移动学习在高职教学中的应用研究

随着网络技术发展及移动运营商之间竞争导致流量资费的下降,手机、平板、itouch等设备成为人们生活中不可或缺的部分。然而,通信技术的发展在方便人们获取知识的同时,也极大的消耗着人们的时间：课堂上,低头把玩手机的学生不在少数。新形势下,教师应该如何应对？该文通过分析移动学习技术、移动学习形式、移动学习特点,高职院校教学困境,提出在高职教学中应用移动学习思想,并给出几中在高职教学中较为可行的移动学习应用方案。     

探讨数字化校园背景下的“微门户”建设构想--基于福建电力职业技术学院的数字化校园建设

该文分析了高职院校数字化校园建设的具体问题,借助“微门户”的概念,提出了数字化校园背景下的“微门户”建设构想,为高职院校数字化校园建设提供了一条有效的建设思路。     

微媒体环境下大学生移动学习探究

以微信、微博为代表的微媒体迅速普及,悄然影响着大学生的生活和学习,教师如何借助这些新型媒体引导大学生更好地移动学习值得我们探究,本研究通过问卷调查和分析,对在微媒体环境下开展大学生移动学习提出了若干建议,为相关教师提供借鉴。     

聚砚基纤维素填充复合超滤膜材料的研究

以聚砜为原材料,通过向铸膜液中混入纤维素微纳晶体,采用浸没沉淀相转化工艺制备了纤维素填充聚砜基复合超滤膜材料。测定了超滤膜的水通量、截留率、平均孔径、孔隙率等性能,通过单因素影响试验分析了各个工艺因素对产品性能的影响;考察了膜的化学稳定性以及运行压力对性能的影响;通过扫描电镜观察了膜孔的结构;并通过浊点滴定实验得到膜液的三元相图,分析了纤维素的加入对成膜过程的影响。     

Low-Power Operational Amplifier for Real-Time Signal Processing System of Micro Air Vehicle

A low-power complementary metal oxide semiconductor(CMOS) operational amplifier (op-amp) for real-time signal processing of micro air vehicle (MAV) is designed in this paper. Traditional folded cascode architecture with positive channel metal oxide semiconductor(PMOS) differential input transistors and sub-threshold technology are applied under the low supply voltage. Simulation results show that this amplifier has significantly low power, while maintaining almost the same gain, bandwidth and other key performances. The power required is only 0.12mW, which is applicable to low-power and low-voltage real-time signal acquisition and processing system.     

Sintering technology for micro heat pipe with sintered wick

In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe (MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP’s heat transfer capabilities were first analyzed, then copper powders with different cell sizes and dispersions were sintered in RXL-12-11 resistance furnace under the protection of the hydrogen at different sintering temperatures for different durations of sintering time, and finally the sintered wicks’ scanning electron microscope (SEM) images and their heat transfer capabilities were analyzed. The results indicate that the wick sintered with copper powders of larger cell size or smaller size range has better sintering properties and larger heat transfer capabilities; and that the increase of either sintering temperatures or sintering time also helps to improve the wick’s sintering properties and heat transfer capabilities, and the former affects more obviously than the latter. Considering both its manufacturing cost and performance requirements, it is recommended that copper powders with the size range of 140–170 μm are sintered at 900–950°C for 30–60 min in practical manufacturing. In addition, two approaches to improve wick’s porosity are also proposed through theoretical analysis, which suggests that the larger the wick’s porosity, the better the heat transfer capabilities of the MHP.     

微悬臂梁制作中的牺牲层释放工艺研究

探讨了微悬臂梁的制作中的牺牲层释放工艺,针对FPA结构中微悬臂梁的结构层和牺牲层材料的选择和制作方法,从释放机理的角度对磷硅玻璃腐蚀速率等释放关键技术作了研究,给出了相应的加工参数。     

微电解-混凝沉淀-生化法处理松脂加工废水

介绍了采用微电解-混凝沉淀-生化法处理松脂加工废水的调试操作．在微电解处理过程中,当进水CODcr为976～2012mg／L时,出水CODcr为262～296mg／L,CODcr的平均去除率为79．3％;在生化处理过程中,当进水CODcr为342—415mg／L时,出水CODr,控制在100mg／L以下,CODcr的平...     

五自由度宏/微双重驱动并联机构及其运动学分析

提出了一种扫描电子显微镜用4-PSPS/PRPUR五自由度宏/微双重驱动并联机构,该机构可以实现三维移动和两维转动。采用螺旋理论分析了该机构的自由度,采用基于螺旋系线性相关性的并联机构输入选取判别方法,选取了驱动副并进行了合理性判别。在此基础上对该双重驱动并联机构进行了位置反解分析,结合其应用给出了数值算例,并进一步对该机构进行了速度、加速度分析,且给出了速度、加速度的数值算例。     

简易人体穴位识别治疗仪

为了解决非专业人群寻找穴位难、不准确、不易操作等难题,设计了一种以SPCE061A为核心MCU（Micro Control Unit）的简易人体穴位识别治疗仪。给出了系统结构和实现流程,提出了一种基于层次分析原理的新型穴位检测方法,并讨论了环境因素对穴位识别结果的影响。通过人体穴位检测实验表明,本系统的穴位与非穴位正确识别率可分别达到95%和98%以上,且输出频率可调、波形可变的脉冲电压可达到模拟中医针灸治疗的作用。与传统找穴位方法相比,该方案具有操作简单、功耗低、性价比高等优点。