In the theory of blast waves

The behavior of the blast wave from an exploding spherical volume is investigated mathematically over the entire range of blast-wave propagation. The computational method uses analytical results for a similar problem for a point explosion with counter pressure and the theory of an asymptotically equivalent point explosion. The asymptotic solution of the gas-dynamic equations away from the explosion site is matched to the initial conditions of blast-wave formation due to the disintegration of the detonation shock upon its arrival at the boundary of the exploding volume. The spatial distribution of the blast-front pressure is found for combustible gaseous systems and solid explosives. The theoretical results obtained agree quantitatively with available experimental measurements. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 93–99, July–August, 2006.     

变温条件下HDPE/CB的正电子湮灭特性

对掺杂了25份（phr）导电炭黑（CB）的样品进行了正电子湮灭寿命谱的变温测量，在玻璃化转变温度以上，随着温度的增加，自由体积的大小线性增加，在玻璃化转变温度以下，自由体积的大小基本不变，o-Ps的强度在－40℃下基本不变，从－40℃以上开始增加，但在50℃以上上升有加快的趋势，与PTC材料的PTC现象和导电性能有一定的关联。     

浅谈诺兰达工艺控制

介绍了诺兰达炉氧平衡控制方法 ,对控制中常见的问题总结了一些相应措施。     

一种提高低温流体比体积计算精度的方法

采用了一个既能提高立方型状态方程比体积计算精度，又不影响气液平衡条件的简单摩尔修正项来改进PR方程比体积的计算。本文对19种低温流体给出其修正项的值，计算饱和蒸气和液体比体积，并与未修正的PR方程的计算值比较，结果表明这种修正能显著提高低温流体（包括量子流体氢、氦和强极性的氨气）饱和液体比体积的计算精度，并对蒸气比体积的计算也略有改进。     

New quadratic models for the maximum weighted cut problem

New quadratic models are proposed to improve the upper-bound estimates in the maximum weighted cut problem. They are found by two original methods for deriving redundant quadratic constraints. A well-known linear model is shown to follow from the models proposed. Recommendations on how to develop its strengthened analogs are given. This study is partially sponsored from the grant UM2-2574-KV-03 (CRDF Cooperative Grants Program). __________ Translated from Kibernetika i Sistemnyi Analiz, No. 1, pp. 63—75, January–February 2006.     

碘量法测铜中物质性质和分析操作

本文讨论了碘量法测定铜量中一些有关物质的特性,以及这些性质对分析条件和操作的要求。     

白云石化作用及黔桂地区泥盆系——石炭系层（块）状白云岩的成因

介绍了20世纪60年代以来国际上提出的9种主要的白云石化作用模式及机理，在此基础上对黔桂地区泥盆系—石炭系层（块）状白云岩的成因进行研究，建立了研究区研究层位中的层状白云岩储层概念模式，包括同生成岩环境中的潮坪潮汐泵汲白云石化模式，潮下海水泵汲白云石化模式，调整白云石化模式，埋藏成岩环境中的调整-压实排挤流白云石化模式，有机质参与的压实排挤流白云石化模式，以埋藏热水为主的混合白云石化模式，以埋藏热盐水为主的混合白云石化模式．以及与区域构造断裂有关的构造热液白云石化模式。     

Polygonal extrusion

A sweeping operation called polygonal extrusion is defined to improve the modeling power of CSG-based modeling. It is assumed that a 2D cross-sectional polygon (sweeping polygon) moves in space while its containing plane is kept orthogonal to the tangent direction of the trajectory curve, a planar polygonal chain having no self-intersections. The objective of the paper is to compute the boundary of the swept volume of the sweeping polygon as a set of polygons (or triangles). The most significant challenge to accomplishing this objective is the problem of trimming the swept volume. To solve the trimming problem, 2D-curve offsetting methods are employed. Two algorithms are presented for polygonal extrusion that are based on different offsetting methods, the Voronoi diagram and PWID offset. The proposed algorithms have been implemented and tested with various examples. Published online: 28 January 2003     

纤维体积分数对K3D/MCPA复合材料力学性能的影响

本文研究了纤维体积分数对三维编织芳纶纤维增强铸性尼龙(简称K3D／MCPA)复合材料力学性能的影响。研究表明，K3D／MCPA复合材料有优异的抗冲击性能，冲击强度比三维编织芳纶纤维增强铸性尼龙(简称C3D／MCPA)和纯基体均有大幅度的提高，且随着纤维体积的提高而升高。K3D／MCPA复合材料剪切强度随纤维体积比的增大而增大，其纵向剪切强度低于纯基体和C3D／MCPA复合材料，但其横向剪切强度高于它们。K3D／MCPA复合材料弯曲强度与弯曲模量随纤维体积比的提高而提高，但与相同体积比的C3D／MCPA相比，K3D／MCPA的弯曲强度与弯曲模量均较低。     

保序回归的大样本性质

利用保序回归与极大似然估计之间的关系,从极大似然估计解的大样本性质出发,得到了保序回归解的两个大样本性质。