淀粉液化液灭酶方法的研究

某些情况下淀粉液化液需要严格控制液化的程度 ,因此需要及时终止残余淀粉酶的活性。实验用降低液化液 pH值、升高温度、以及两者并用等 3种方法结束液化反应过程 ,实验结果可作为工业生产过程参考。     

Wear resistance of plasma coatings for a constant work of friction

We analyze the wear resistance of plasma coatings for a constant work of friction. The dependences of the wear resistance of the coatings are obtained for a broad range of loading conditions. It is shown that the minimum sensitivity to loading conditions is exhibited by the molybdenum coatings. It is also established that the wear resistance of the coatings decreases as the amplitude of displacements increases and the cyclic frequency of the tests decreases due to the intensification of fatigue processes on the surfaces. The comparative characteristics of coatings are presented. __________ Translated from Problemy Prochnosti, No. 5, pp. 94–100, September–October, 2007.     

A multi-objective programming model for scheduling emergency medicine residents

Scheduling emergency medicine residents (EMRs) is a complex task, which considers a large number of rules (often conflicting) related to various aspects such as limits on the number of consecutive work hours, number of day and night shifts that should be worked by each resident, resident staffing requirements according to seniority levels for the day and night shifts, restrictions on the number of consecutive day and night shifts assigned, vacation periods, weekend off requests, and fair distribution of responsibilities among the residents. Emergency rooms (ERs) are stressful workplaces, and in addition shift work is well-known to be more demanding than regular daytime work. For this reason, preparing schedules that suit the working rules for EMRs is especially important for reducing the negative impact on shift workers physiologically, psychologically, and socially. In this paper, we present a goal programming (GP) model that accommodates both hard and soft constraints for a monthly planning horizon. The hard constraints should be adhered to strictly, whereas the soft constraints can be violated when necessary. The relative importance values of the soft constraints have been computed by the analytical hierarchy process (AHP), which are used as coefficients of the deviations from the soft constraints in the objective function. The model has been tested in the ER of a major local university hospital. The main conclusions of the study are that problems of realistic size can be solved quickly and the generated schedules have very high qualities compared to the manually prepared schedules, which require a lot of effort and time from the chief resident who is responsible for this duty.     

Bridging process and structure through criteria

Scholars in design face two central challenges in design methods inquiry: firstly, to integrate process and solution, and secondly, to examine developmental junctures leading to innovation. With these goals in mind, we maintain that design criteria deserve greater attention and illustrate this position with a study of noted designers' use of criteria. The primary finding was that five criteria functions were considered during the design process. The study also explored potential relationships between designer variables (i.e., professional expertise and personality type) and criteria use.     

Simulation of water and nitrogen dynamics in soils during wastewater applications by using a finite-element model

A mathematical model was developed to simulate water movement, mass transport, and nitrogen transformations in soils during wastewater applications. The model is one-dimensional and based on the Galerkin finite-element method. The submodel of mass transport of nitrogen incorporates the convection-dispersion processes of ammonium and nitrate nitrogen, nitrification, denitrification, ammonium exchange and uptake of ammonium and nitrate ions. The accuracy and validity of the proposed model was examined by comparison with an explicit-implicit finite-difference model results. The model was used for simulation of water and nitrogen dynamics during wastewater application in homogeneous and multi-layered soils under different N concentration, rate, duration and scheduling of application.     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

Effects of temperature, ammonium and glucose concentrations on yeast growth in a model wine system

In enology, alcoholic fermentation is a complex process involving several mechanisms. Slow and incomplete alcoholic fermentation is a chronic problem for the wine industry and factors leading to sluggish and stuck fermentations have been extensively studied and reviewed. The most studied cause of sluggish and stuck fermentation is the nitrogen content limitation. Nevertheless, other factors, such as temperature of fermentation and sugar concentration can affect the growth of yeasts. In this study we modelled the yeast growth‐cycle in wine model system as a function of temperature, sugar and ammonium concentrations; the individual effects and the interaction of these factors were analysed by means of a quadratic response surface methodology. Cell concentrations and weight loss were monitored in the whole wine fermentation process. The results of central composite design show that lower is the availability of nitrogen, higher is the cell growth rate; moreover, initial nitrogen concentration also influences survival time of Saccharomyces cerevisiae.     

Immobilized α-amylase from Bacillus licheniformis: a potential enzymic time—temperature integrator for thermal processing

Biphasic and nth-order models were tested as to their usefulness to fit experimental inactivation data of Bacillus licheniformis α-amylase, immobilized on glass beads, and were discussed with respect to their suitability to characterize the considered enzymic system as a time—temperature integrator (TTI) to evaluate heat processes. Both isothermal and non-isothermal inactivation experiments were carried out. Model (kinetic) parameters (rate constant k, activation energy E_A and reaction order n) were estimated using a non-linear regression procedure. The results obtained, especially the activation energy of about 293 kJ mole^–1, indicated a potential use of this system as a TTI for heating processes in the temperature range of 96–108°C.     

Process control: An overview and personal perspective

This paper presents an overview and personnal perspective on recent developments and current practice in computer process model. The basic concepts behind conventional process control are reviewed to provide a starting point for the non-control specialist and process engineer. The ensuing sections on Internal Model Control (IMC), Model Predictive Control (MPC) and adaptive control illustrate the evolution of control technology from the traditional multiloop strategies to the modern, multivariable, model-based, computer control systems now being used in industry. The paper does not provide a complete, critical review of process control. However, the discussion and the recommended references should provide a good starting point for anyone wanting to become familiar with current practice and some of the new directions of process control.