Pole shifting for matrices over real algebras

Pole shifting of multivariable control system over finite dimensional real algebras is studied. The main results are expressed in terms of the minimal polynomial of A + BF, where F is a feedback.     

Effect of Plate Oscillation on Bubble Residence Time in an Aerated Stagnant Liquid

Gas transfer efficiency during absorption is an important factor in various technological processes involving the interaction between liquid and gaseous systems. It is known that gas bubble motion characteristics strongly affect the efficiency of mass transfer during gas absorption. A device for mechanical vibration of an aerated liquid was designed, based on a cylindrical column filled up with tab water and a plate oscillating in the vertical direction. The goal of the present study is to investigate the effect of vibration parameters such as amplitude, frequency and form of the applied signal on the efficiency of the oxygenation process. Bubble residence time in the liquid and bubble depth of submergence related to the oscillating plate surface were chosen as main parameters for measurements. Furthermore, experiments were conducted to study the effect of the design parameters of the vibrating plate on bubble motion characteristics. The resultant data show that bubble residence time and depth of submergence can be controlled by changing the amplitude, the frequency and the form of the vibration field applied.     

PCR芯片和生化微分析系统

介绍了PCR微芯片的最新研究进展,给出了不同结构的PCR芯片设计原理以及特点,介绍由PCR芯片为主要单元的集成微全分析系统的相关研究,同时简要介绍了对PCR的仿真模拟等。     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Exergy losses in refrigerating systems. A study for performance comparisons in compressor and condenser

A study is carried out to describe irreversibilities in one stage refrigerating process for vapour compression cycle with refrigerant mixtures R-404A, R-410A, R-410B and R-507 as working fluids. They are calculated as exergy losses by an algorithm developed on the basis of thermodynamics. The proposed relationships have been derived from exergy balances on the system components. Emphasis is placed on parameters influencing the losses and the related results are presented through Grassmann diagrams (diagrams of exergy fluxes). Furthermore, detailed information on the variation of cycle's exergy efficiency with evaporating and condensing temperatures is given. Copyright © 2003 John Wiley & Sons, Ltd.     

Combustion of bulk density powder mixtures in a coflow of nitrogen gas: 3. The Ti-(Ti + 0.5C) layered system

Explored is the filtration combustion in Ti-(Ti + 0.5C) layered powder systems in a coflow of nitrogen gas. The presence/absence of nitrogen coflow through the layered system was found to drastically affect the character of wave propagation and structure/properties of product. The obtained data can be regarded as a basis for fabrication of new layered and composite materials in the mode of dynamic filtration combustion.      

An expert decision support system for network routing: a case study

The paper presents a case study of the development of an expert decision support system which uses simple heuristic methods for fast determination of routes for simultaneous signals in a transmission network of limited capacity. It illustrates how heuristic solutions can be embodied in a model-based DSS and how the standard decision support literature, although intuitively appealing, provides little practical assistance in system construction or classification     

CAL delivery selection criteria and authoring systems

Abstract  In the past, authoring systems have been used to generate computer-assisted learning materials that have often followed the rather restrictive programmed learning format. A number of innovative ways of using recently developed systems to develop CAL packages that include a wider range of learning activities (access to data bases, simulations, interactive video, etc.) are described. Analogous to the concept of a media selection model, a computer delivery mode selection model is presented as an aid to decision making for designers. This increase in flexibility should broaden the applicability of computerassisted learning (CAL) to a wider range of educational objectives and raise the level of the cognitive emphasis in learning packages, as well as facilitate the implementation of visually appealing materials. The paper also implies a standard of acceptability for authoring systems.     

SiGe: An attractive material for post-CMOS processing of MEMS

This work gives an overview of the different developments for silicon germanium (Si_1−xGe_x) from a MEMS post-processing perspective. First, the maximum processing temperature that does not introduce any damage or degradation into the standard characteristics of the CMOS driving electronics is specified. Then, the optimal type of silicon and germanium gas sources and deposition technique that results in an economical process are identified. Next, the selection criteria for a low thermal budget doping method and doping species are discussed. Finally, the advantage and disadvantage for the different approaches implemented for enhancing the physical properties of poly Si_1−xGe_x at a CMOS backend compatible temperature are highlighted. It is shown that the optimal method depends on the application requirements and the CMOS technology used for realizing the driving electronics.     

Formation of geothermal resources at lithospheric subduction zones

This paper examines in a very broad fashion the formation of geothermal resources at lithospheric subduction zones. Regions of highly silicic calc-alkaline Quaternary volcanoes and/or plutons have been identified as prime candidates for having high-temperature hydrothermal systems. Regions of large tholeiitic Quaternary volcanoes have been identified as prime candidates for having large moderate-temperature hydrothermal systems. In addition, active magmatic, phreatomagnetic, and/or tectonic fracturing must be occurring in order to keep any moderate to high temperature hydrothermal system from chemically sealing. Connate, meteoric and/or oceanic water sources must also be present. Owing to tectonic and magmatic processes, volcanic arcs of subduction zones represent regions of the crust that have anomalously high mechanical and heat energy. Such arc regions are expected to contain significantly more moderate to high temperature hydrothermal systems than what is presently known. Many of these arcs are briefly discussed with respect to their potential for containing such resources.