Predicting plant yields using soil testing for phosphorus: Effects of error in the estimation of the maximum yield on interseasonal comparisons of yield prediction

Results from long-term field experiments in south-western Australia are presented in the form of relationships between yield, expressed as a percentage of the maximum yield, and soil test for phosphorus (P) values. Maximum yields were not always indicated by well defined yield plateaux. Different methods have been used to estimate the maximum yield value which is used to calculate yield as a percentage of the maximum yield so as to remove interseasonal variation. For all of these methods and for the same site, the same P fertilizer (superphosphate), and the same plant species, the relationship between yield and soil test P differed for different years. Consequently fertilizer recommendations based on the assumption that this relationship is constant are likely to be incorrect. We therefore question the validity of the common practice in soil testing programmes of using percentage yield values to remove interseasonal variation.     

焦炉装煤烟尘治理的烟气量计算

通过对焦炉装煤烟尘治理的烟气量计算和研究,提出不同治理系统的烟气量计算方法及应采取的措施。     

准连续波体制雷达最大熵方法的算法选择

准连续体制作为一种新型雷达体制以其固有的优越性给雷达界带来了巨大的冲击。其数字信号处理系统的开发是进一步完善该体制雷达的关键。本文针对数字信号处理系统中最大熵谱外推电路的算法选择进行了研究。     

一种新的图像水印方案

目标区域是图像中视觉上最重要的部分。针对现有的水印算法很少考虑图像中确定的目标区域这一问题，提出了一种基于目标区域的水印方案(WIOR)。方案首先利用小波变换分析图像的目标特征，并依据图像的小波高频系数特征对其进行聚类，获得水印的嵌入域，在此嵌入域中，选择小波系数并对其进行量化调制来嵌入二值扩谱水印；同时，通过只在图像的局部区域内嵌入较少的水印信息来改善水印的隐蔽性。实验结果表明，该方案对于一类具有突出目标特征的图像具有较好的效果。嵌入的水印主要优势在于真正把水印嵌入图像的视觉重要部分，从而能有效地抵御剪切攻击，而且可以实现盲检测。     

A general variance predictor for Cavalieri slices

A general variance predictor is presented for a Cavalieri design with slices of an arbitrary thickness t ≥ 0. So far, prediction formulae have been available either for measurement functions with smoothness constant q = 0, 1, … , and t ≥ 0, or for fractional q ∈ [0, 1] with t = 0. Because the possibility of using a fractional q adds flexibility to the variance prediction, we have extended the latter for any q ∈ [0, 1] and t ≥ 0. Empirical checks with previously published human brain data suggest an improved performance of the new prediction formula with respect to the hitherto available ones.     

Prediction of foam growth and its nucleation in free and limited expansion

The influence volume approach (IVA) is often utilized for modeling the mass transfer process dictating bubble growth dynamics in physical foaming. However, the assumed concentration profile in the IVA method is only valid when the changes in dissolved gas concentration are small (less than 5%). In addition, the validity of the IVA method is difficult to justify in chemical foaming applications because of the difficulties involved in defining the dissolved gas concentration profile.In the present work, we define two distinct stages of bubble growth for physical foaming. These two stages are termed as free and limited expansion and are controlled by the bubble nucleation rate. Bubble nucleation is assumed to occur only in the free expansion stage. In this stage, the bubble pressure drops substantially from an initially high pressure in the supersaturated state while the dissolved gas concentration changes very little. The second stage of our two-stage mass transfer model is termed the limited expansion stage and accounts for bubble growth in the late stages of foam evolution, when the pressure changes become small. However, in the limited stage of bubble growth the dissolved gas concentration drops significantly, as the available dissolved gas is depleted. To summarize our two-stage mass transfer model of foam expansion, the pressure difference between the bubble phase and the liquid phase is the primary mechanism for driving mass transfer in the early (free) stages of foam growth and the concentration difference is the driver for bubble growth in the late (limited) stages of growth. The first stage can be regarded as the nucleation stage and it is relatively short; while the second stage can be regarded as the bubble growth stage and is much longer. Most of the bubble volume expansion takes place in the second stage.The concentration gradient at the bubble edge, which is often ignored in other models, is analyzed in detail in this paper. The details of our novel mass transfer model are also presented.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

熔体的粘度，亚稳相，相变和相图——Ⅲ．合金液相相图

对Sn（x）Bi（1-x）11种组分（x=0.10％，20％…80％，90％，100％）的熔体的粘度进行了测量，给出了它们的相变点Tt，相区和相参数；根据这些参数作出了一个二元合金液相相图；为了表明相区的划分和每个相区的结构特征提出两种相图的形式；第1，温度一组分（T-X）图，第2，结构-组分（df-x）图。     

砂岩储层渗透率表征方法探讨

渗透率是反映储层渗流能力的重要参数，目前对于单一储层的渗透率表征方法，通常是在岩心分析渗透率或测井解释渗透率的基础上进行厚度加权算术平均。这种方法对于均质的储层来说是适用的，但对于非均质严重的储层，不能准确反映该储层的实际渗流能力。本文提出一种应用可动流体体积权衡表征渗透率的方法，经实际资料验证，能较好地反映储层的实际渗透能力。     

Inference for pth‐order random coefficient integer‐valued autoregressive processes

Abstract. A pth‐order random coefficient integer‐valued autoregressive [RCINAR(p)] model is proposed for count data. Stationarity and ergodicity properties are established. Maximum likelihood, conditional least squares, modified quasi‐likelihood and generalized method of moments are used to estimate the model parameters. Asymptotic properties of the estimators are derived. Simulation results on the comparison of the estimators are reported. The models are applied to two real data sets.