Key technologies of layout design of recycling plants of waste refrigerators

The present situations of waste refrigerators recycling and disposing were analyzed. Three key technologies of layout design of recycling plants of waste refrigerators were presented as follows: 1) establishment of recycling process of waste refrigerators; 2) the general plane layout of recycling plants; 3) the detailed layout of workshops of recycling plants. The focus of the three key technologies is to tackle the problem of the detailed layout of workshops of the recycling plants. By adopting Petri net, the model of logistics system of workshops was established and then optimized, and finally the detailed layout chart of recycling plants was gained. By adopting E-factory, the recycling plants were simulated. The results show that the method mentioned is effective. Foundation item: Project(50375044) supported by the National Natural Science Foundation of China     

我国工程建设监理制度的完善

通过对我国建设监理现状的分析，提出了改变目前监理工作中所存在问题的建议，并对我国工程监理制度的完善提出一些意见。     

罐笼承接装置的研究

为矿井提升系统提出了一种新型罐笼承接装置──托罐摇台。它兼有罐座和摇台两者的优点，克服了两者的缺点。文中阐述了结构原理并对其运行理论作了分析和研究。     

加氢裂化工艺辅助操作与管理专家系统的开发与应用

近来，专家系统技术的利用已成火炼油与石油化工专家们感兴趣的问题。本文评述了国外这些领域中专家系统应用的进展概况。同时，对我们开发的专家系统工具ＦＥＸＳ的性能作了简介。详述了工业加氢裂化装置辅助操作与管理专家系统的研制过程和系统配置，讨论了系统开发的经验。最后，评价了该技术在炼油与石油化工业中的应用前景。     

Using rainbow net simulation to measure fault tolerance in a multiprocessor

The Rainbow net simulation technique is applied to modelling the impact of system load and fault handling on the availability of a fault-tolerant multiprocessor architecture. Rainbow nets are described along with the motivation for creating this modelling technique. A Rainbow net fault-handling model is created for the fault-tolerant multiprocessor architecture and the topology is shown to remain constant in size, independent of the number of processor, memory and I/O elements configured in the system. Simulation is performed with a varying load in terms of the number of active jobs the system must support. Results are given showing how the fault-tolerant capability varies with load. Two new metrics for evaluating fault tolerance are introduced; namely full fault-tolerability and partial fault-tolerability. They are based on simple observations in the model.     

用有限带宽反射波波形分析法进行储层横向预测

以正演地震模拟为基础的有限带宽反射波渡形分析法是一种新的储层横向预测方法。首先利用波形分解确定地震反射层的地质属性,找出能反映岩性变化的反射波波形特征参数;然后,采用多元数据聚类分析和灰色系统理论完成储层横向的预测。文中以预测江苏 J 凹陷 F 构造上阜二段生物灰岩分布及厚度横向变化为例,简述了反射波波形分析的全过程。预测结果已为钻探证实。     

多量程数据采集记录装置的设计

通常的数据采集与记录装置不易实现多量程测量。通过对标度方程进行分析得知,要改变量程只须改变两个参数——标度因子和量程下限。我们设计了一个使用单片机的多量程数据采集和记录装置,能处理多达256种量程。本文叙述了算法分析、硬件和软件的设计以及该装置的性能指标。     

A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.     

依纳Ⅴ型牵伸机构的优化设计

对细纱机依纳Ⅴ型牵伸机构进行了优化设计，通过在后牵伸区增加一附加压力棒，对牵伸效果有了较大幅度的提高，并对其产生的毛羽增多的弊病采取了有效措施。     

中原高温高盐油藏疏水缔合聚合物凝胶调剖剂研究

针对中原油田高温(>80℃)、高盐度(>50 g/L)、高硬度(>1 g/L)砂岩油藏,研制了地下成胶的高热稳定性聚合物凝胶调剖剂。所用聚合物为疏水缔合聚合物AP-P4,M=9.0×106,HD=27%,疏水基摩尔分数0.2%;交联剂为可生成酚醛树脂的3种化合物;调剖剂胶液用矿化度160 g/L的马寨油田污水配制;实验温度95℃。根据形成的凝胶黏度(95℃,1.1 s-1)确定交联剂各组分用量为:MZ-YL 0.429%,MZ-BE 0.060%,MZ-XS 0.012%;酸度调整剂用量0.12%;成胶时间10~15小时。2.5、3.0、3.5 g/L AP-P4的凝胶在95℃老化100天后黏度保持在~40 Pa.s及以上。初配制胶液在3000 r/min下剪切15分钟后黏度降低87.5%~89.0%,但成胶后和老化过程中凝胶黏度只比未剪切样降低17.1%~6.6%。3.5 g/L AP-P4的调剖剂对~1μm2的6支储层岩心的堵塞率在88.1%~95.8%范围,平均93.3%,造成的残余阻力系数在15.2~28.6范围,平均19.8,使渗透率级差2.3~8.0的4组双人造岩心的注水流量比发生不同程度的反转。认为该凝胶调剖剂高温下稳定性好的原因,是强化学交联密度低,因而凝胶脱水收缩作用弱。图2表5参5。