阻率由辐射前的3899.6 μΩ·m显著提高为辐射后的4951.6 μΩ·m;残炭率由60.6%降低为58.1%.     

Fluorinated acrylic polymers: Surface properties and XPS investigations

A series of polymers based on methylmethacrylate, butylacrylate, and ω‐perfluorooctylalkylacrylate were prepared by radical polymerization. By changing both the length of the hydrocarbon spacer, between the fluorinated chain and the ester function of the fluorinated monomer, and its concentration, the surface properties of the resulting terpolymers were greatly influenced. Polymers containing small amounts of fluorinated comonomer units had considerably reduced surface energies compared to the copolymer poly (methylmethacrylate‐co‐butylacrylate) taken as reference. The outermost surface composition has been investigated by the XPS technique, confirming the strong fluorine enrichment. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 821–827, 2006     

Investigation of conductivity characteristics of nitrile butadiene rubber vulcanizates filled with semiconducting carbide ceramic

SiC‐ and B₄C‐filled NBR rubber composites were prepared with various volume fractions of filler by a conventional roll‐mill method. The morphological structures of the NBR–SiC and NBR–B₄C composites were analyzed by scanning electron microscopy. The dependence of room‐temperature volume resistivity (ρ_v) on the concentration of filler in the two systems was studied. In addition, variation in the number of current carriers (n), mobility carriers (μ), dielectric constant (ε), and dielectric loss factor (tan δ) on filler concentration in the two systems were investigated in detail. The applicability of composites as negative temperature coefficient (NTCR) linear thermistors was studied by the dependence of volume resistivity on temperature. The resistivity showed negative temperature dependence and changed linearly with temperature parallel. The conduction mechanism of the conductivity of the two composites was analyzed in terms of the computed activation energy and hopping energy. Change in volume resistivity as a function of frequency for the two systems was also investigated. Finally, the dependence of volume resistivity on applied pressure and possible real applications of these composites as transducers in pressure sensors were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2158–2165, 2007     

延长生焦时间对延迟焦化装置的影响

国内焦化装置的生焦时间几乎都采用24小时，设计的焦炭塔空高较大，在装置低负荷生产时，适当延长生焦时间，不仅可降低装置的运营成本、提高焦炭质量、降低劳动强度，而且还可降低维修费用。安庆焦化成功地在一套装置上实现了48小时生焦操作，年运行200天，增效约100万元。     

汽车发动机节能优化控制仿真与研究

在车辆发动机优化设计的研究中,车辆节能控制的优化能够有效提高汽车发动机燃油燃烧效率,降低发动机的燃油消耗.在汽车行驶过程中,存在着起步突变、急停、忽然转向等特殊情况,利用传统的PID节能控制方法需要大幅度、快速的调整控制参数,以满足意外情况的控制稳定性需求,但改变控制过程中没有考虑对能量的消耗问题,大幅改变参数势必造成能量的无谓损耗.提出一种采用免疫PID的车辆节能控制系统.根据人体免疫应答机制的基本原理,将免疫反馈引入到PID车辆节能控制系统中.采用单层神经网络作为抑制抗体的调节系数,能够实现车辆复杂行驶状态下的非线性过程的拟合.利用神经网络和PID结合的方法建立免疫PID车辆节能控制模型,根据模型的输出实现了车辆节能的精确控制.实验结果表明,利用免疫PID的车辆节能控制系统进行车辆节能控制,能够有效提高控制的精度.     

熔盐堆临界能谱与通量分布的仿真计算

研究熔盐反应堆在临界工况下的堆芯中子能量和中子通量分布.由于熔盐反应堆的几何结构与目前的热中子反应堆存在很大差异,导致热中子反应堆能谱的求解方法在对熔盐堆进行计算时存在几何处理上的困难.针对上述问题,提出采用具有任意几何处理能力的中子输运计算软件MCNP对熔盐堆堆芯结构进行建模,采用能量区间上的平均通量代替该区间内通量分布的方法,计算了两种熔盐堆在临界工况下的堆芯中子能谱.结果表明,MSBR堆芯能谱为典型的热堆能谱;MO-SART堆芯能谱介于快堆能谱和热堆能谱之间.结果能够作为堆芯扩散计算中能量分群方法的依据.同时分析了堆芯内中子通量分布情况,结果表明熔盐堆中子通量分布具有中间高、四周低的特点.     

基于K-means聚类和RANSAC的图像配准算法研究

针对图像配准中特征点匹配方法存在实时性不高和精度低的问题,提出了一种基于K means聚类和RANSAC的图像配准算法。该算法根据匹配点对距离和方向特征的视差约束条件,首先利用K means聚类对匹配点对进行预处理,剔除大部分错误匹配点,然后利用RANSAC进行二次优化,实现了图像的快速和精确配准。实验结果表明,该算法不仅提高了图像配准的精确度,而且提高了图像配准的速度。     

Phosphate sorption isotherms in relation to P nutrition of wheat (Triticum aestivum)

The phosphate sorption isotherms are needed to explain differential plant responses to P fertilization in soils. Laboratory and greenhouse experiments investigated the use of phosphorus sorption isotherms in relation to P fertilizer requirement of wheat in ten benchmark soils of Punjab, India. The modified Mitscherlich Equation (3) was used to describe plant response observed in different soils. Maximum obtainable yield (MOY) ranged from 11.6 g pot^–1 in Gurdaspur (I) sandy clay loam to 7.0 g pot^–1 in Nabha sandy clay loam. Response to P applied @ 25 mg P kg^–1 soil was maximum (77%) in Bathinda sand and minimum in Chuharpur clay loam (33%). The response curvature varied from 3.74 × 10^–2 in Nabha sandy clay loam to 4.43 × 10^–2 in Kanjli sandy loam. The soil solution P required to produce optimum yield (90% MOY) varied from 1.61 µg ml^–1 in Bathinda sand to 0.10 µg ml^–1 in Sadhugarh clay. Dry matter yield obtained at 0.2 µg ml^–1 solution P concentration ranged from 55% in Bathinda sand to 85% of MOY in Gurdaspur (II) clay loam. At the same solution P concentration (0.1 µg P ml^–1), dry matter yield was 91% in Sadhugarh clay, 80% in Gurdaspur (II) clay loam and, 43% of MOY in Bathinda sand and eventually coincided with the decreasing maximum buffer capacity (MBC) in these soils. At the same level of sorbed P (100 mg P kg^–1 soil) the yield was observed to be inversely proportional to MBC. The study, therefore, concludes that, soils should be grouped according to their P sorption characteristics and MBC before using critical soil solution P as a criterion for obtaining optimum yields.     

CORRELATION OF DIFFUSION COEFFICIENTS FOR LIQUIDS AND DENSE FLUIDS WITH TEMPERATURE AND PRESSURE

On the basis of the free volume theory and activation energy concept,a fundamental equation whichtakes into account the effects of temperature and pressure has been developed.By introducing differentexpressions for the free volume and activation energy,several equations for fluid diffusion coefficients were derivedaccordingly.With the van der Waals free volume and intermal energy formula,a three-parameter model for fluiddiffusion coeffficients at moderate pressure was obtained.The grand average absolute deviation percent of 345data points (44 systems)for self-and infinite dilute inter-diffusivities is 2.32,against the results of the model ofCohen and Turnbull,4.13.In particular,by means of the modified Carnahan-Starling free volume equation,afour-parameter model with average abosolute deviation percent 2.64(30 systems,644 data points)for theestimation of dense fluid inter-and self-diffusivities at high pressures and in supercritical conditions was derived.The derived model is superior to the method of L