Recursive solution of inverse natural convection problems by means of mode reduction

 A recursive method based on the Kalman filtering is developed to solve inverse natural convection problems of estimating the unsteady nonuniform wall heat flux from temperature measurements in the flow. By employing the Karhunen–Loève Galerkin procedure that reduces the Boussinesq equation to a small set of ordinary differential equations, the computational difficulties associated with the Kalman filtering for the partial differential equations are overcome. The present method is assessed through several numerical experiments, and is found to yield satisfactory results. Received 20 January 2001 / Accepted 31 May 2001     

基于小波算法的摆式列车倾摆指令实时提取

由于摆式列车线路检测系统测得的线路超高时变率信号是平稳的且含有幅度大、频带宽的噪声 ,难以用常规的滤波方法得到摆式列车实时倾摆指令。本文介绍了多分辨率分析的基本原理及快速算法 ,讨论了基函数的选取 (构造 )原则。根据超高时变率信号的特征 ,合理选择基函数 ,提出了一种对流式数据的实时滤波算法 ,通过对仿真和线路试验实测数据的处理与常规滤波方法进行了比较。结果表明 ,该算法能更快地实时提取摆式列车倾摆指令。     

基于广义最小均方的自适应递归滤波算法

本文提出了一种广义最小均方(GLMS)算法,分析了GLMS算法的性能,并根据GLMS算法,导出一种自适应递归滤波(ARF)算法。在推导中,ARF算法避开了超稳定定理,从而考虑自适应系统的严格正实条件和Popov不等式是不必要的。计算机模拟表明ARF算法具有很高的收敛速度。     

关于正整数的k次根的整部

对于给定的自然数m，令口α（m)为m的是的次根的整部。即：α(m)=[m^1/k]。研究了α(m)的渐近性质，并给出了一个有趣的渐近公式。     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.     

Fatigue crack growth analysis of welded aluminium RHS T-joints with manipulated residual stress level

The fatigue life of a welded aluminium T‐joint made from beams with rectangular hollow section (RHS) has been predicted using a crack propagation analysis and compared with experimental results from joints with different residual stress levels. To include the effect of the residual stresses, the stress ratio was calculated at the weld toe and, via Walker's equation, introduced into the analysis. How to obtain the Walker exponent has been discussed in detail. The introduction of a stress ratio at the weld toe provides good agreement between the experimentally and analytically found S–N curves. The effect of the residual stress was successfully included in the analysis.     

基于参考模型的自适应话音处理

本文讨论了一种带有参考通道的自适应话音消噪滤波器原理，该滤波器采用最小均方差(心幅)算法。将此滤波器应用于复杂噪音背景的话音信号提取，能很好地抑制背景噪声，从而获得清晰的话音信号。     

Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common-rail injection system in a diesel engine

This paper investigates the effect of injection parameters on the characteristics of dimethyl ether (DME) as an alternative fuel in a diesel engine with experimental and analytical models based on empirical equations. In order to study macroscopic and microscopic characteristics of DME fuel, this work focuses on the atomization characteristics of DME and compares experimental and predicted results for spray development obtained by empirical models for diesel and DME fuel. Detailed comparisons of spray tip penetration from three different empirical correlations and from visualization experiments of diesel and DME fuels were conducted under various fuel injection conditions. In comparison with the results of different empirical equations for measured spray tip penetration, the experimental results of this study provide good agreement with the calculation results based on empirical equations, except during the earliest stage of the injected spray sequence. The results of atomization characteristics indicate that DME showed better spray characteristics than conventional diesel fuel. Also, the fuel injection delay and maximum injection rate of DME fuel are shorter and lower than those of diesel fuel at the same injection conditions, respectively.     

ZPG系列盘式真空过滤机的研制与应用

详细介绍了ZPG系列盘式真空过滤机的主要特点、基本原理和主要技术参数。对盘式真空过滤机的过滤理论进行了系统的研究 ,以及为提高过滤系数和降低滤饼水分所采取的关键措施。与传统的真空过滤机进行了对比 ,表明ZPG系列盘式真空过滤机的滤饼水分可以降低 1 %～ 3 % ,过滤系数提高 3 0 %～5 0 % ,过滤每吨精矿的能耗可以降低 5 0 %左右 ,使得ZPG系列盘式真空过滤机在国内各大冶金矿山得到全面推广使用 ,创造了巨大的经济效益和社会效益。     

Facial detection and location based on skin color and eye characteristic

This paper comes true a system of facial detection and location. Firstly, it realizes the facial detection of candidate region used skin color for the given image, and considers the influence of similar skin. Secondly, it realizes the location for eye region used the gray characteristic of eye and correction of central measurement, and makes further selection for facial candidate region. The end, it normalizes the facial image and makes it as front standard image, so realizes the facial characteristic location.